wip

1 files changed, 0 insertions, 107 deletions

diff --git a/libusb/tusb_config.h b/libusb/tusb_config.h
deleted file mode 100644
index cb1ca3b..0000000
--- a/libusb/tusb_config.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* tusb_config.h - Compile-time configuration for the TinyUSB library
- *
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- * Copyright (c) 2024 Luke T. Shumaker <lukeshu@lukeshu.com>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#ifndef _TUSB_CONFIG_H_
-#define _TUSB_CONFIG_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-//--------------------------------------------------------------------
-// TinyUSB Device (TUD) initialization for rp2040-based boards
-//--------------------------------------------------------------------
-
-// Which USB port to use for the RootHub.
-// The rp2040 only has 1 port, so it's gotta be port #0.
-#define BOARD_TUD_RHPORT      0
-
-// RHPort max operational speed.
-// Use OPT_MODE_DEFAULT_SPEED for max speed supported by MCU.
-#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
-
-//--------------------------------------------------------------------
-// Configuration: common
-//--------------------------------------------------------------------
-
-// defined by compiler flags
-#ifndef CFG_TUSB_MCU
-#error CFG_TUSB_MCU must be defined
-#endif
-
-// Conditional because it might be defined with `-D` on the command
-// line if `cmake -DCMAKE_BUILD_TYPE=Debug`.
-#ifndef CFG_TUSB_DEBUG
-#define CFG_TUSB_DEBUG        0
-#endif
-
-// USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
-// Tinyusb use follows macros to declare transferring memory so that they can be put
-// into those specific section.
-// e.g
-// - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
-// - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
-#define CFG_TUSB_MEM_SECTION      /* blank */
-#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
-
-#define CFG_TUD_ENABLED       1
-#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
-
-//--------------------------------------------------------------------
-// Configuration: TinyUSB Device (TUD)
-//--------------------------------------------------------------------
-
-// control endpoint max packet size (only 8, 16, 32, or 64 are valid)
-#define CFG_TUD_ENDPOINT0_SIZE    64
-
-// Which of TinyUSB's built-in class drivers to enable.
-//
-// If a class takes an int, that's the maximum number of interfaces of
-// that type that may be listed in the same configuration descriptor.
-#define CFG_TUD_CDC               0 // int : Communications Device Class (e.g. ttyUSB) https://www.usb.org/sites/default/files/CDC1.2_WMC1.1_012011.zip
-#define CFG_TUD_MSC               0 // bool: Mass Storage Class                        https://www.usb.org/sites/default/files/Mass_Storage_Specification_Overview_v1.4_2-19-2010.pdf
-#define CFG_TUD_HID               1 // int : Human Interface Device                    https://www.usb.org/sites/default/files/hid1_11.pdf
-#define CFG_TUD_AUDIO             0 // int : Audio                                     https://www.usb.org/sites/default/files/audio10.pdf
-#define CFG_TUD_VIDEO             0 // int : Video                                     https://www.usb.org/sites/default/files/USB_Video_Class_1_5.zip
-#define CFG_TUD_MIDI              0 // int : Musical Instrument Digital Interface      https://www.usb.org/sites/default/files/USB%20MIDI%20v2_0.pdf
-#define CFG_TUD_VENDOR            0 // int : ???
-#define CFG_TUD_USBTMC            0 // bool: Test & Measurement Class                  https://www.usb.org/sites/default/files/USBTMC_1_006a.zip
-#define CFG_TUD_DFU_RUNTIME       0 // bool: Device Firmware Upgrade                   https://www.usb.org/sites/default/files/DFU_1.1.pdf
-#define CFG_TUD_DFU               0 // bool: Device Firmware Upgrade                   https://www.usb.org/sites/default/files/DFU_1.1.pdf 
-#define CFG_TUD_ECM_RNDIS         0 // bool: net
-#define CFG_TUD_NCM               0 // bool: net
-#define CFG_TUD_BTH               0 // bool: Bluetooth
-
-// HID buffer size Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE    8
-
-//--------------------------------------------------------------------
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _TUSB_CONFIG_H_ */