summaryrefslogtreecommitdiff
path: root/kernels/linux-libre-rt/0008-USB-armory-support.patch
blob: 13b41560476401829993c2922108bf0ccb84bdda (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
From ac49b5026524acf13cbdeef8d5f72257aef3e31d Mon Sep 17 00:00:00 2001
From: Kevin Mihelich <kevin@archlinuxarm.org>
Date: Sat, 7 Mar 2015 16:51:15 -0700
Subject: [PATCH 8/8] USB armory support

---
 arch/arm/boot/dts/Makefile                    |   3 +
 arch/arm/boot/dts/imx53-usbarmory-common.dtsi | 209 ++++++++++++++++++++++++++
 arch/arm/boot/dts/imx53-usbarmory-gpio.dts    |  26 ++++
 arch/arm/boot/dts/imx53-usbarmory-host.dts    |  18 +++
 arch/arm/boot/dts/imx53-usbarmory.dts         |  18 +++
 5 files changed, 274 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx53-usbarmory-common.dtsi
 create mode 100644 arch/arm/boot/dts/imx53-usbarmory-gpio.dts
 create mode 100644 arch/arm/boot/dts/imx53-usbarmory-host.dts
 create mode 100644 arch/arm/boot/dts/imx53-usbarmory.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5586e7a..d54f5f7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -264,6 +264,9 @@ dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-smd.dtb \
 	imx53-tx53-x03x.dtb \
 	imx53-tx53-x13x.dtb \
+	imx53-usbarmory.dtb \
+	imx53-usbarmory-gpio.dtb \
+	imx53-usbarmory-host.dtb \
 	imx53-voipac-bsb.dtb
 dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-apf6dev.dtb \
diff --git a/arch/arm/boot/dts/imx53-usbarmory-common.dtsi b/arch/arm/boot/dts/imx53-usbarmory-common.dtsi
new file mode 100644
index 0000000..c7cbd84
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-usbarmory-common.dtsi
@@ -0,0 +1,209 @@
+/*
+ * USB armory MkI device tree include file
+ * http://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio4_27>;
+
+		user {
+			label = "LED";
+			gpios = <&gpio4 27 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	soc {
+		aips@60000000 {
+			sahara: crypto@63ff8000 {
+				compatible = "fsl,imx53-sahara";
+				reg = <0x63ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+		};
+	};
+};
+
+&cpu0 {
+	device_type = "cpu";
+	compatible = "arm,cortex-a8";
+	reg = <0x0>;
+	clocks = <&clks IMX5_CLK_ARM>;
+	clock-latency = <61036>;
+	voltage-tolerance = <5>;
+	operating-points = <
+		/* kHz */
+		 166666  850000
+		 400000  900000
+		 800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx53-usbarmory {
+		pinctrl_pinheader: pinheadergrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__GPIO5_26	0xc0
+				MX53_PAD_CSI0_DAT9__GPIO5_27	0xc0
+				MX53_PAD_CSI0_DAT10__GPIO5_28	0xc0
+				MX53_PAD_CSI0_DAT11__GPIO5_29	0xc0
+				MX53_PAD_CSI0_DAT12__GPIO5_30	0xc0
+			>;
+		};
+
+		led_pin_gpio4_27: led_gpio4_27@0 {
+			fsl,pins = <
+				MX53_PAD_DISP0_DAT6__GPIO4_27 0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA	0xc0000000
+				MX53_PAD_CSI0_DAT9__I2C1_SCL	0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+		pinctrl_gpio5: gpio5grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__GPIO5_26 0xc0
+				MX53_PAD_CSI0_DAT9__GPIO5_27 0xc0
+				MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0
+				MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0
+				MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&i2c1 {
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-usbarmory-gpio.dts b/arch/arm/boot/dts/imx53-usbarmory-gpio.dts
new file mode 100644
index 0000000..bf85ffa
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-usbarmory-gpio.dts
@@ -0,0 +1,26 @@
+/*
+ * USB armory MkI device mode device tree file
+ * http://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "imx53-usbarmory-common.dtsi"
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_pinheader>;
+};
+
+&uart1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx53-usbarmory-host.dts b/arch/arm/boot/dts/imx53-usbarmory-host.dts
new file mode 100644
index 0000000..ea2ea45
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-usbarmory-host.dts
@@ -0,0 +1,18 @@
+/*
+ * USB armory MkI host mode device tree file
+ * http://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "imx53-usbarmory-common.dtsi"
+
+&usbotg {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
new file mode 100644
index 0000000..902a73b
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -0,0 +1,18 @@
+/*
+ * USB armory MkI device mode device tree file
+ * http://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "imx53-usbarmory-common.dtsi"
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
-- 
2.4.5