remove parabola suffix and add complex pkgrel on the packages

9 files changed, 1340 insertions, 0 deletions

diff --git a/libre/texlive-bin/09-texlive-fonts.conf b/libre/texlive-bin/09-texlive-fonts.conf
new file mode 100644
index 000000000..f870fbd7a
--- /dev/null
+++ b/libre/texlive-bin/09-texlive-fonts.conf
@@ -0,0 +1,9 @@
+<?xml version="1.0"?>
+<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
+<fontconfig>
+  <dir>/usr/share/texmf-dist/fonts/opentype</dir>
+  <dir>/usr/share/texmf-dist/fonts/truetype</dir>
+  <dir>/usr/local/share/texmf/fonts/opentype</dir>
+  <dir>/usr/local/share/texmf/fonts/truetype</dir>
+</fontconfig>
+
diff --git a/libre/texlive-bin/PKGBUILD b/libre/texlive-bin/PKGBUILD
new file mode 100644
index 000000000..3717a196b
--- /dev/null
+++ b/libre/texlive-bin/PKGBUILD
@@ -0,0 +1,320 @@
+# $Id: PKGBUILD 219723 2014-08-13 23:38:09Z remy $
+# Maintainer (Arch): Rémy Oudompheng <remy@archlinux.org>
+# Contributor (Arch): francois <francois.archlinux.org>
+# Maintainer: Michał Masłowski <mtjm@mtjm.eu>
+# Contributor: André Silva <emulatorman@parabola.nu>
+
+pkgname=texlive-bin
+pkgver=2014.34260
+pkgrel=1.parabola1
+pkgdesc="TeX Live binaries, without biber binaries (Parabola rebranded)"
+license=('GPL')
+arch=('i686' 'x86_64' 'mips64el')
+depends=('cairo' 'pixman' 'graphite' 't1lib' 'gd' 'poppler'
+         'libsigsegv' 'zziplib' 'libpng' 'libjpeg' 'freetype2'
+         'icu' 'harfbuzz' 'harfbuzz-icu')
+makedepends=('perl' 'clisp' 'ffcall')
+optdepends=('ed: for texconfig')
+provides=('lcdf-typetools' 'kpathsea' 'xindy' 'pdfjam')
+conflicts=('pdfjam' 'texlive-bin-libre' 'texlive-bin-parabola')
+replaces=('texlive-bin-libre' 'texlive-bin-parabola')
+options=('!strip')
+url='http://tug.org/texlive/'
+install="texlive.install"
+source=('fix-fontforge-encoding.patch'
+        "http://mirrors.kernel.org/archlinux/other/texlive/texlive-bin-source-${pkgver}.tar.xz"
+)
+md5sums=('bfb9716aa00c86c08cd31e5b32edeb98'
+         'b6fe9a6e6b3df0d69e804b87370039ef')
+
+prepare() {
+    cd source
+    true
+}
+
+build() {
+   cd "$srcdir"
+
+   if [ "${CARCH}" != "i686" ]; then
+     export CFLAGS="${CFLAGS} -fPIC"
+     export CXXFLAGS="${CXXFLAGS} -fPIC"
+   fi
+
+   # this patch removes spurious error message with locale "xx_YY.utf8"
+   #patch -Np0 -i fix-fontforge-encoding.patch
+   # t4ht expects to be un /usr/share/texmf/bin/t4ht (FS#27251)
+   sed -i s/SELFAUTOPARENT/TEXMFROOT/ source/texk/tex4htk/t4ht.c
+   #############################################################
+   ### configure
+   cd source
+   ## prevent compiling Xdvi with libXp
+   sed -i~ 's|-lXp ||' texk/xdvik/configure
+   test ! -d Work && mkdir Work
+   cd Work
+   echo "--> Initial configuration..."
+   # we use temporary prefix to avoid messing the existing
+   # $pkgdir/usr/share/texmf tree
+   # system zlib is disabled due to issues with zlib 1.2.6 (FS#28221)
+   ../configure --prefix=/usr -C \
+     --sysconfdir=/etc \
+     --datarootdir=/usr/share \
+     --datadir=/usr/share \
+     --mandir=/usr/share/man \
+     --disable-native-texlive-build \
+     --with-banner-add="/Parabola GNU/Linux-libre" \
+     --disable-multiplatform \
+     --disable-dialog \
+     --disable-psutils \
+     --disable-t1utils \
+     --disable-bibtexu \
+     --disable-xz \
+     --enable-shared \
+     --disable-static \
+     --with-system-zlib \
+     --with-system-zziplib \
+     --with-system-pnglib \
+     --with-system-ncurses \
+     --with-system-t1lib \
+     --with-system-gd \
+     --with-system-poppler \
+     --with-system-xpdf \
+     --with-system-freetype2 \
+     --with-system-pixman \
+     --with-system-cairo \
+     --with-system-harfbuzz \
+     --with-system-graphite \
+     --with-system-icu \
+     --with-freetype2-libdir=/usr/lib \
+     --with-freetype2-include=/usr/include/freetype2 \
+     --with-xdvi-x-toolkit=xaw \
+     --disable-dump-share \
+     --disable-aleph \
+     --enable-luatex \
+     --with-clisp-runtime=default \
+     --enable-xindy --disable-xindy-rules --disable-xindy-docs
+   #############################################################
+   ### make
+   echo "-------------------------------------------------------"
+   echo "--> Building the whole beast ..."
+   echo "-------------------------------------------------------"
+   make
+}
+
+package() {
+   cd "$srcdir"
+
+   #############################################################
+   ### install
+   cd source
+   # fixes for xindy
+   find utils/xindy -name Makefile -exec sed -i -e "s|^prefix =.\+$|prefix = $pkgdir/usr|" -e "s|^mandir =.\+$|mandir = \${prefix}/share/man|" -e "s|^datadir =.\+$|datadir = \${datarootdir}/texmf|" -e "s|^docdir =.\+$|docdir = \${datadir}/doc/xindy|" '{}' \;
+
+   echo "-------------------------------------------------------"
+   echo "--> Proceeding with make install ..."
+   echo "-------------------------------------------------------"
+   cd Work
+   make DESTDIR="${pkgdir}" texmf="$pkgdir"/usr/share/texmf install
+   rm -rf "${pkgdir}"/usr/{texmf,share/texmf-dist}
+
+
+   ## symlink engines by hand. texlinks has moved to texlive-core...
+   mkdir -p ${pkgdir}/usr/bin
+   ln -s eptex ${pkgdir}/usr/bin/platex
+   ln -s euptex ${pkgdir}/usr/bin/uplatex
+   ln -s luatex ${pkgdir}/usr/bin/dvilualatex
+   ln -s luatex ${pkgdir}/usr/bin/dviluatex
+   ln -s luatex ${pkgdir}/usr/bin/lualatex
+   ln -s luatex ${pkgdir}/usr/bin/lualollipop
+   ln -s pdftex ${pkgdir}/usr/bin/amstex
+   ln -s pdftex ${pkgdir}/usr/bin/cslatex
+   ln -s pdftex ${pkgdir}/usr/bin/csplain
+   ln -s pdftex ${pkgdir}/usr/bin/eplain
+   ln -s pdftex ${pkgdir}/usr/bin/etex
+   ln -s pdftex ${pkgdir}/usr/bin/jadetex
+   ln -s pdftex ${pkgdir}/usr/bin/latex
+   ln -s pdftex ${pkgdir}/usr/bin/lollipop
+   ln -s pdftex ${pkgdir}/usr/bin/mex
+   ln -s pdftex ${pkgdir}/usr/bin/mllatex
+   ln -s pdftex ${pkgdir}/usr/bin/mltex
+   ln -s pdftex ${pkgdir}/usr/bin/pdfetex
+   ln -s pdftex ${pkgdir}/usr/bin/pdfcslatex
+   ln -s pdftex ${pkgdir}/usr/bin/pdfcsplain
+   ln -s pdftex ${pkgdir}/usr/bin/pdfjadetex
+   ln -s pdftex ${pkgdir}/usr/bin/pdflatex
+   ln -s pdftex ${pkgdir}/usr/bin/pdfmex
+   ln -s pdftex ${pkgdir}/usr/bin/pdfxmltex
+   ln -s pdftex ${pkgdir}/usr/bin/texsis
+   ln -s pdftex ${pkgdir}/usr/bin/utf8mex
+   ln -s pdftex ${pkgdir}/usr/bin/xmltex
+   ln -s xetex ${pkgdir}/usr/bin/xelatex
+   ln -s xetex ${pkgdir}/usr/bin/xelollipop
+
+   #############################################################
+   # remove dangling symlinks
+   _bibtexextra_scripts="
+bibexport
+listbib
+multibibliography
+urlbst
+"
+   _core_scripts="
+a2ping
+a5toa4
+adhocfilelist
+afm2afm
+allcm
+allec
+allneeded
+arara
+arlatex
+autoinst
+bundledoc
+checkcites
+chkweb
+context
+contextjit
+ctanify
+ctanupload
+de-macro
+depythontex
+deweb
+dosepsbin
+dtxgen
+dvi2fax
+dviasm
+dvired
+e2pall
+epstopdf
+findhyph
+fmtutil
+fmtutil-sys
+fontinst
+fragmaster
+installfont-tl
+kpsepath
+kpsetool
+kpsewhere
+kpsexpand
+latex-git-log
+latex2man
+latexdiff
+latexdiff-vc
+latexfileversion
+latexindent
+latexmk
+latexpand
+latexrevise
+listings-ext.sh
+ltxfileinfo
+ltximg
+lua2dox_filter
+luaotfload-tool
+luatools
+match_parens
+mf2pt1
+mkjobtexmf
+mkluatexfontdb
+mkt1font
+mktexfmt
+mptopdf
+mtxrun
+mtxrunjit
+ot2kpx
+pdf180
+pdf270
+pdf90
+pdfatfi
+pdfbook
+pdfcrop
+pdfflip
+pdfjam
+pdfjam-pocketmod
+pdfjam-slides3up
+pdfjam-slides6up
+pdfjoin
+pdfnup
+pdfpun
+pfarrei
+pkfix
+pkfix-helper
+ps2eps
+ps2frag
+pslatex
+purifyeps
+pythontex
+repstopdf
+rpdfcrop
+rungs
+simpdftex
+sty2dtx
+texconfig
+texconfig-dialog
+texconfig-sys
+texcount
+texdef
+texdiff
+texdirflatten
+texdoc
+texdoctk
+texexec
+texfot
+texindy
+texlinks
+texliveonfly
+texloganalyser
+texmfstart
+thumbpdf
+typeoutfileinfo
+updmap
+updmap-sys
+vpl2ovp
+vpl2vpl
+xindy
+"
+   _games_scripts="rubikrotation"
+   _htmlxml_scripts="ht htcontext htlatex htmex httex httexi htxelatex htxetex mk4ht"
+   _langcyrillic_scripts="rubibtex rumakeindex"
+   _langextra_scripts="ebong"
+   _langgreek_scripts="mkgrkindex"
+   _langjapanese_scripts="convbkmk ptex2pdf
+kanji-fontmap-creator
+kanji-config-updmap
+kanji-config-updmap-sys
+"
+   _langkorean_scripts="jamo-normalize komkindex ttf2kotexfont"
+   _latexextra_scripts="
+authorindex
+exceltex
+makeglossaries
+pdfannotextractor
+perltex
+ps4pdf
+splitindex
+svn-multi
+vpe"
+   _music_scripts="lily-glyph-commands lily-image-commands lily-rebuild-pdfs
+m-tx musixtex musixflx pmx2pdf pmxchords"
+   _pictures_scripts="cachepic epspdf epspdftk fig4latex mathspic mkpic"
+   _pstricks_scripts="pedigree pst2pdf"
+   _science_scripts="ulqda"
+   for s in \
+        ${_bibtexextra_scripts} \
+        ${_core_scripts}       \
+        ${_games_scripts}       \
+        ${_htmlxml_scripts}    \
+        ${_langcyrillic_scripts} \
+        ${_langextra_scripts}    \
+        ${_langgreek_scripts}    \
+        ${_langjapanese_scripts} \
+        ${_langkorean_scripts} \
+        ${_latexextra_scripts} \
+        ${_music_scripts}      \
+        ${_pictures_scripts}   \
+        ${_pstricks_scripts}   \
+        ${_science_scripts}    \
+        tlmgr; do
+       ! readlink -e "$pkgdir"/usr/bin/$s && rm "$pkgdir"/usr/bin/$s
+   done
+   ###################################################################
+}
+
diff --git a/libre/texlive-bin/fix-fontforge-encoding.patch b/libre/texlive-bin/fix-fontforge-encoding.patch
new file mode 100644
index 000000000..8104b3289
--- /dev/null
+++ b/libre/texlive-bin/fix-fontforge-encoding.patch
@@ -0,0 +1,12 @@
+--- source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c.orig	2009-09-30 19:27:00.935039526 +0200
++++ source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c	2009-09-30 19:28:04.908364646 +0200
+@@ -495,6 +495,9 @@
+ 	{ "Big5HKSCS", e_big5hkscs },
+ 	{ "Big5-HKSCS", e_big5hkscs },
+ 	{ "UTF-8", e_utf8 },
++	{ "utf-8", e_utf8 },
++	{ "UTF8", e_utf8 },
++	{ "utf8", e_utf8 },
+ 	{ "ISO-10646/UTF-8", e_utf8 },
+ 	{ "ISO_10646/UTF-8", e_utf8 },
+ 	{ "UCS2", e_unicode },
diff --git a/libre/texlive-bin/luatex-poppler-0.20.patch b/libre/texlive-bin/luatex-poppler-0.20.patch
new file mode 100644
index 000000000..175824f3e
--- /dev/null
+++ b/libre/texlive-bin/luatex-poppler-0.20.patch
@@ -0,0 +1,77 @@
+--- source/texk/web2c/luatexdir/lua/lepdflib.cc.orig	2011-10-06 06:14:20.000000000 +0000
++++ source/texk/web2c/luatexdir/lua/lepdflib.cc	2012-05-17 11:30:26.327236883 +0000
+@@ -157,7 +157,7 @@
+         pdfdoc_changed_error(L);
+     uout = new_Annot_userdata(L);
+     uout->d =
+-        new Annot((XRef *) uxref->d, (Dict *) udict->d, (Catalog *) ucatalog->d,
++        new Annot((PDFDoc *) uxref->pd, (Dict *) udict->d,
+                   (Object *) uref->d);
+     uout->atype = ALLOC_LEPDF;
+     uout->pc = uxref->pc;
+@@ -179,7 +179,7 @@
+         pdfdoc_changed_error(L);
+     uout = new_Annots_userdata(L);
+     uout->d =
+-        new Annots((XRef *) uxref->d, (Catalog *) ucatalog->d,
++        new Annots((PDFDoc *) uxref->pd,
+                    (Object *) uannotsobj->d);
+     uout->atype = ALLOC_LEPDF;
+     uout->pc = uxref->pc;
+@@ -369,7 +369,7 @@
+ // Annot
+ 
+ m_poppler_get_BOOL(Annot, isOk);
+-m_poppler_get_OBJECT(Annot, getAppearance);
++m_poppler_get_OBJECT(Annot, getAppearanceResDict);
+ m_poppler_get_poppler(Annot, AnnotBorder, getBorder);
+ 
+ static int m_Annot_match(lua_State * L)
+@@ -408,7 +408,7 @@
+ 
+ static const struct luaL_Reg Annot_m[] = {
+     {"isOk", m_Annot_isOk},
+-    {"getAppearance", m_Annot_getAppearance},
++    {"getAppearance", m_Annot_getAppearanceResDict},
+     {"getBorder", m_Annot_getBorder},
+     {"match", m_Annot_match},
+     {"__tostring", m_Annot__tostring},
+@@ -1433,7 +1433,7 @@
+ 
+ static int m_Object_getTypeName(lua_State * L)
+ {
+-    char *s;
++    const char *s;
+     udstruct *uin;
+     uin = (udstruct *) luaL_checkudata(L, 1, M_Object);
+     if (uin->pd != NULL && uin->pd->pc != uin->pc)
+@@ -2120,7 +2120,7 @@
+     if ((uin->pd != NULL && uin->pd->pc != uin->pc)
+         || (ucat->pd != NULL && ucat->pd->pc != ucat->pd->pc))
+         pdfdoc_changed_error(L);
+-    links = ((Page *) uin->d)->getLinks((Catalog *) ucat->d);
++    links = ((Page *) uin->d)->getLinks();
+     if (links != NULL) {
+         uout = new_Links_userdata(L);
+         uout->d = links;
+@@ -2738,7 +2738,10 @@
+     return 1;
+ }
+ 
+-m_poppler_get_INT(XRef, getSize);
++static int m_XRef_getSize(lua_State * L)
++{
++    return m_XRef_getNumObjects(L);
++}
+ 
+ static int m_XRef_getEntry(lua_State * L)
+ {
+@@ -2748,7 +2751,7 @@
+     if (uin->pd != NULL && uin->pd->pc != uin->pc)
+         pdfdoc_changed_error(L);
+     i = luaL_checkint(L, 2);
+-    size = ((XRef *) uin->d)->getSize();
++    size = ((XRef *) uin->d)->getNumObjects();
+     if (i > 0 && i <= size) {
+         uout = new_XRefEntry_userdata(L);
+         uout->d = ((XRef *) uin->d)->getEntry(i);
diff --git a/libre/texlive-bin/luatex-r4449-radical-rule-thickness.patch b/libre/texlive-bin/luatex-r4449-radical-rule-thickness.patch
new file mode 100644
index 000000000..f925a1a93
--- /dev/null
+++ b/libre/texlive-bin/luatex-r4449-radical-rule-thickness.patch
@@ -0,0 +1,23 @@
+Index: source/texk/web2c/luatexdir/tex/mlist.w
+===================================================================
+--- source/texk/web2c/luatexdir/tex/mlist.w	(revision 4448)
++++ source/texk/web2c/luatexdir/tex/mlist.w	(revision 4449)
+@@ -1798,7 +1798,17 @@
+         theta = fraction_rule(cur_style);
+         y = var_delimiter(left_delimiter(q), cur_size,
+                           height(x) + depth(x) + clr + theta, NULL, cur_style);
+-        theta = height(y);
++	/* If |y| is a composite then set |theta| to the height of its top
++           character, else set it to the height of |y|. */
++        if (list_ptr(y) != null
++            && type(list_ptr(y)) == hlist_node
++            && list_ptr(list_ptr(y)) != null
++            && type(list_ptr(list_ptr(y))) == glyph_node) {     /* and it should be */
++            theta = char_height(font(list_ptr(list_ptr(y))),
++                           character(list_ptr(list_ptr(y))));
++        } else {
++            theta = height(y);
++        }
+     } else {
+         y = var_delimiter(left_delimiter(q), cur_size,
+                           height(x) + depth(x) + clr + theta, NULL, cur_style);
diff --git a/libre/texlive-bin/poppler-0.20.patch b/libre/texlive-bin/poppler-0.20.patch
new file mode 100644
index 000000000..3bd8183ab
--- /dev/null
+++ b/libre/texlive-bin/poppler-0.20.patch
@@ -0,0 +1,22 @@
+--- source/texk/web2c/luatexdir/lua/lepdflib.cc.orig	2011-10-06 06:14:20.000000000 +0000
++++ source/texk/web2c/luatexdir/lua/lepdflib.cc	2012-05-17 11:30:26.327236883 +0000
+@@ -1433,7 +1433,7 @@
+ 
+ static int m_Object_getTypeName(lua_State * L)
+ {
+-    char *s;
++    const char *s;
+     udstruct *uin;
+     uin = (udstruct *) luaL_checkudata(L, 1, M_Object);
+     if (uin->pd != NULL && uin->pd->pc != uin->pc)
+--- source/texk/web2c/pdftexdir/pdftosrc.cc.orig	2012-06-24 17:12:34.376329435 +0200
++++ source/texk/web2c/pdftexdir/pdftosrc.cc	2012-06-24 17:12:25.490003152 +0200
+@@ -134,7 +134,7 @@
+         exit(1);
+     }
+     if (extract_xref_table) {
+-        int size = xref->getSize();
++        int size = xref->getNumObjects();
+         int i;
+         for (i = 0; i < size; i++) {
+             if (xref->getEntry(i)->offset == 0xffffffff)
diff --git a/libre/texlive-bin/poppler-0.26.patch b/libre/texlive-bin/poppler-0.26.patch
new file mode 100644
index 000000000..fde123f62
--- /dev/null
+++ b/libre/texlive-bin/poppler-0.26.patch
@@ -0,0 +1,104 @@
+--- trunk/source/texk/web2c/luatexdir/image/epdf.h	2013/01/20 19:58:26	4559
++++ trunk/source/texk/web2c/luatexdir/image/epdf.h	2014/01/02 15:35:31	4718
+@@ -40,21 +40,22 @@
+ #  include <goo/GooString.h>
+ #  include <goo/gmem.h>
+ #  include <goo/gfile.h>
+-#  include "Object.h"
+-#  include "Stream.h"
+-#  include "Gfx.h"
+-#  include "Annot.h"
+-#  include "Array.h"
+-#  include "Dict.h"
+-#  include "XRef.h"
+-#  include "Catalog.h"
+-#  include "Link.h"
+-#  include "Page.h"
+-#  include "GfxFont.h"
+-#  include "PDFDoc.h"
+-#  include "GlobalParams.h"
+-#  include "Error.h"
+-#  include "FileSpec.h"
++#  include <Object.h>
++#  include <Stream.h>
++#  include <Gfx.h>
++#  include <Annot.h>
++#  include <Array.h>
++#  include <Dict.h>
++#  include <XRef.h>
++#  include <Catalog.h>
++#  include <StructTreeRoot.h>
++#  include <Link.h>
++#  include <Page.h>
++#  include <GfxFont.h>
++#  include <PDFDoc.h>
++#  include <GlobalParams.h>
++#  include <Error.h>
++#  include <FileSpec.h>
+ 
+ extern "C" {
+ 
+@@ -81,8 +82,8 @@
+ #  include "utils/avlstuff.h"
+ #  include "pdf/pdftypes.h"
+ 
+-#  include "lua52/lua.h"
+-#  include "lua52/lauxlib.h"
++#  include "lua.h"
++#  include "lauxlib.h"
+ 
+     /* pdfgen.w */
+     extern int ten_pow[10];
+--- trunk/source/texk/web2c/luatexdir/lua/lepdflib.cc	2013/04/05 10:54:08	4629
++++ trunk/source/texk/web2c/luatexdir/lua/lepdflib.cc	2014/01/02 15:35:31	4718
+@@ -65,6 +65,7 @@
+ #define M_PDFRectangle     "PDFRectangle"
+ #define M_Ref              "Ref"
+ #define M_Stream           "Stream"
++#define M_StructTreeRoot   "StructTreeRoot"
+ #define M_XRefEntry        "XRefEntry"
+ #define M_XRef             "XRef"
+ 
+@@ -96,6 +97,7 @@
+ new_poppler_userdata(PDFRectangle);
+ new_poppler_userdata(Ref);
+ new_poppler_userdata(Stream);
++new_poppler_userdata(StructTreeRoot);
+ new_poppler_userdata(XRef);
+ 
+ //**********************************************************************
+@@ -573,7 +575,11 @@
+ 
+ m_poppler_get_GOOSTRING(Catalog, getBaseURI);
+ m_poppler_get_GOOSTRING(Catalog, readMetadata);
++#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT
+ m_poppler_get_poppler(Catalog, Object, getStructTreeRoot);
++#else
++m_poppler_get_poppler(Catalog, StructTreeRoot, getStructTreeRoot);
++#endif
+ 
+ static int m_Catalog_findPage(lua_State * L)
+ {
+@@ -2146,14 +2152,22 @@
+ 
+ static int m_PDFDoc_getStructTreeRoot(lua_State * L)
+ {
++#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT
+     Object *obj;
++#else
++    StructTreeRoot *obj;
++#endif
+     udstruct *uin, *uout;
+     uin = (udstruct *) luaL_checkudata(L, 1, M_PDFDoc);
+     if (uin->pd != NULL && uin->pd->pc != uin->pc)
+         pdfdoc_changed_error(L);
+     if (((PdfDocument *) uin->d)->doc->getCatalog()->isOk()) {
+         obj = ((PdfDocument *) uin->d)->doc->getStructTreeRoot();
++#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT
+         uout = new_Object_userdata(L);
++#else
++        uout = new_StructTreeRoot_userdata(L);
++#endif
+         uout->d = obj;
+         uout->pc = uin->pc;
+         uout->pd = uin->pd;
diff --git a/libre/texlive-bin/texlive.install b/libre/texlive-bin/texlive.install
new file mode 100644
index 000000000..a2b86eb1f
--- /dev/null
+++ b/libre/texlive-bin/texlive.install
@@ -0,0 +1,49 @@
+infodir=usr/share/info
+filelist=(dvipng.info dvips.info eplain.info epspdf.info fontname.info kpathsea.info latex2e-es.info latex2e.info latex2man.info mf2pt1.info tds.info texdraw.info web2c.info)
+
+post_install() {
+  if [[ -f usr/bin/mktexlsr ]]; then
+    echo    ">>> texlive: updating the filename database..."
+    usr/bin/mktexlsr
+  fi
+  if [[ -f usr/bin/fmtutil-sys ]]; then
+    echo -n   "creating all formats..."
+    usr/bin/fmtutil-sys --all 1>/dev/null
+    echo      " done." 
+    echo      " (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)"
+  fi
+  [[ -x usr/bin/install-info ]] || return 0
+  for file in "${filelist[@]}"; do
+    install-info "$infodir/$file.gz" "$infodir/dir" 2> /dev/null
+  done
+}
+
+post_upgrade() {
+  local corename corever _pacout
+  if [[ -f usr/bin/mktexlsr ]]; then
+    echo    ">>> texlive: updating the filename database..."
+    usr/bin/mktexlsr
+  fi
+  _pacout=$(pacman -Q texlive-core 2>/dev/null)
+  read corename corever <<< ${_pacout}
+  # only recreate formats if texlive-core has right version
+  if [[ ${corever} == 2014* ]]; then
+      if [[ -f usr/bin/fmtutil-sys ]]; then
+        echo -n   "recreating all formats..."
+        usr/bin/fmtutil-sys --all 1>/dev/null
+        echo      " done." 
+        echo      " (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)"
+      fi
+  fi
+  [[ -x usr/bin/install-info ]] || return 0
+  for file in "${filelist[@]}"; do
+    install-info "$infodir/$file.gz" "$infodir/dir" 2> /dev/null
+  done
+}
+
+pre_remove() {
+  [[ -x usr/bin/install-info ]] || return 0
+  for file in "${filelist[@]}"; do
+    install-info --delete "$infodir/$file.gz" "$infodir/dir" 2> /dev/null
+  done
+}
diff --git a/libre/texlive-bin/texmf.cnf b/libre/texlive-bin/texmf.cnf
new file mode 100644
index 000000000..76975ee5c
--- /dev/null
+++ b/libre/texlive-bin/texmf.cnf
@@ -0,0 +1,724 @@
+% texmf.cnf for TeXLive/Arch Linux -- runtime path configuration file for kpathsea.
+% Public domain.
+% 
+% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
+% updated.  Instead, put your changes -- and only your changes, not an
+% entire copy of the full texmf.cnf! -- in ../../texmf.cnf.  That is, if
+% this file is installed in /some/path/to/texlive/2011/texmf/web2c/texmf.cnf,
+% add your custom settings to /some/path/to/texlive/2011/texmf.cnf.
+% 
+% What follows is a super-summary of what this .cnf file can
+% contain. Please read the Kpathsea manual for more information.
+%
+% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
+% The `=' (and surrounding spaces) is optional.
+% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
+% Long lines can be continued with a \.
+%
+% Earlier entries (in the same or another file) override later ones, and
+% an environment variable foo overrides any texmf.cnf definition of foo.
+%
+% All definitions are read before anything is expanded, so you can use
+% variables before they are defined.
+%
+% If a variable assignment is qualified with `.PROGRAM', it is ignored
+% unless the current executable (last filename component of argv[0]) is
+% named PROGRAM.  This foo.PROGRAM construct is not recognized on the
+% right-hand side. For environment variables, use FOO_PROGRAM.
+%
+% Which file formats use which paths for searches is described in the
+% various programs' and the Kpathsea documentation (http://tug.org/kpathsea).
+%
+% // means to search subdirectories (recursively).
+% A leading !! means to look only in the ls-R db, never on the disk.
+% In this file, either ; or : can be used to separate path components.
+% A leading/trailing/doubled path separator in the paths will be
+%   expanded into the compile-time default. Probably not what you want.
+%
+% Brace notation is supported, for example: /usr/local/{mytex,othertex}
+% expands to /usr/local/mytex:/usr/local/othertex.  We make extensive
+% use of this.
+
+
+%  Part 1: Search paths and directories.
+
+% This is the parent directory of our several trees, i.e.,
+% /usr/local/texlive/YYYY in the original TeX Live distribution.
+%
+% All trees must be organized according to the TeX Directory Structure
+% (http://tug.org/tds), or files may not be found.
+%
+% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
+TEXMFROOT = $SELFAUTODIR/share
+
+% The tree containing runtime files related to the specific
+% distribution and version.
+TEXMFMAIN = $TEXMFROOT/texmf
+
+% The main tree of packages, distribution-agnostic:
+TEXMFDIST = $TEXMFROOT/texmf-dist
+
+% Local additions to the distribution trees.
+TEXMFLOCAL = /usr/local/share/texmf
+
+% TEXMFSYSVAR, where *-sys store cached runtime data.
+TEXMFSYSVAR = /var/lib/texmf
+
+% TEXMFSYSCONFIG, where *-sys store configuration data.
+TEXMFSYSCONFIG = /etc/texmf
+
+% Per-user texmf tree(s) -- organized per the TDS, as usual.  To define
+% more than one per-user tree, set this to a list of directories in
+% braces, as described above.  (This used to be HOMETEXMF.)  ~ expands
+% to %USERPROFILE% on Windows, $HOME otherwise.
+TEXMFHOME = ~/texmf
+
+% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data.
+TEXMFVAR = ~/.texlive/texmf-var
+
+% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data.
+TEXMFCONFIG = ~/.texlive/texmf-config
+
+% List all the texmf trees.
+%
+% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
+% explicitly and before all other trees.
+% 
+% TEXMFLOCAL follows TEXMFMAIN (and precedes TEXMFDIST) because the
+% files in TEXMFMAIN are tightly coupled with the particular version of
+% the distribution, such as configuration files.  Overriding them would
+% be more likely to cause trouble than help.  On the other hand, the
+% bulk of packages and fonts are in TEXMFDIST, and locally-installed
+% versions should take precedence over those -- although it is generally
+% a source of confusion to have different versions of a package
+% installed, whatever the trees, so try to avoid it.
+TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
+
+% Where to look for ls-R files.  There need not be an ls-R in the
+% directories in this path, but if there is one, Kpathsea will use it.
+% By default, this is only the !! elements of TEXMF, so that mktexlsr
+% does not create ls-R files in the non-!! elements -- because if an
+% ls-R is present, it will be used, and the disk will not be searched.
+% This is arguably a bug in kpathsea.
+TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
+
+% The system trees.  These are the trees that are shared by all users.
+% If a tree appears in this list, the mktex* scripts will use
+% VARTEXFONTS for generated files, if the original tree isn't writable;
+% otherwise the current working directory is used.
+SYSTEXMF = $TEXMFSYSVAR;$TEXMFMAIN;$TEXMFLOCAL;$TEXMFDIST
+
+% Where generated fonts may be written.  This tree is used when the sources
+% were found in a system tree and either that tree wasn't writable, or the
+% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
+VARTEXFONTS = $TEXMFVAR/fonts
+
+% On some systems, there will be a system tree which contains all the font
+% files that may be created as well as the formats.  For example
+%   TEXMFVAR = /var/lib/texmf
+% is used in many distros.  In this case, set VARTEXFONTS like this
+%VARTEXFONTS = $TEXMFVAR/fonts
+% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
+%
+% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
+% one of the TEXMF directories (avoids overlapping ls-R files).
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Usually you will not need to edit any of the following variables.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% WEB2C is for Web2C specific files.  The current directory may not be
+% a good place to look for them.
+WEB2C = $TEXMF/web2c
+
+% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
+% or \openin, including .sty, .eps, etc.  We specify paths for all known
+% formats, past or present.  Not all of them are built these days.
+
+% Plain TeX.  Have the command tex check all directories as a last
+% resort, we may have plain-compatible stuff anywhere.
+TEXINPUTS.tex           = .;$TEXMF/tex/{plain,generic,}//
+
+% Fontinst needs to read afm files.
+TEXINPUTS.fontinst      = .;$TEXMF/{tex,fonts/afm}//
+
+% Other plain-based formats.
+TEXINPUTS.amstex        = .;$TEXMF/tex/{amstex,plain,generic,}//
+TEXINPUTS.csplain       = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.eplain        = .;$TEXMF/tex/{eplain,plain,generic,}//
+TEXINPUTS.ftex          = .;$TEXMF/tex/{formate,plain,generic,}//
+TEXINPUTS.mex           = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.texinfo       = .;$TEXMF/tex/{texinfo,plain,generic,}//
+
+% LaTeX 2e specific macros are stored in latex/, macros that can only be
+% used with 2.09 in latex209/.  In addition, we look in the directory
+% latex209, useful for macros that were written for 2.09 and do not
+% mention 2e at all, but can be used with 2e.
+TEXINPUTS.cslatex       = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.latex         = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.latex209      = .;$TEXMF/tex/{latex209,generic,latex,}//
+TEXINPUTS.olatex        = .;$TEXMF/tex/{latex,generic,}//
+
+% MLTeX.
+TEXINPUTS.frlatex       = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frtex         = .;$TEXMF/tex/{french,plain,generic,}//
+TEXINPUTS.mllatex       = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.mltex         = .;$TEXMF/tex/{plain,generic,}//
+
+% e-TeX.
+TEXINPUTS.elatex        = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.etex          = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfTeX.
+TEXINPUTS.pdfcslatex    = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.pdfcsplain    = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.pdflatex      = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfmex        = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.utf8mex       = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdftex        = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.pdftexinfo    = .;$TEXMF/tex/{texinfo,plain,generic,}//
+TEXINPUTS.pdfamstex     = .;$TEXMF/tex/{amstex,plain,generic,}//
+
+% pdfeTeX.
+TEXINPUTS.pdfelatex     = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfetex       = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfxTeX.
+TEXINPUTS.pdfxlatex     = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfxmex       = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdfxtex       = .;$TEXMF/tex/{plain,generic,}//
+
+% LuaTeX.
+TEXINPUTS.lualatex      = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.luatex        = .;$TEXMF/tex/{luatex,plain,generic,}//
+TEXINPUTS.dvilualatex   = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.dviluatex     = .;$TEXMF/tex/{luatex,plain,generic,}//
+
+% XeTeX.
+TEXINPUTS.xelatex       = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}//
+TEXINPUTS.xeplain       = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}//
+TEXINPUTS.xetex         = .;$TEXMF/tex/{xetex,plain,generic,}//
+
+% Omega / Aleph.
+TEXINPUTS.aleph         = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.elambda       = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.eomega        = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.lambda        = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.lamed         = .;$TEXMF/tex/{lamed,lambda,latex,generic,}//
+TEXINPUTS.omega         = .;$TEXMF/tex/{plain,generic,}//
+
+% p(La)TeX.
+TEXINPUTS.ptex          = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
+TEXINPUTS.platex        = .;$TEXMF/tex/{platex,ptexgeneric,latex,generic,}//
+
+% epTeX.
+TEXINPUTS.eptex         = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}//
+
+% pBibTeX bibliographies and style files.
+BIBINPUTS.pbibtex       = .;$TEXMF/{pbibtex,bibtex}/bib//
+BSTINPUTS.pbibtex       = .;$TEXMF/{pbibtex,bibtex}/bst//
+
+% ConTeXt.
+TEXINPUTS.context       = .;$TEXMF/tex/{context,plain,generic,}//
+
+% jadetex.
+TEXINPUTS.jadetex       = .;$TEXMF/tex/{jadetex,latex,generic,}//
+TEXINPUTS.pdfjadetex    = .;$TEXMF/tex/{jadetex,latex,generic,}//
+
+% XMLTeX.
+TEXINPUTS.xmltex        = .;$TEXMF/tex/{xmltex,latex,generic,}//
+TEXINPUTS.pdfxmltex     = .;$TEXMF/tex/{xmltex,latex,generic,}//
+
+% Miscellany, no longer built.
+TEXINPUTS.lamstex       = .;$TEXMF/tex/{lamstex,plain,generic,}//
+TEXINPUTS.lollipop      = .;$TEXMF/tex/{lollipop,plain,generic,}//
+TEXINPUTS.frpdflatex    = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frpdftex      = .;$TEXMF/tex/{french,plain,generic,}//
+
+% Earlier entries override later ones, so put this generic one last.
+TEXINPUTS               = .;$TEXMF/tex/{$progname,generic,}//
+
+% ttf2tfm.
+TTF2TFMINPUTS =                 .;$TEXMF/ttf2pk//
+
+% Metafont, MetaPost inputs.
+MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
+MPINPUTS = .;$TEXMF/metapost//
+
+% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
+% We want to find the engine-specific file, e.g., cont-en.fmt can
+% exist under both pdftex/ and xetex/.  But just in case some formats
+% end up without an engine directory, look directly in web2c/ too.
+% We repeat the same definition three times because of the way fmtutil
+% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
+% will not be found.
+TEXFORMATS = .;$TEXMF/web2c{/$engine,}
+MFBASES = .;$TEXMF/web2c{/$engine,}
+MPMEMS = .;$TEXMF/web2c{/$engine,}
+%
+% As of 2008, pool files don't exist any more (the strings are compiled
+% into the binaries), but just in case something expects to find these:
+TEXPOOL = .;$TEXMF/web2c
+MFPOOL = ${TEXPOOL}
+MPPOOL = ${TEXPOOL}
+
+% support the original xdvi.  Must come before the generic settings.
+PKFONTS.XDvi   = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}//
+VFFONTS.XDvi   = .;$TEXMF/%s
+PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
+TEXPICTS.XDvi  = .;$TEXMF/%q{dvips,tex}//
+
+% Device-independent font metric files.
+VFFONTS = .;$TEXMF/fonts/vf//
+TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
+
+% The $MAKETEX_MODE below means the drivers will not use a cx font when
+% the mode is ricoh.  If no mode is explicitly specified, kpse_prog_init
+% sets MAKETEX_MODE to /, so all subdirectories are searched.  See the manual.
+% The modeless part guarantees that bitmaps for PostScript fonts are found.
+PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
+
+% Similarly for the GF format, which only remains in existence because
+% Metafont outputs it (and MF isn't going to change).
+GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
+
+% A backup for PKFONTS and GFFONTS. Not used for anything.
+GLYPHFONTS = .;$TEXMF/fonts
+
+% A place to puth everything that doesn't fit the other font categories.
+MISCFONTS = .;$TEXMF/fonts/misc//
+
+% font name map files.  This isn't just fonts/map// because ConTeXt
+% wants support for having files with the same name in the different
+% subdirs.  Maybe if the programs ever get unified to accepting the same
+% map file syntax the definition can be simplified again.
+TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
+
+% BibTeX bibliographies and style files.  bibtex8 also uses these.
+BIBINPUTS = .;$TEXMF/bibtex/bib//
+BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//
+
+% MlBibTeX.
+MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
+MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
+
+% .ris and .bltxml bibliography formats.
+RISINPUTS = .;$TEXMF/bibtex/ris//
+BLTXMLINPUTS = .;$TEXMF/bibtex/bltxml//
+
+% MFT style files.
+MFTINPUTS = .;$TEXMF/mft//
+
+% PostScript headers and prologues (.pro); unfortunately, some programs
+% also use this for acessing font files (enc, type1, truetype)
+TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
+TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//
+
+% OSFONTDIR is to provide a convenient hook for allowing TeX to find
+% fonts installed on the system (outside of TeX).  An empty default
+% value would add "//" to the search paths, so we give it a dummy value.
+% OSFONTDIR = /usr/share/fonts
+
+% PostScript Type 1 outline fonts.
+T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//
+
+% PostScript AFM metric files.
+AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//
+
+% TrueType outline fonts.
+TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR//
+
+% OpenType outline fonts.
+OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR//
+
+% Type 42 outline fonts.
+T42FONTS = .;$TEXMF/fonts/type42//
+
+% Ligature definition files.
+LIGFONTS =  .;$TEXMF/fonts/lig//
+
+% Dvips' config.* files (this name should not start with `TEX'!).
+TEXCONFIG = $TEXMF/dvips//
+
+% Makeindex style (.ist) files.
+INDEXSTYLE = .;$TEXMF/makeindex//
+
+% Font encoding files (.enc).
+ENCFONTS = .;$TEXMF/fonts/enc//
+
+% CMap files.
+CMAPFONTS = .;$TEXMF/fonts/cmap//
+
+% Subfont definition files.
+SFDFONTS = .;$TEXMF/fonts/sfd//
+
+% OpenType feature files (.fea).
+FONTFEATURES=.;$TEXMF/fonts/fea//
+
+% .cid and .cidmap
+FONTCIDMAPS=.;$TEXMF/fonts/cid//
+
+% pdftex config files:
+PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
+
+% Used by DMP (ditroff-to-mpx), called by makempx -troff.
+TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps
+MPSUPPORT = .;$TEXMF/metapost/support
+
+% For xdvi to find mime.types and .mailcap, if they do not exist in
+% ~.  These are single directories, not paths.
+% (But the default mime.types, at least, may well suffice.)
+MIMELIBDIR = /etc
+MAILCAPLIBDIR = /etc
+
+% Default settings for the fontconfig library as used by the Windows
+% versions of xetex/xdvipdfmx.  On Unixish systems, fontconfig ignores
+% this.  ConTeXT MkIV (all platforms) also use these values.
+% 
+FONTCONFIG_FILE = fonts.conf
+FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf
+FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache
+
+% TeX documentation and source files, for use with texdoc and kpsewhich.
+TEXDOCS = $TEXMF/doc//
+TEXSOURCES = .;$TEXMF/source//
+
+% Web and CWeb input paths.
+WEBINPUTS = .;$TEXMF/web//
+CWEBINPUTS = .;$TEXMF/cweb//
+
+% Omega-related fonts and other files.
+OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//
+OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
+OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}//
+OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
+OTPINPUTS = .;$TEXMF/omega/otp//
+OCPINPUTS = .;$TEXMF/omega/ocp//
+
+% Some additional input variables for several programs.  If you add
+% a program that uses the `other text files' or `other binary files'
+% search formats, you'll want to add their variables here as well.
+T4HTINPUTS   = .;$TEXMF/tex4ht//
+
+%% t4ht utility, sharing files with TeX4ht
+TEX4HTFONTSET=alias,iso8859,unicode
+TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//
+
+% TeXworks editor configuration and settings
+TW_LIBPATH = $TEXMFCONFIG/texworks
+TW_INIPATH = $TW_LIBPATH
+
+% For security, do not look in . for dvipdfmx.cfg, since the D option
+% would allow command execution.
+DVIPDFMXINPUTS = $TEXMF/dvipdfmx
+
+% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
+% 
+% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in
+% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended
+% default expansion of TEXINPUTS will not happen and .lua files under
+% the /tex/ will not be found.
+% 
+% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex.
+% The default LUAINPUTS sufficess for luatex and dviluatex.
+%
+LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}//
+
+% Lua needs to look for binary lua libraries distributed with packages.
+CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
+
+% Architecture independent executables.
+TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}//
+
+% Other languages.
+JAVAINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/java//
+PERLINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/perl//
+PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
+RUBYINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/ruby//
+
+
+%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
+% KPSE_DOT = .
+
+% This definition isn't used from this .cnf file itself (that would be
+% paradoxical), but the compile-time default in paths.h is built from it.
+% The SELFAUTO* variables are set automatically from the location of
+% argv[0], in kpse_set_program_name.
+% 
+% This main texmf.cnf file is installed, for a release YYYY, in a
+% directory such as /usr/local/texlive/YYYY/texmf/web2c/texmf.cnf.
+% Since this file is subject to future updates, the TeX Live installer
+% or human administrator may also create a file
+% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
+% will take precedence over the distributed one under texmf/web2c.
+% 
+% For security reasons, it is better not to include . in this path.
+%
+TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
+
+% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
+% expansions from binaries linked against an earlier version of the
+% library, we set $progname and $engine to something non-empty:
+progname = unsetprogname
+engine = unsetengine
+
+
+%  Part 2: Options.
+
+% If this option is set to true, `tex a.b' will look first for a.b.tex
+% (within each path element), and then for a.b, i.e., we try standard
+% extensions first.  If this is false, we first look for a.b and then
+% a.b.tex, i.e., we try the name as-is first.
+%
+% Both names are always tried; the difference is the order in which they
+% are tried.  The setting applies to all searches, not just .tex.
+%
+% This setting only affects names being looked up which *already* have
+% an extension.  A name without an extension (e.g., `tex story') will
+% always have an extension added first.
+%
+% The default is true, because we already avoid adding the standard
+% extension(s) in the usual cases.  E.g., babel.sty will only look for
+% babel.sty, not babel.sty.tex, regardless of this setting.
+try_std_extension_first = t
+
+% Enable system commands via \write18{...}.  When enabled fully (set to
+% t), obviously insecure.  When enabled partially (set to p), only the
+% commands listed in shell_escape_commands are allowed.  Although this
+% is not fully secure either, it is much better, and so useful that we
+% enable it for everything but bare tex.
+shell_escape = p
+
+% No spaces in this command list.
+% 
+% The programs listed here are as safe as any we know: they either do
+% not write any output files, respect openout_any, or have hard-coded
+% restrictions similar or higher to openout_any=p.  They also have no
+% features to invoke arbitrary other programs, and no known exploitable
+% bugs.  All to the best of our knowledge.  They also have practical use
+% for being called from TeX.
+% 
+shell_escape_commands = \
+bibtex,bibtex8,\
+kpsewhich,\
+makeindex,\
+repstopdf,\
+
+% we'd like to allow:
+% dvips - but external commands can be executed, need at least -R1.
+% epspdf, ps2pdf, pstopdf - need to respect openout_any,
+%   and gs -dSAFER must be used and check for shell injection with filenames.
+% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides,
+%   without Unix convert it hardly seems worth it, and Windows convert
+%   is something completely different that destroys filesystems, so skip.
+% pygmentize - but is the filter feature insecure?
+% ps4pdf - but it calls an unrestricted latex.
+% rpdfcrop - maybe ok, but let's get experience with repstopdf first.
+% texindy,xindy - but is the module feature insecure?
+% ulqda - but requires optional SHA1.pm, so why bother.
+% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any.
+
+% plain TeX should remain unenhanced.
+shell_escape.tex = f
+shell_escape.initex = f
+
+% This is used by the Windows script wrapper for restricting searching
+% for the purportedly safe shell_escape_commands above to system
+% directories.
+TEXMF_RESTRICTED_SCRIPTS = \
+  {!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}//
+
+% Allow TeX \openin, \openout, or \input on filenames starting with `.'
+% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
+% a (any)        : any file can be opened.
+% r (restricted) : disallow opening "dotfiles".
+% p (paranoid)   : as `r' and disallow going to parent directories, and
+%                  restrict absolute paths to be under $TEXMFOUTPUT.
+openout_any = p
+openin_any = a
+
+% Write .log/.dvi/etc. files here, if the current directory is unwritable.
+%TEXMFOUTPUT = /tmp
+
+% If a dynamic file creation fails, log the command to this file, in
+% either the current directory or TEXMFOUTPUT.  Set to the
+% empty string or  0  to avoid logging.
+MISSFONT_LOG = missfont.log
+
+% Set to a colon-separated list of words specifying warnings to suppress.
+% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
+% TEX_HUSH = checksum:lostchar:readable:special
+% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
+TEX_HUSH = none
+
+% Allow TeX, and MF to parse the first line of an input file for
+% the %&format construct.
+parse_first_line = t
+
+% But don't parse the first line if invoked as "tex", since we want that
+% to remain Knuth-compatible.  The src_specials and
+% file_line_error_style settings, as well as the options -enctex,
+% -mltex, -8bit, etc., also affect this, but they are all off by default.
+parse_first_line.tex = f
+parse_first_line.initex = f
+
+% Control file:line:error style messages.
+file_line_error_style = f
+
+% Enable the mktex... scripts by default?  These must be set to 0 or 1.
+% Particular programs can and do override these settings, for example
+% dvips's -M option.  Your first chance to specify whether the scripts
+% are invoked by default is at configure time.
+%
+% These values are ignored if the script names are changed; e.g., if you
+% set DVIPSMAKEPK to `foo', what counts is the value of the environment
+% variable/config value `FOO', not the `MKTEXPK' value.
+%
+%MKTEXTEX = 0
+%MKTEXPK = 0
+%MKTEXMF = 0
+%MKTEXTFM = 0
+%MKTEXFMT = 0
+%MKOCP = 0
+%MKOFM = 0
+
+% Used by makempx to run TeX.  We use "etex" because MetaPost is
+% expecting DVI, and not "tex" because we want first line parsing.
+TEX = etex
+
+% These variables specify the external program called for the
+% interactive `e' option.  %d is replaced by the line number and %s by
+% the current filename.  The default is specified at compile-time, and
+% we let that stay in place since different platforms like different values.
+%TEXEDIT = vi +%d '%s'                    % default for Unix
+%TEXEDIT = texworks --position=+%d "%s"   % default for Windows
+%MFEDIT = ${TEXEDIT}
+%MPEDIT = ${TEXEDIT}
+
+% The default `codepage and sort order' file for BibTeX8, when none is
+% given as command line option or environment variable.
+BIBTEX_CSFILE = 88591lat.csf
+
+% This variable is specific to Windows.  It must be set to 0 or 1.  The
+% default is 0.  Setting it to 1 tells the Windows script wrappers to
+% use an already installed Perl interpreter if one is found on the
+% search path, in preference to the Perl shipped with TeX Live.  Thus,
+% it may be useful if you both (a) installed a full Perl distribution
+% for general use, and (b) need to run Perl programs from TL that use
+% additional modules we don't provide.  The TL Perl does provide all the
+% standard Perl modules.
+%
+%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
+
+
+%  Part 3: Array and other sizes for TeX (and Metafont).
+%
+% If you want to change some of these sizes only for a certain TeX
+% variant, the usual dot notation works, e.g.,
+% main_memory.hugetex = 20000000
+%
+% If a change here appears to be ignored, try redumping the format file.
+
+% Memory. Must be less than 8,000,000 total.
+%
+% main_memory is relevant only to initex, extra_mem_* only to non-ini.
+% Thus, have to redump the .fmt file after changing main_memory; to add
+% to existing fmt files, increase extra_mem_*.  (To get an idea of how
+% much, try \tracingstats=2 in your TeX source file;
+% web2c/tests/memtest.tex might also be interesting.)
+%
+% To increase space for boxes (as might be needed by, e.g., PiCTeX),
+% increase extra_mem_bot.
+%
+% For some xy-pic samples, you may need as much as 700000 words of memory.
+% For the vast majority of documents, 60000 or less will do.
+%
+main_memory = 3000000 % words of inimemory available; also applies to inimf&mp
+extra_mem_top = 0     % extra high memory for chars, tokens, etc.
+extra_mem_bot = 0     % extra low memory for boxes, glue, breakpoints, etc.
+
+% ConTeXt needs lots of memory.
+extra_mem_top.context = 2000000
+extra_mem_bot.context = 4000000
+
+% Words of font info for TeX (total size of all TFM files, approximately).
+% Must be >= 20000 and <= 147483647 (without tex.ch changes).
+font_mem_size = 3000000
+
+% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes).
+font_max = 9000
+
+% Extra space for the hash table of control sequences.
+hash_extra = 200000
+
+% Max number of characters in all strings, including all error messages,
+% help texts, font names, control sequences.  These values apply to TeX.
+pool_size = 3250000
+% Minimum pool space after TeX's own strings; must be at least
+% 25000 less than pool_size, but doesn't need to be nearly that large.
+string_vacancies = 90000
+% Maximum number of strings.
+max_strings = 500000
+% min pool space left after loading .fmt
+pool_free = 47500
+
+% Buffer size.  TeX uses the buffer to contain input lines, but macro
+% expansion works by writing material into the buffer and reparsing the
+% line.  As a consequence, certain constructs require the buffer to be
+% very large, even though most documents can be handled with a small value.
+buf_size = 200000
+
+% Hyphenation trie.  The maximum possible is 4194303 (ssup_trie_size in
+% the sources), but we don't need that much.  The value here suffices
+% for all known free hyphenation patterns to be loaded simultaneously
+% (as TeX Live does).
+%
+trie_size = 1000000
+
+hyph_size = 8191        % prime number of hyphenation exceptions, >610, <32767.
+                        % http://primes.utm.edu/curios/page.php/8191.html
+nest_size = 500         % simultaneous semantic levels (e.g., groups)
+max_in_open = 15        % simultaneous input files and error insertions, 
+                        % also applies to MetaPost
+param_size = 10000      % simultaneous macro parameters, also applies to MP
+save_size = 50000       % for saving values outside current group
+stack_size = 5000       % simultaneous input sources
+
+% These are Omega-specific.
+ocp_buf_size = 500000   % character buffers for ocp filters.
+ocp_stack_size = 10000  % stacks for ocp computations.
+ocp_list_size = 1000    % control for multiple ocps.
+
+% These work best if they are the same as the I/O buffer size, but it
+% doesn't matter much.  Must be a multiple of 8.
+dvi_buf_size = 16384 % TeX
+gf_buf_size = 16384  % MF
+
+% It's probably inadvisable to change these. At any rate, we must have:
+% 45 < error_line      < 255;
+% 30 < half_error_line < error_line - 15;
+% 60 <= max_print_line;
+% These apply to TeX, Metafont, and MetaPost.
+error_line = 79
+half_error_line = 50
+max_print_line = 79
+
+% Metafont only.
+screen_width.mf = 1664
+screen_depth.mf = 1200
+
+% BibTeX only (max_strings also determines hash_size and hash_prime).
+ent_str_size =  250
+glob_str_size = 5000
+max_strings.bibtex = 35307
+max_strings.bibtex8 = 35307
+max_strings.bibtexu = 35307
+max_strings.pbibtex = 35307
+
+% GFtype only.
+line_length.gftype = 500
+max_rows.gftype = 8191
+max_cols.gftype = 8191