uboot4extlinux-udoo: move package to [libre]

5 files changed, 0 insertions, 629 deletions

diff --git a/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch b/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch
deleted file mode 100644
index 7328d1ad7..000000000
--- a/libre-testing/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch
+++ /dev/null
@@ -1,389 +0,0 @@
-diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg
---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg	1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg	2016-02-23 18:15:32.854611743 -0300
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+
-+DATA 4, MX6_MMDC_P0_MDPDC,	0x0002002D
-+DATA 4, MX6_MMDC_P0_MDOTC,	0x00333040
-+
-+DATA 4, MX6_MMDC_P0_MDCFG0,	0x3F4352F3
-+DATA 4, MX6_MMDC_P0_MDCFG1,	0xB66D8B63
-+DATA 4, MX6_MMDC_P0_MDCFG2,	0x01FF00DB
-+
-+DATA 4, MX6_MMDC_P0_MDMISC,	0x00001740
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00008000
-+DATA 4, MX6_MMDC_P0_MDRWD,	0x000026D2
-+
-+
-+DATA 4, MX6_MMDC_P0_MDOR,	0x00431023
-+DATA 4, MX6_MMDC_P0_MDASP,	0x00000027
-+DATA 4, MX6_MMDC_P0_MDCTL,	0x831A0000
-+
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x02008032
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00008033
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00048031
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x05208030
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x04008040
-+
-+DATA 4, MX6_MMDC_P0_MPZQHWCTRL,	0xa1390003
-+DATA 4, MX6_MMDC_P1_MPZQHWCTRL,	0xa1390003
-+
-+DATA 4, MX6_MMDC_P0_MDREF,	0x00007800
-+
-+DATA 4, MX6_MMDC_P0_MPODTCTRL,	0x00022227
-+DATA 4, MX6_MMDC_P1_MPODTCTRL,	0x00022227
-+
-+DATA 4, MX6_MMDC_P0_MPDGCTRL0,	0x425C0251
-+DATA 4, MX6_MMDC_P0_MPDGCTRL1,	0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL0,	0x021B021E
-+DATA 4, MX6_MMDC_P1_MPDGCTRL1,	0x01730200
-+
-+DATA 4, MX6_MMDC_P0_MPRDDLCTL,	0x45474C45
-+DATA 4, MX6_MMDC_P1_MPRDDLCTL,	0x44464744
-+DATA 4, MX6_MMDC_P0_MPWRDLCTL,	0x3F3F3336
-+DATA 4, MX6_MMDC_P1_MPWRDLCTL,	0x32383630
-+
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL0,	0x002F0038
-+DATA 4, MX6_MMDC_P0_MPWLDECTRL1,	0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL0,	0x001F001F
-+DATA 4, MX6_MMDC_P1_MPWLDECTRL1,	0x001F001F
-+
-+DATA 4, MX6_MMDC_P0_MPMUR0,	0x00000000
-+DATA 4, MX6_MMDC_P1_MPMUR0,	0x00000000
-+
-+DATA 4, MX6_MMDC_P0_MDPDC,	0x0002556D
-+DATA 4, MX6_MMDC_P0_MAPSR,	0x00011006
-+DATA 4, MX6_MMDC_P0_MDSCR,	0x00000000
-diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg
---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg	1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg	2016-02-23 18:15:32.854611743 -0300
-@@ -0,0 +1,84 @@
-+/*
-+ * Copyright (C) 2013 Seco USA Inc
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ *
-+ * Device Configuration Data (DCD)
-+ *
-+ * Each entry must have the format:
-+ * Addr-type           Address        Value
-+ *
-+ * where:
-+ *      Addr-type register length (1,2 or 4 bytes)
-+ *      Address   absolute address of the register
-+ *      value     value to be stored in the register
-+ */
-+
-+/*
-+ * DDR3 settings
-+ * MX6Q    ddr is limited to 1066 Mhz	currently 1056 MHz(528 MHz clock),
-+ *	   memory bus width: 64 bits	x16/x32/x64
-+ * MX6DL   ddr is limited to 800 MHz(400 MHz clock)
-+ *	   memory bus width: 64 bits	x16/x32/x64
-+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock)
-+ *	   memory bus width: 32 bits	x16/x32
-+ */
-+DATA 4, MX6_IOM_DRAM_SDQS0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS1,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS2,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS3,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS4,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS5,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS6,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDQS7,	0x00000028
-+
-+DATA 4, MX6_IOM_GRP_B0DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B1DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B2DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B3DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B4DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B5DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B6DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_B7DS,	0x00000028
-+DATA 4, MX6_IOM_GRP_ADDDS,	0x00000028
-+
-+DATA 4, MX6_IOM_GRP_CTLDS,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_DQM0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM1,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM2,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM3,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM4,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM5,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM6,	0x00000028
-+DATA 4, MX6_IOM_DRAM_DQM7,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_CAS,	0x00000028
-+DATA 4, MX6_IOM_DRAM_RAS,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDCLK_1,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_RESET,	0x00000028
-+
-+DATA 4, MX6_IOM_DRAM_SDODT0,	0x00000028
-+DATA 4, MX6_IOM_DRAM_SDODT1,	0x00000028
-+
-+/* (differential input) */
-+DATA 4, MX6_IOM_DDRMODE_CTL,	0x00020000
-+/* (differential input) */
-+DATA 4, MX6_IOM_GRP_DDRMODE,	0x00020000
-+/* disable ddr pullups */
-+DATA 4, MX6_IOM_GRP_DDRPKE,	0x00000000
-+DATA 4, MX6_IOM_DRAM_SDBA2,	0x00000000
-+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
-+DATA 4, MX6_IOM_GRP_DDR_TYPE,	0x000C0000
-+
-+/* Read data DQ Byte0-3 delay */
-+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL,	0x33333333
-+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL,	0x33333333
-+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL,	0x33333333
-diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg
---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg	1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/board/udoo/udoo-dl.cfg	2016-02-23 18:15:32.854611743 -0300
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2013 Boundary Devices
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ *
-+ * Refer doc/README.imximage for more details about how-to configure
-+ * and create imximage boot image
-+ *
-+ * The syntax is taken as close as possible with the kwbimage
-+ */
-+
-+/* image version */
-+IMAGE_VERSION 2
-+
-+/*
-+ * Boot Device : one of
-+ * spi, sd (the board has no nand neither onenand)
-+ */
-+BOOT_FROM      sd
-+
-+#define __ASSEMBLY__
-+#include <config.h>
-+#include "asm/arch/mx6-ddr.h"
-+#include "asm/arch/iomux.h"
-+#include "asm/arch/crm_regs.h"
-+
-+#include "ddr-setup_dl.cfg"
-+#include "1066mhz_4x256mx16_dl.cfg"
-+#include "clocks.cfg"
-diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig
---- u-boot-2015.01.orig/configs/udoo_dl_defconfig	1969-12-31 21:00:00.000000000 -0300
-+++ u-boot-2015.01/configs/udoo_dl_defconfig	2016-02-23 18:15:32.854611743 -0300
-@@ -0,0 +1,3 @@
-+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024"
-+CONFIG_ARM=y
-+CONFIG_TARGET_UDOO=y
-diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h
---- u-boot-2015.01.orig/include/configs/udoo.h	2015-01-12 12:39:08.000000000 -0200
-+++ u-boot-2015.01/include/configs/udoo.h	2016-02-23 18:24:17.779054304 -0300
-@@ -78,7 +78,7 @@
- #define CONFIG_CMD_BMODE
- #define CONFIG_CMD_SETEXPR
- 
--#define CONFIG_BOOTDELAY		3
-+#define CONFIG_BOOTDELAY		1
- 
- #define CONFIG_SYS_MEMTEST_START	0x10000000
- #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-@@ -96,60 +96,107 @@
- #define CONFIG_BOUNCE_BUFFER
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FS_GENERIC
- #define CONFIG_DOS_PARTITION
- 
-+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
-+
-+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
-+#define CONFIG_DEFAULT_FDT_FILE		"imx6dl-udoo.dtb"
-+#elif defined(CONFIG_MX6Q)
- #define CONFIG_DEFAULT_FDT_FILE		"imx6q-udoo.dtb"
-+#endif
-+
-+/* Enable Extlinux boot support */
-+#define CONFIG_CMD_PXE
-+#define CONFIG_MENU
-+#define BOOT_TARGET_DEVICES(func)
-+#include <config_distro_bootcmd.h>
- 
- #define CONFIG_EXTRA_ENV_SETTINGS \
--	"script=boot.scr\0" \
--	"image=zImage\0" \
--	"console=ttymxc1\0" \
-+	BOOTENV \
-+	"bootfile=zImage\0" \
-+	"bootdir=/boot\0" \
-+	"console=ttymxc1,115200\0" \
- 	"splashpos=m,m\0" \
- 	"fdt_high=0xffffffff\0" \
-+	"rdaddr=0x12A00000\0" \
-+	"rdfile=initramfs-linux.img\0" \
- 	"initrd_high=0xffffffff\0" \
--	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
--	"fdt_addr=0x18000000\0" \
--	"boot_fdt=try\0" \
-+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-+	"fdtdir=/boot/dtbs\0" \
-+	"fdtaddr=0x18000000\0" \
- 	"ip_dyn=yes\0" \
-+	"optargs=\0" \
-+	"video=\0" \
-+	"devtype=mmc\0" \
-+	"devnum=0\0" \
- 	"mmcdev=0\0" \
--	"mmcpart=1\0" \
--	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
--	"update_sd_firmware_filename=u-boot.imx\0" \
--	"update_sd_firmware=" \
--		"if test ${ip_dyn} = yes; then " \
--			"setenv get_cmd dhcp; " \
-+	"mmcroot=/dev/mmcblk0p1 rw rootwait\0" \
-+	"mmcargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
-+		"root=${mmcroot} " \
-+		"video=${video}\0" \
-+	"videoargs=" \
-+		"setenv nextcon 0; " \
-+		"if hdmidet; then " \
-+			"setenv bootargs ${bootargs} " \
-+				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
-+					"if=RGB24; " \
-+			"setenv fbmem fbmem=28M; " \
-+			"setexpr nextcon ${nextcon} + 1; " \
- 		"else " \
--			"setenv get_cmd tftp; " \
-+			"echo - no HDMI monitor;" \
- 		"fi; " \
--		"if mmc dev ${mmcdev}; then "	\
--			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
--				"setexpr fw_sz ${filesize} / 0x200; " \
--				"setexpr fw_sz ${fw_sz} + 1; "	\
--				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
--			"fi; "	\
--		"fi\0" \
--	"mmcargs=setenv bootargs console=${console},${baudrate} " \
--		"root=${mmcroot}\0" \
--	"loadbootscript=" \
--		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
--	"bootscript=echo Running bootscript from mmc ...; " \
--		"source\0" \
--	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
--	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
--	"mmcboot=echo Booting from mmc ...; " \
--		"run mmcargs; " \
--		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
--			"if run loadfdt; then " \
--				"bootz ${loadaddr} - ${fdt_addr}; " \
-+		"i2c dev 1; " \
-+		"if i2c probe 0x10; then " \
-+			"setenv bootargs ${bootargs} " \
-+				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-+					"if=RGB666; " \
-+			"if test 0 -eq ${nextcon}; then " \
-+				"setenv fbmem fbmem=10M; " \
- 			"else " \
--				"if test ${boot_fdt} = try; then " \
--					"bootz; " \
--				"else " \
--					"echo WARN: Cannot load the DT; " \
--				"fi; " \
-+				"setenv fbmem ${fbmem},10M; " \
- 			"fi; " \
-+			"setexpr nextcon ${nextcon} + 1; " \
- 		"else " \
--			"bootz; " \
-+			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-+		"fi; " \
-+		"setenv bootargs ${bootargs} ${fbmem}\0" \
-+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-+	"loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
-+	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
-+	"mmcboot=mmc dev ${mmcdev}; " \
-+		"if mmc rescan; then " \
-+			"echo SD/MMC found on device ${mmcdev};" \
-+			"setenv bootpart ${mmcdev}:1; " \
-+			"echo Checking for: ${bootdir}/uEnv.txt ...;" \
-+			"if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \
-+				"load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
-+				"env import -t ${loadaddr} ${filesize};" \
-+				"echo Loaded environment from ${bootdir}/uEnv.txt;" \
-+				"echo Checking if uenvcmd is set ...;" \
-+				"if test -n ${uenvcmd}; then " \
-+					"echo Running uenvcmd ...;" \
-+					"run uenvcmd;" \
-+				"fi;" \
-+			"fi; " \
-+			"run scan_dev_for_boot;" \
-+			"if run loadimage; then " \
-+				"if run loadfdt; then " \
-+					"run mmcargs;" \
-+					"if run loadrd; then " \
-+						"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
-+					"else " \
-+						"bootz ${loadaddr} - ${fdtaddr};" \
-+					"fi;" \
-+				"else " \
-+					"echo Kernel found, but no device tree found;" \
-+				"fi;" \
-+			"else " \
-+				"echo No kernel found;" \
-+			"fi;" \
- 		"fi;\0" \
- 	"netargs=setenv bootargs console=${console},${baudrate} " \
- 		"root=/dev/nfs " \
-@@ -161,10 +208,10 @@
- 		"else " \
- 			"setenv get_cmd tftp; " \
- 		"fi; " \
--		"${get_cmd} ${image}; " \
-+		"${get_cmd} ${bootfile}; " \
- 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
--			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
--				"bootz ${loadaddr} - ${fdt_addr}; " \
-+			"if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \
-+				"bootz ${loadaddr} - ${fdtaddr}; " \
- 			"else " \
- 				"if test ${boot_fdt} = try; then " \
- 					"bootz; " \
-@@ -177,16 +224,7 @@
- 		"fi;\0"
- 
- #define CONFIG_BOOTCOMMAND \
--	   "mmc dev ${mmcdev}; if mmc rescan; then " \
--		   "if run loadbootscript; then " \
--			   "run bootscript; " \
--		   "else " \
--			   "if run loadimage; then " \
--				   "run mmcboot; " \
--			   "else run netboot; " \
--			   "fi; " \
--		   "fi; " \
--	   "else run netboot; fi"
-+	"run mmcboot;"
- 
- /* Miscellaneous configurable options */
- #define CONFIG_SYS_LONGHELP
-@@ -227,6 +265,7 @@
- 
- #define CONFIG_OF_LIBFDT
- #define CONFIG_CMD_BOOTZ
-+#define CONFIG_SUPPORT_RAW_INITRD
- 
- #ifndef CONFIG_SYS_DCACHE_OFF
- #define CONFIG_CMD_CACHE
diff --git a/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch b/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch
deleted file mode 100644
index 30718c561..000000000
--- a/libre-testing/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 5b07fc2c680ad4279a45d863108544020b4d74cd Mon Sep 17 00:00:00 2001
-From: Sasha Levin <sasha.levin@oracle.com>
-Date: Mon, 13 Oct 2014 15:51:05 -0700
-Subject: [PATCH 2/6] kernel: add support for gcc 5
-
-We're missing include/linux/compiler-gcc5.h which is required now
-because gcc branched off to v5 in trunk.
-
-Just copy the relevant bits out of include/linux/compiler-gcc4.h,
-no new code is added as of now.
-
-This fixes a build error when using gcc 5.
-
-Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-Cc: <stable@vger.kernel.org>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
- include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
- create mode 100644 include/linux/compiler-gcc5.h
-
-diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
-new file mode 100644
-index 0000000..cdd1cc2
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,66 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used				__attribute__((__used__))
-+#define __must_check			__attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+   to them will be unlikely.  This means a lot of manual unlikely()s
-+   are unnecessary now for any paths leading to the usual suspects
-+   like BUG(), printk(), panic() etc. [but let's keep them for now for
-+   older compilers]
-+
-+   Early snapshots of gcc 4.3 don't support this and we can't detect this
-+   in the preprocessor, but we can live with this because they're unreleased.
-+   Maketime probing would be overkill here.
-+
-+   gcc also has a __attribute__((__hot__)) to move hot functions into
-+   a special section, but I don't see any sense in this right now in
-+   the kernel context */
-+#define __cold			__attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable.  This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased.  Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone	__attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ * Fixed in GCC 4.8.2 and later versions.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
--- 
-2.4.4
-
diff --git a/libre-testing/uboot4extlinux-udoo/PKGBUILD b/libre-testing/uboot4extlinux-udoo/PKGBUILD
deleted file mode 100644
index 41f6960a4..000000000
--- a/libre-testing/uboot4extlinux-udoo/PKGBUILD
+++ /dev/null
@@ -1,69 +0,0 @@
-# U-Boot: UDOO
-# Maintainer: André Silva <emulatorman@parabola.nu>
-
-buildarch=4
-
-pkgbase=uboot4extlinux-udoo
-pkgname=('uboot4extlinux-udoo_dl' 'uboot4extlinux-udoo_quad')
-pkgver=2015.01
-pkgrel=1
-arch=('armv7h')
-url="http://git.denx.de/u-boot.git/"
-license=('GPL')
-makedepends=('bc')
-backup=(boot/extlinux/extlinux.conf)
-source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
-        '0001-parabola-arm-modifications.patch'
-        '0002-kernel-add-support-for-gcc-5.patch'
-        'extlinux.conf')
-md5sums=('7f08dc9e98a71652bd6968888ed6ec95'
-         'f90125a266a2cd80980464f949d03d88'
-         '721a46867e189d8dedc6b6f86a536a34'
-         'e05d2d41a1bdbbd5d6fec02534784dcd')
-
-prepare() {
-  cd u-boot-${pkgver}
-
-  patch -Np1 -i ../0001-parabola-arm-modifications.patch
-  patch -Np1 -i ../0002-kernel-add-support-for-gcc-5.patch
-}
-
-build() {
-  cd u-boot-${pkgver}
-  
-  unset CFLAGS CXXFLAGS LDFLAGS
-  
-  mkdir bins
-  for i in dl quad; do
-    make distclean
-    make udoo_${i}_config
-    make
-    mv u-boot.imx bins/u-boot-${i}.imx
-  done
-}
-
-package_uboot4extlinux-udoo_dl() {
-  pkgdesc="U-Boot with Extlinux support for UDOO Dual"
-  replaces=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec'
-            'uboot-udoo-dual' 'uboot-udoo_dl')
-  conflicts=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec'
-             'uboot-udoo-dual' 'uboot-udoo_dl' 'uboot4extlinux-udoo_quad' 'uboot4grub-udoo_dl' 'uboot4grub-udoo_quad')
-  install=${pkgbase}.install
-
-  mkdir -p "${pkgdir}"/boot/extlinux
-  cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}"/boot/u-boot.imx
-  cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
-
-package_uboot4extlinux-udoo_quad() {
-  pkgdesc="U-Boot with Extlinux support for UDOO Quad"
-  replaces=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec'
-            'uboot-udoo-quad' 'uboot-udoo_quad')
-  conflicts=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec'
-             'uboot-udoo-quad' 'uboot-udoo_quad' 'uboot4extlinux-udoo_dl'  'uboot4grub-udoo_dl' 'uboot4grub-udoo_quad')
-  install=${pkgbase}.install
-
-  mkdir -p "${pkgdir}"/boot/extlinux
-  cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}"/boot/u-boot.imx
-  cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux
-}
diff --git a/libre-testing/uboot4extlinux-udoo/extlinux.conf b/libre-testing/uboot4extlinux-udoo/extlinux.conf
deleted file mode 100644
index 45d603094..000000000
--- a/libre-testing/uboot4extlinux-udoo/extlinux.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-menu title Welcome to U-Boot with Extlinux support!
-
-label Parabola GNU/Linux-libre, linux-libre kernel
-	kernel /boot/vmlinuz-linux-libre
-	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-	fdtdir /boot/dtbs/linux-libre
-
-#label Parabola GNU/Linux-libre, linux-libre-lts kernel
-#	kernel /boot/vmlinuz-linux-libre-lts
-#	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-#	fdtdir /boot/dtbs/linux-libre-lts
-
-#label Parabola GNU/Linux-libre, linux-libre-knock kernel
-#	kernel /boot/vmlinuz-linux-libre-knock
-#	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-#	fdtdir /boot/dtbs/linux-libre-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel
-#	kernel /boot/vmlinuz-linux-libre-lts-knock
-#	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-#	fdtdir /boot/dtbs/linux-libre-lts-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec kernel
-#	kernel /boot/vmlinuz-linux-libre-grsec
-#	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-#	fdtdir /boot/dtbs/linux-libre-grsec
-
-#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel
-#	kernel /boot/vmlinuz-linux-libre-grsec-knock
-#	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-#	fdtdir /boot/dtbs/linux-libre-grsec-knock
-
-#label Parabola GNU/Linux-libre, linux-libre-audit kernel
-#	kernel /boot/vmlinuz-linux-libre-audit
-#	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-#	fdtdir /boot/dtbs/linux-libre-audit
-
-#label Parabola GNU/Linux-libre, linux-libre-pck kernel
-#	kernel /boot/vmlinuz-linux-libre-pck
-#	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-#	fdtdir /boot/dtbs/linux-libre-pck
-
-#label Parabola GNU/Linux-libre, linux-libre-rt kernel
-#	kernel /boot/vmlinuz-linux-libre-rt
-#	append root=/dev/mmcblk0p1 rw console=ttymxc1,115200
-#	fdtdir /boot/dtbs/linux-libre-rt
diff --git a/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install b/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install
deleted file mode 100644
index 8a45c3b16..000000000
--- a/libre-testing/uboot4extlinux-udoo/uboot4extlinux-udoo.install
+++ /dev/null
@@ -1,28 +0,0 @@
-extlinux_warning() {
-  echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf"
-}
-
-flash_uboot() {
-  echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
-  echo "Do you want to do this now? [y|N]"
-  read -r shouldwe
-  if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
-    dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2
-    sync
-  else
-    echo "You can do this later by running:"
-    echo "# dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2"
-  fi
-  extlinux_warning
-}
-
-## arg 1:  the new package version
-post_install() {
-  flash_uboot
-}
-
-## arg 1:  the new package version
-## arg 2:  the old package version
-post_upgrade() {
-  flash_uboot
-}