wip

8 files changed, 200 insertions, 0 deletions

diff --git a/cmd/sbc_harness/CMakeLists.txt b/cmd/sbc_harness/CMakeLists.txt
new file mode 100644
index 0000000..34f6360
--- /dev/null
+++ b/cmd/sbc_harness/CMakeLists.txt
@@ -0,0 +1,23 @@
+# cmd/sbc_harness/CMakeLists.txt - Build script for main sbc_harness.uf2 firmware file
+#
+# Copyright (C) 2024  Luke T. Shumaker <lukeshu@lukeshu.com>
+# SPDX-Licence-Identifier: AGPL-3.0-or-later
+
+add_executable(sbc_harness
+	main.c
+	usb_keyboard.c
+)
+target_include_directories(sbc_harness PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/config)
+target_link_libraries(sbc_harness
+	pico_stdlib
+	pico_unique_id
+	tinyusb_device
+	tinyusb_board
+	libusb
+)
+pico_enable_stdio_usb(sbc_harness 0)
+pico_enable_stdio_uart(sbc_harness 1)
+pico_enable_stdio_semihosting(sbc_harness 0)
+pico_enable_stdio_rtt(sbc_harness 0)
+pico_add_extra_outputs(sbc_harness) # create .map/.bin/.hex/.uf2 files in addition to .elf
+pico_set_program_url(sbc_harness "https://git.lukeshu.com/sbc-harness")
diff --git a/cmd/sbc_harness/config/config.h b/cmd/sbc_harness/config/config.h
new file mode 100644
index 0000000..0f0385b
--- /dev/null
+++ b/cmd/sbc_harness/config/config.h
@@ -0,0 +1,54 @@
+/* config.h - Compile-time configuration for sbc_harness
+ *
+ * Copyright (C) 2024  Luke T. Shumaker <lukeshu@lukeshu.com>
+ * SPDX-Licence-Identifier: AGPL-3.0-or-later
+ */
+#ifndef _CONFIG_H_
+#define _CONFIG_H_
+
+/*#include <assert.h>*/
+
+#if defined(USE_CONFIG_NETIO_POSIX) || defined(USE_CONFIG_COROUTINE) 
+#  define CONFIG_NETIO_NUM_CONNS        8
+#endif
+#ifdef USE_CONFIG_NETIO_POSIX
+#  define CONFIG_NETIO_ISLINUX          1 /* can we use Linux-kernel-specific fcntls?  */
+#  define CONFIG_NETIO_NUM_PORTS        1
+#endif
+
+#ifdef USE_CONFIG_COROUTINE
+#  define CONFIG_COROUTINE_DEFAULT_STACK_SIZE    (8*1024)
+#  define CONFIG_COROUTINE_MEASURE_STACK         1 /* bool */
+#  define CONFIG_COROUTINE_PROTECT_STACK         1 /* bool */
+#  define CONFIG_COROUTINE_DEBUG                 0 /* bool */
+#  define CONFIG_COROUTINE_NUM                   (1                          /* usb_common   */ +\
+                                                  1                          /* usb_keyboard */ +\
+                                                  CONFIG_NETIO_NUM_CONNS     /* accept+read  */ +\
+                                                  (2*CONFIG_NETIO_NUM_CONNS) /* work+write   */ )
+  /*static_assert((CONFIG_COROUTINE_NUM * CONFIG_COROUTINE_DEFAULT_STACK_SIZE) < (264 * 1024)); */
+#endif
+
+#ifdef USE_CONFIG_9P
+#  define CONFIG_9P_PORT                564
+   /**
+    * This max-msg-size is sized so that a Twrite message can return
+    * 8KiB of data.
+    *
+    * This is the same as the default in Plan 9 4e's lib9p; it has the
+    * comment that "24" is "ample room for Twrite/Rread header
+    * (iounit)".  In fact, the Twrite header is only 23 bytes
+    * ("size[4] Twrite[1] tag[2] fid[4] offset[8] count[4]") and the
+    * Rread header is even shorter at 11 bytes ("size[4] Rread[1]
+    * tag[2] count[4]"), so "24" appears to be the size of the Twrite
+    * header rounded up to a nice round number.
+    *
+    * In older versions of 9P ("9P1"), the max message size was
+    * defined as part of the protocol specification rather than
+    * negotiated.  In Plan 9 1e it was (8*1024)+128, and was bumped to
+    * (8*1024)+160 in 2e and 3e.
+    */
+#  define CONFIG_9P_MAX_MSG_SIZE        ((8*1024)+24)
+#  define CONFIG_9P_MAX_ERR_SIZE        128 /* 128 is what Plan 9 4e uses */
+#endif
+
+#endif /* _CONFIG_H */
diff --git a/cmd/sbc_harness/config/tusb_config.h b/cmd/sbc_harness/config/tusb_config.h
new file mode 100644
index 0000000..cb1ca3b
--- /dev/null
+++ b/cmd/sbc_harness/config/tusb_config.h
@@ -0,0 +1,107 @@
+/* tusb_config.h - Compile-time configuration for the TinyUSB library
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ * Copyright (c) 2024 Luke T. Shumaker <lukeshu@lukeshu.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// TinyUSB Device (TUD) initialization for rp2040-based boards
+//--------------------------------------------------------------------
+
+// Which USB port to use for the RootHub.
+// The rp2040 only has 1 port, so it's gotta be port #0.
+#define BOARD_TUD_RHPORT      0
+
+// RHPort max operational speed.
+// Use OPT_MODE_DEFAULT_SPEED for max speed supported by MCU.
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+
+//--------------------------------------------------------------------
+// Configuration: common
+//--------------------------------------------------------------------
+
+// defined by compiler flags
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
+#endif
+
+// Conditional because it might be defined with `-D` on the command
+// line if `cmake -DCMAKE_BUILD_TYPE=Debug`.
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+// Tinyusb use follows macros to declare transferring memory so that they can be put
+// into those specific section.
+// e.g
+// - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+// - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_SECTION      /* blank */
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
+
+#define CFG_TUD_ENABLED       1
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+//--------------------------------------------------------------------
+// Configuration: TinyUSB Device (TUD)
+//--------------------------------------------------------------------
+
+// control endpoint max packet size (only 8, 16, 32, or 64 are valid)
+#define CFG_TUD_ENDPOINT0_SIZE    64
+
+// Which of TinyUSB's built-in class drivers to enable.
+//
+// If a class takes an int, that's the maximum number of interfaces of
+// that type that may be listed in the same configuration descriptor.
+#define CFG_TUD_CDC               0 // int : Communications Device Class (e.g. ttyUSB) https://www.usb.org/sites/default/files/CDC1.2_WMC1.1_012011.zip
+#define CFG_TUD_MSC               0 // bool: Mass Storage Class                        https://www.usb.org/sites/default/files/Mass_Storage_Specification_Overview_v1.4_2-19-2010.pdf
+#define CFG_TUD_HID               1 // int : Human Interface Device                    https://www.usb.org/sites/default/files/hid1_11.pdf
+#define CFG_TUD_AUDIO             0 // int : Audio                                     https://www.usb.org/sites/default/files/audio10.pdf
+#define CFG_TUD_VIDEO             0 // int : Video                                     https://www.usb.org/sites/default/files/USB_Video_Class_1_5.zip
+#define CFG_TUD_MIDI              0 // int : Musical Instrument Digital Interface      https://www.usb.org/sites/default/files/USB%20MIDI%20v2_0.pdf
+#define CFG_TUD_VENDOR            0 // int : ???
+#define CFG_TUD_USBTMC            0 // bool: Test & Measurement Class                  https://www.usb.org/sites/default/files/USBTMC_1_006a.zip
+#define CFG_TUD_DFU_RUNTIME       0 // bool: Device Firmware Upgrade                   https://www.usb.org/sites/default/files/DFU_1.1.pdf
+#define CFG_TUD_DFU               0 // bool: Device Firmware Upgrade                   https://www.usb.org/sites/default/files/DFU_1.1.pdf 
+#define CFG_TUD_ECM_RNDIS         0 // bool: net
+#define CFG_TUD_NCM               0 // bool: net
+#define CFG_TUD_BTH               0 // bool: Bluetooth
+
+// HID buffer size Should be sufficient to hold ID (if any) + Data
+#define CFG_TUD_HID_EP_BUFSIZE    8
+
+//--------------------------------------------------------------------
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */
diff --git a/cmd/harness/main.c b/cmd/sbc_harness/main.c
index 1fd9f8c..1fd9f8c 100644
--- a/cmd/harness/main.c
+++ b/cmd/sbc_harness/main.c
diff --git a/cmd/harness/usb_keyboard.c b/cmd/sbc_harness/usb_keyboard.c
index 1989b35..1989b35 100644
--- a/cmd/harness/usb_keyboard.c
+++ b/cmd/sbc_harness/usb_keyboard.c
diff --git a/cmd/harness/usb_keyboard.h b/cmd/sbc_harness/usb_keyboard.h
index 6b65360..6b65360 100644
--- a/cmd/harness/usb_keyboard.h
+++ b/cmd/sbc_harness/usb_keyboard.h
diff --git a/cmd/srv9p/CMakeLists.txt b/cmd/srv9p/CMakeLists.txt
new file mode 100644
index 0000000..3db8795
--- /dev/null
+++ b/cmd/srv9p/CMakeLists.txt
@@ -0,0 +1,15 @@
+# cmd/srv9p/CMakeLists.txt - Build script for srv9p test/dev executable
+#
+# Copyright (C) 2024  Luke T. Shumaker <lukeshu@lukeshu.com>
+# SPDX-Licence-Identifier: AGPL-3.0-or-later
+
+add_executable(srv9p
+	main.c
+)
+target_include_directories(srv9p PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/config)
+target_link_libraries(srv9p
+	libcr
+	libcr_ipc
+	libnetio
+	lib9p
+)
diff --git a/cmd/srv9p/config/config.h b/cmd/srv9p/config/config.h
new file mode 120000
index 0000000..2edbd7b
--- /dev/null
+++ b/cmd/srv9p/config/config.h
@@ -0,0 +1 @@
+../../sbc_harness/config/config.h
\ No newline at end of file