summaryrefslogtreecommitdiff
path: root/db-functions
AgeCommit message (Collapse)Author
2010-11-23Rewrite sourceballs to increase performance and reliabilityPierre Schmitz
* Decrease file stats as much as possible * Create a list of all packages and meta data only once * Create a list of available source packages only once * Create a list of expected packages only once * Combine all three scripts into one to share data and code * Use as much information from the db files as possible and avoid using svn * Avoid attempting to create the same source package twice Logic works as follows: 1) create a list of all packages 2) Check for each package if we need a src package and create one 3) During this process create a list of all src packages that should be there 4) Diff both lists for the cleanup
2010-11-22Set CARCH as needed by some PKGBUILDsPierre Schmitz
PKGBUILDs expect CARCH to be set. This is needed when sourcing them directly.
2010-09-12_grep_pkginfo: use a more specific formatPierre Schmitz
2010-09-12check_pkgsvn: Don't assume the same PKGBUILD for all architecturesPierre Schmitz
2010-09-12check_pkgsvn: check if pkgname is in sync with svnPierre Schmitz
In addition to pkgver and pkgrel it is checked if pkgname is defined in the PKGBUILD.
2010-09-11Fix check_pkgreposPierre Schmitz
Don't use globing as this will match a package of the same version but another arch. We can be more specific here as there are no longer packages without $arch extension.
2010-09-11Use local config instead of guessing by hostnamePierre Schmitz
Using the hostname to decide which repos to use is not releiable and hard to test. Instead use config.local to configure these. config files for sigurd and gerolde were added which can be copied or symlinked to config.local on the specific host.
2010-09-11Fix check_repo_permissionPierre Schmitz
2010-09-05Check if package exists in any other repository on updatePierre Schmitz
This also checks if the sam package exists within the old package layout (without package pool)
2010-09-05Fix updating of same package into different repositories at aoncePierre Schmitz
See FS#20745
2010-09-02Set correct group after touching the db filePierre Schmitz
* When writing the db file ensure that it has write permission of the group which owns the parent directory. * This should make the adjust-permissions cron job obsolete.
2010-09-01Simplify repo configurationPierre Schmitz
* Repositories can now be defined in the config file for each host * added community-staging, gnome-unstable and kde-unstable * Exception is the adjust-permission cron-job; but we might want to use acls in future anyway Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2010-08-22add makepkg.conf for [multilib]Pierre Schmitz
2010-08-17Add additional checks when reading PKGBUILDsPierre Schmitz
If reading from a PKGBUILD fails stop immediatly. Also put out more usefull error messages.
2010-08-17Add [staging] repositoryPierre Schmitz
2010-08-15Lock repos before checkingPierre Schmitz
2010-08-15Use common names for reposPierre Schmitz
2010-08-14Add common function to check for correct repo and archPierre Schmitz
2010-08-14Rewrite of db-updatePierre Schmitz
* db-update now updates all repos with packages in its staging dirs * sanity checks are performed before any repo is touched * improved performance * less code; easier to maintain
2010-08-13Use common functions to print messages, warnings and errorsPierre Schmitz
These functions are copied from makepkg
2010-08-13Check permission before any actionPierre Schmitz
Added a function to check if user has permission to alter the repos and db files.
2010-08-10Use more consitent naming for package poolPierre Schmitz
There are no longer architecture-specific subdirs and the structure was switch to this: ftp └── pool ├── community └── packages packages contains all packages from core, extra and testing; this naming is in sync with the svn repo naming: svn-packages and svn-community
2010-08-08Fix typoPierre Schmitz
2010-08-08Cleanup db-functionsPierre Schmitz
* fix indention * use consistent output * set vars local
2010-08-08Move common function to db-functionsPierre Schmitz
db-functions now sets an individual $WORKDIR and implements trap functinos that remove locks on exit or error. There are new functions to lock and unlock the running script. misc-scripts/ftpdir-cleanup was renamed to ftpdir-cleanup-repo as the cron-job had the same name. Script names have to be unique when using db-functions.
2010-08-08use common workdirPierre Schmitz
2010-06-20Replace PKGPOOL_DIR by a function callPierre Schmitz
The package pool dir depends on the host; so we solve this similar to get_repos_for_host() Note: There is no "os" subdir for the package pool.
2010-04-11Fail if lock couldn't be obtained; Unlock the repos if ftpdir-cleanup failsPierre Schmitz
2010-03-13sourceballs: Make cleanup more efficientEric Bélanger
Moved all cleanup related code in sourceballs-cleanup script and moved, now common, functions in db-functions. The cleanup script is now ran after all the new sourceballs have been fetched. Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
2010-03-03Make repo locking an atomic process and added timeout argumentEric Bélanger
The repo locking function now use a lock directory instead of a lock file. This makes the lock checking and creation an atomic process. The repo_lock function will now try to obtain a lock every $LOCK_DELAY seconds until it is successful. An optional third argument can be use to give a timeout in seconds; this is intended for scripts that runs unattended. Repo locking is now used in the ftpdir-cleanup script. This should fix the problem of the ftpdir-cleanup script removing the new package instead of the old one (FS#17058). Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
2010-02-21Accept any *.pkg.tar.* package file namePierre Schmitz
With this patch packages with different compressions are accepted. It is ensured that one cannot have the same package with different compression extensions. The new functions getpkgfile{,s} are used to sanitize globed filenames. Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
2009-10-29Echo pkginfo parsing errors to stderrAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-10-26Moved chk_license to db-functions fileEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-09-13Add new get_repos_for_host() functionDan McGee
And use it. This allows us to have server-specific behavior in our scripts without further patching, and it also allows us to simplify some of our scripts a fair amount. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-13Be more careful with config file inclusionDan McGee
We can't really do the basedir magic from db-functions as it is just being sourced and is not the currently executing script. Although a bit repetitive, it is a lot safer to just include the config file everywhere. Noticed this when trying to run the latest available scripts on sigurd. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-17Remove dependence on makepkg.confAaron Griffin
Removed the need for makepkg.conf * Killed off CARCH * Added PKGEXT to the config file * Remove source_makepkg function * Source config file where makepkg.conf was needed Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-22remove support for different svn reposPierre Schmitz
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-20db-functions: minor cleanup - remove echoAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-20db-scripts: getpkgbase: return pkgbase by defaultPierre Schmitz
Check for pkgbase first. If and only if this doesn't exist, return pkgname. This fixes potential ordering issues. Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-20Minor syntactic improvements in db-updateFrancois Charette
* also added error msg for repo_lock in db-functions [Aaron: keep quotes around $WORKDIR] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-20Bugfix in db-functions for _grep_pkginfoFrancois Charette
* undefined argument $pattern changed to $2 Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-14Refactor PKGINFO reading into a functionAaron Griffin
This is just for readability and cleanup Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-14Read meta data from .PKGINFO instead of filenamePierre Schmitz
Prefer pkgbase over pkgname in getpkgbase() Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-07-14fix syntax errorPierre Schmitz
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-06-12fix redirection to stderr in get_svnpathFrancois Charette
[Aaron: Use >&2 instead of /dev/stderr, just in the offchance that /dev is missing for some reason] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-05-13use pkgext defined in makepkg.confPierre Schmitz
Signed-off-by: Pierre Schmitz <pierre@archlinux.de> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-05-12fixed redirection of error msgs in get_svnpathFrancois Charette
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-03-11Add per-repo SVN configsAaron Griffin
This could be useful if we move community to a separate SVN repo Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-02-13Correct the sourceball removal stepAaron Griffin
Only remove sourceballs that do NOT exist in any repo This code is experimental Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2009-01-09Add support for altername BASEDIRs in db-functionsAaron Griffin
This is needed because we do lots of things via relative paths, and scripts in the misc-scripts dir may need some of these functions too Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
generated by cgit v1.2.3-2-g168b (git 2.25.1) at 2024-11-20 00:10:06 +0000