From b5b05e0ec20f99cc32ba50f09e3e2ad39103980e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 4 May 2016 05:32:51 -0300 Subject: linux-libre-grsec{,-knock}-4.5.2_gnu.201604290633-1: updating version --- .../0010-stmmac-fix-MDIO-settings.patch | 235 +++++++++++++++++++++ 1 file changed, 235 insertions(+) create mode 100644 libre/linux-libre-grsec/0010-stmmac-fix-MDIO-settings.patch (limited to 'libre/linux-libre-grsec/0010-stmmac-fix-MDIO-settings.patch') diff --git a/libre/linux-libre-grsec/0010-stmmac-fix-MDIO-settings.patch b/libre/linux-libre-grsec/0010-stmmac-fix-MDIO-settings.patch new file mode 100644 index 000000000..9cdda19c7 --- /dev/null +++ b/libre/linux-libre-grsec/0010-stmmac-fix-MDIO-settings.patch @@ -0,0 +1,235 @@ +From be3687ac6bf12bd89059742faac2fb40ec8af419 Mon Sep 17 00:00:00 2001 +From: Giuseppe CAVALLARO +Date: Wed, 16 Mar 2016 10:38:49 +0100 +Subject: [PATCH 10/10] stmmac: fix MDIO settings +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Initially the phy_bus_name was added to manipulate the +driver name but it was recently just used to manage the +fixed-link and then to take some decision at run-time. +So the patch uses the is_pseudo_fixed_link and removes +the phy_bus_name variable not necessary anymore. + +The driver can manage the mdio registration by using phy-handle, +dwmac-mdio and own parameter e.g. snps,phy-addr. +This patch takes care about all these possible configurations +and fixes the mdio registration in case of there is a real +transceiver or a switch (that needs to be managed by using +fixed-link). + +Signed-off-by: Giuseppe Cavallaro +Reviewed-by: Andreas Färber +Tested-by: Frank Schäfer +Cc: Gabriel Fernandez +Cc: Dinh Nguyen +Cc: David S. Miller +Cc: Phil Reid +--- + drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +-- + drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 19 +---- + .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 84 +++++++++++++++++----- + include/linux/stmmac.h | 2 +- + 4 files changed, 71 insertions(+), 45 deletions(-) + +diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +index c21015b..389d7d0 100644 +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +@@ -271,7 +271,6 @@ static void stmmac_eee_ctrl_timer(unsigned long arg) + */ + bool stmmac_eee_init(struct stmmac_priv *priv) + { +- char *phy_bus_name = priv->plat->phy_bus_name; + unsigned long flags; + bool ret = false; + +@@ -283,7 +282,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv) + goto out; + + /* Never init EEE in case of a switch is attached */ +- if (phy_bus_name && (!strcmp(phy_bus_name, "fixed"))) ++ if (priv->phydev->is_pseudo_fixed_link) + goto out; + + /* MAC core supports the EEE feature. */ +@@ -820,12 +819,8 @@ static int stmmac_init_phy(struct net_device *dev) + phydev = of_phy_connect(dev, priv->plat->phy_node, + &stmmac_adjust_link, 0, interface); + } else { +- if (priv->plat->phy_bus_name) +- snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x", +- priv->plat->phy_bus_name, priv->plat->bus_id); +- else +- snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", +- priv->plat->bus_id); ++ snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x", ++ priv->plat->bus_id); + + snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, + priv->plat->phy_addr); +diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +index 0faf163..3f5512f 100644 +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +@@ -198,29 +198,12 @@ int stmmac_mdio_register(struct net_device *ndev) + struct mii_bus *new_bus; + struct stmmac_priv *priv = netdev_priv(ndev); + struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data; ++ struct device_node *mdio_node = priv->plat->mdio_node; + int addr, found; +- struct device_node *mdio_node = NULL; +- struct device_node *child_node = NULL; + + if (!mdio_bus_data) + return 0; + +- if (IS_ENABLED(CONFIG_OF)) { +- for_each_child_of_node(priv->device->of_node, child_node) { +- if (of_device_is_compatible(child_node, +- "snps,dwmac-mdio")) { +- mdio_node = child_node; +- break; +- } +- } +- +- if (mdio_node) { +- netdev_dbg(ndev, "FOUND MDIO subnode\n"); +- } else { +- netdev_warn(ndev, "No MDIO subnode found\n"); +- } +- } +- + new_bus = mdiobus_alloc(); + if (new_bus == NULL) + return -ENOMEM; +diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +index 6a52fa1..190fb6d 100644 +--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c ++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +@@ -96,6 +96,69 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) + } + + /** ++ * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources ++ * @plat: driver data platform structure ++ * @np: device tree node ++ * @dev: device pointer ++ * Description: ++ * The mdio bus will be allocated in case of a phy transceiver is on board; ++ * it will be NULL if the fixed-link is configured. ++ * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated ++ * in any case (for DSA, mdio must be registered even if fixed-link). ++ * The table below sums the supported configurations: ++ * ------------------------------- ++ * snps,phy-addr | Y ++ * ------------------------------- ++ * phy-handle | Y ++ * ------------------------------- ++ * fixed-link | N ++ * ------------------------------- ++ * snps,dwmac-mdio | ++ * even if | Y ++ * fixed-link | ++ * ------------------------------- ++ * ++ * It returns 0 in case of success otherwise -ENODEV. ++ */ ++static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, ++ struct device_node *np, struct device *dev) ++{ ++ bool mdio = true; ++ ++ /* If phy-handle property is passed from DT, use it as the PHY */ ++ plat->phy_node = of_parse_phandle(np, "phy-handle", 0); ++ if (plat->phy_node) ++ dev_dbg(dev, "Found phy-handle subnode\n"); ++ ++ /* If phy-handle is not specified, check if we have a fixed-phy */ ++ if (!plat->phy_node && of_phy_is_fixed_link(np)) { ++ if ((of_phy_register_fixed_link(np) < 0)) ++ return -ENODEV; ++ ++ dev_dbg(dev, "Found fixed-link subnode\n"); ++ plat->phy_node = of_node_get(np); ++ mdio = false; ++ } ++ ++ /* If snps,dwmac-mdio is passed from DT, always register the MDIO */ ++ for_each_child_of_node(np, plat->mdio_node) { ++ if (of_device_is_compatible(plat->mdio_node, "snps,dwmac-mdio")) ++ break; ++ } ++ ++ if (plat->mdio_node) { ++ dev_dbg(dev, "Found MDIO subnode\n"); ++ mdio = true; ++ } ++ ++ if (mdio) ++ plat->mdio_bus_data = ++ devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data), ++ GFP_KERNEL); ++ return 0; ++} ++ ++/** + * stmmac_probe_config_dt - parse device-tree driver parameters + * @pdev: platform_device structure + * @plat: driver data platform structure +@@ -129,30 +192,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) + /* Default to phy auto-detection */ + plat->phy_addr = -1; + +- /* If we find a phy-handle property, use it as the PHY */ +- plat->phy_node = of_parse_phandle(np, "phy-handle", 0); +- +- /* If phy-handle is not specified, check if we have a fixed-phy */ +- if (!plat->phy_node && of_phy_is_fixed_link(np)) { +- if ((of_phy_register_fixed_link(np) < 0)) +- return ERR_PTR(-ENODEV); +- +- plat->phy_node = of_node_get(np); +- } +- + /* "snps,phy-addr" is not a standard property. Mark it as deprecated + * and warn of its use. Remove this when phy node support is added. + */ + if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) + dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); + +- if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name) +- plat->mdio_bus_data = NULL; +- else +- plat->mdio_bus_data = +- devm_kzalloc(&pdev->dev, +- sizeof(struct stmmac_mdio_bus_data), +- GFP_KERNEL); ++ /* To Configure PHY by using all device-tree supported properties */ ++ if (stmmac_dt_phy(plat, np, &pdev->dev)) ++ return ERR_PTR(-ENODEV); + + of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size); + +diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h +index eead8ab..8b1ff2b 100644 +--- a/include/linux/stmmac.h ++++ b/include/linux/stmmac.h +@@ -94,12 +94,12 @@ struct stmmac_dma_cfg { + }; + + struct plat_stmmacenet_data { +- char *phy_bus_name; + int bus_id; + int phy_addr; + int interface; + struct stmmac_mdio_bus_data *mdio_bus_data; + struct device_node *phy_node; ++ struct device_node *mdio_node; + struct stmmac_dma_cfg *dma_cfg; + int clk_csr; + int has_gmac; +-- +2.7.3 + -- cgit v1.2.3-2-g168b