| Age | Commit message (Collapse) | Author |
|---|
|
Checking disk space needed for a transaction can take a while so add
an informative progress bar.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Disk space checking is likely to be an unnecessary bottleneck to
people with reasonable partition sizes so add a configuration option
to allow it to be disabled/enabled as wanted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This macro is deemed unnecessary by even the autoconf guys, so we really
don't need to use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were including the header in a lot of places it is no longer used.
Additionally, use the correct autoconf macro for determining whether
d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add pactree and sort entries.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows to very easily support non-color and linear mode, by just
setting the variables to an empty string, very much like it was done in
the bash script.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
|
|
The deps walking code simply calls print_start, print, print_end, and
all the printing logic is handled there.
The unresolvable printing is disabled for now because it does not handle
linear mode, and the linear and color output will be re-written.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
|
|
Use the bash script in contrib as the basis for a C rewrite using
libalpm. The speedup can go from dozens of seconds to less than one
second.
Colorized output is preserved.
The --graph option generates output that graphviz's `dot' utility will
understand to draw us a graph. Output is written to stdout and it is
left up to the user to pipe the data and determine the output
characteristics.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
|
|
When a -Sk or -Uk operation induced a removal of an existing local
package, --dbonly was not in effect and the files were all removed.
Fixing this behavior was already marked as TODO in database012 pactest
------------
TODO: I honestly think the above should NOT delete the original les, it
hould upgrade the DB entry without touching anything on the file stem.
E.g. this test should be the same as:
pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz
------------
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
[Dan: small coding style touchup]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Example with pacman -Uh :
$ pacman -Uh
options:
-b, --dbpath <path> set an alternate database location
-d, --nodeps skip dependency checks
-f, --force force install, overwrite conflicting files
-k, --dbonly only modify database entries, not package files
-r, --root <path> set an alternate installation root
-v, --verbose be verbose
--arch <arch> set an alternate architecture
--asdeps install packages as non-explicitly installed
--asexplicit install packages as explicitly installed
--cachedir <dir> set an alternate package cache location
--config <path> set an alternate configuration file
--debug display debug messages
--ignore <pkg> ignore a package upgrade (can be used more than once)
--ignoregroup <grp>
ignore a group upgrade (can be used more than once)
--logfile <path> set an alternate log file
--noconfirm do not ask for any confirmation
--noprogressbar do not show a progress bar when downloading files
--noscriptlet do not execute the install scriptlet if one exists
--print only print the targets instead of performing the operation
--print-format <string>
specify how the targets should be printed
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
[Dan: small coding style touchups]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The three parts (help, manpage and code) are now organized in the same
way and much easier to compare :
- specific options
- install/upgrade options for -S and -U
- transaction options for -S -R and -U
- global options
After this re-organization, it was easy to update and sync the three
components together. Duplication is also avoided.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
It's very easy to re-implement the -T feature with the more generic
alpm_find_satisfier rather then the more specific and less useful
alpm_deptest.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
One missing NULL-check and 3 dead assignments.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
And don't require pm_targets to be empty to read from stdin either.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Only occurs if no arguments were provided directly. Arguments can be
separated by any amount of valid whitespace. This allows for piping into
pacman from other programs or from itself, e.g.:
pacman -Qdtq | pacman -Rs
This is better than using xargs, as xargs will not reconnect stdin to
the terminal. The above operation performed using xargs would require
the --noconfirm flag to be passed to pacman.
Signed-off-by: Dave Reisner <d@falconindy.com>
|
|
Clean-up the previous download location of the sync database and
any old extracted sync database directories which are unneeded
with the tar-db backend.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In the following, the letters SRUDQ refer to the corresponding pacman
operations.
Most of the work in this commit is about removing as many options as
possible from the global section and moving them to where they actually
belong.
Additionally, --ignore{,group} are added to U and --dbonly is added
to S.
--dbonly added to S
--asdeps moved to S/U/D
--asexplicit moved to S/U/D
--print-format moved to S/U/R
--noprogressbar moved to S/U/R
--noscriptlet moved to S/U/R
--ignorepkg added to U
--ignoregrp added to U
-d moved to S/U/R (--nodeps) and Q (--deps)
-p moved to S/U/R (--print) and Q (--file)
-f moved to S/U
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Split parsing of CLI arguments into separate functions:
parsearg_op (operations)
parsearg_global (global options)
parsearg_{database,query,remove,sync,deptest,upgrade}
Organization strictly follows the manpage (even where the manpage is
incorrect) - these cases will be fixed in the following commits.
Switch cases are copy/pasted and statements unrelated to chosen
operation are deleted.
Parsing logic adjusted as follows:
1) Parse operation
2) If we can bail out early (duplicate op, help/version requested) do so
3) Parse arguments again:
foreach arg:
if arg is operation:
continue
tryparse_args_specific_to_op
if unsuccessful tryparse_args_global
if unsuccessful print error message and exit
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add a bunch of static declarations where possible
* Fix void functions to be proper syntax, e.g. void func(void)
* Consistency fixes (such as argv references)
* Remove dead str_cmp() function from testdb
* Remove unneeded config.h header includes
* vercmp: remove completely unnecessary string copying
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Not checking the return value of asprintf calls reuslts in a warning
when using -D_FORTIRFY_SOURCE=2. This adds a simple wrapper around
asprintf calls which checks the return value.
Currently the check does nothing more than outputing a message to stderr
on failure, but that is at least an improvement over silent failures.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These keep having to change because we are getting really good at changing
the downloaded filename. Shorten the match sequences to just .db and .pkg
and trim everything after and including these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The combination of tabs and spaces is annoying in any editor that
does not use a tab width of 2 spaces.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From the fgets manpage:
fgets() reads in at most one less than size characters from stream and
stores them into the buffer pointed to by s. Reading stops after an EOF
or a newline. If a newline is read, it is stored into the buffer. A
'\0' is stored after the last character in the buffer.
This means there is no need at all to do 'size - 1' math. Remove all of that
and just use sizeof() for simplicity on the buffer we plan on reading into.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Gettext has this whole 'Plural-Form' thing that until now we haven't taken
advantage of. Given that not all languages have the same plural form rules
as English, take advantage of it by defining a new _n() macro which will
normally define to ngettext(), and adjust a few messages as an example of
how to use.
There are surely other places where we do singular/plural logic without me
having noticed, so further patches are welcome to fix those up too.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
I'm not sure why it doesn't happen everywhere, but we need <sys/stat.h> for
umask and mkdir in this file. I hit this today:
cc1: warnings being treated as errors
util.c: In function ‘makepath’:
util.c:128:2: error: implicit declaration of function ‘umask’
util.c:141:5: error: implicit declaration of function ‘mkdir’
make[2]: *** [util.o] Error 1
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The casting of nread is safe as it is tested to be >0 when it is
initally assigned. It is also being implicitly cast in the fwrite
call in the line above.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Follow the HACKING guidelines and always use != 0 or == 0 rather
than negation within conditional statements to improve clarity.
Most of these are !strcmp usages which is the example of what not
to do in the HACKING document.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Dan: line wrapping and man page touchup.
Signed-off-by: Marc-A. Dahlhaus <mad@wol.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fix a regression of 51f9e5e40a7 that only allowed Include in repo sections.
Thanks to Marc - A. Dahlhaus for reporting the issue.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When pacman queries the ownership of an object that is not a path, it will
check in the users PATH for a match. Implements FS#8798.
Dan: did some small refactoring and error message changes when PATH is
searched and nothing is found.
Original-patch-by: Shankar <jatheendra@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had the long option wrong in some places and its behavior wasn't
documented at all with regards to -U/--upgrade.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In addition, I permuted shortopts to make it more readable.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The request of FS#12950 is implemented.
On the backend side, I introduced a new function, alpm_db_set_pkgreason(),
to modify the install reason of a package in the local database. On the
front-end side, I introduced a new main operation, -D/--database, which has
two options, --asdeps and --asexplicit. I documented this in pacman manual.
I've created two pactests to test -D: database001.py and database002.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Include the object file directly from the libalpm version comparison code as
it is the only thing we need. This drops the dependency of vercmp on
libalpm and all of the stuff we know it drags in.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Serge Ziryukin <ftrvxmtrx@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
http://mailman.archlinux.org/pipermail/pacman-dev/2010-March/010519.html
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Just as we do in -Qi, we can compute required by information for sync
database packages. The behavior seems sane; for a given package, the -Sii
required by will show all packages in *any* sync database that require it.
Implements FS#16244.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Since we were searching for '.pkg.tar.gz' before, we now have started to
show extensions during the download when we have a '.pkg.tar.xz' package.
Just look for '.pkg.tar.' (or '.db.tar.') instead and suppress anything
found from that point on.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
- remove unused variables
- some more sanity checks
- safer printf
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These were just introduced in the `--print` patch, and don't need to be
exposed outside of util.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
And a new --print-format option to configure the output.
This implements FS#14208
Example usage :
pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs
extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#17523
We always used a fixed value of 50 for textlen, which is often not enough
for download progress bar. At least we can use a bigger width on large
terminal (e.g. 60% of width) and keep 50 as minimum.
before:
nautilus-2.28.4-1-x... 5.7M 789.2K/s 00:00:07 [####################################] 100%
after:
nautilus-2.28.4-1-x86_64 5.7M 770.7K/s 00:00:08 [##############################] 100%
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
1 - Explain magic numbers
2 - There was a weird off by 1 mess in the progress bar. The code supposedly
shared the width between 50 chars for text (textlen) and the rest for the
progress bar (proglen = getcols() - textlen).
But the code actually used textlen + 1 for the text and proglen - 1 for the
progress bar (with haslen=1, the progress bar was actually empty), which was
a bit confusing so I changed it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When using --downloadonly the "Total Installed Size" message is not
needed and perhaps misleading.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
