| Age | Commit message (Collapse) | Author |
|---|
|
Our error message used to be very unclear when the configuration file
could not be found:
$ ./pactree -lsr gtk
error: failed to register sync DBs
Instead, display an accurate message and include the file name:
$ ./pactree -lsr gtk
error: config file /usr/local/etc/pacman.conf could not be read
Also, move the error message inside register_syncs() to allow for
differentiating between different errors that might require a handler in
the future.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows for specifying an alternate configuration file path, similar
to pacman's "--config" option.
Given that there is currently no other way to tell pactree to read from
another configuration file (except for patching or symlinking), this
seems totally sensible - even if there are plans to refactor and/or
replace the standalone configuration file parser.
We do not define a short option for the sake of consistency with
pacman's set of command line options.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
needed for isspace() -- avoids warnings on OSX.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There were many cases where the string coming in was a blank line, e.g.
"\n\0", length 1. The trim routine starts by trimming leading spaces,
thus trimming everything. We would then proceed to do a memmove of the
NULL byte, which is completely worthless as we can just assign it
instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These are never modified and even getopt_long's prototype shows this
modifier on the parameter.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This gives us more granularity than the former Never/Optional/Always
trifecta. The frontend still uses these values temporarily but that will
be changed in a future patch.
* Use 'siglevel' consistenly in method names, 'level' as variable name
* The level becomes an enum bitmask value for flexibility
* Signature check methods now return a array of status codes rather than
a simple integer success/failure value. This allows callers to
determine whether things such as an unknown signature are valid.
* Specific signature error codes mostly disappear in favor of the above
returned status code; pm_errno is now set only to PKG_INVALID_SIG or
DB_INVALID_SIG as appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Only one of these looked like a real red flag, in find_requiredby(), but
it doesn't hurt to fix several of them up anyway.
Unfortunately, we can't turn this on universally due to things like the
sync(), remove(), etc. builtins which we often use as variable names.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add a whole lot of bloat to parse pacman.conf and only a few lines to
use the list of sync DBs instead of the local DB.
Dan: I fully plan on this being temporary and us finding a better way in
the future to parse pacman.conf from multiple binaries. Adding a
standalone config parser is probably not the right way of going about
things, but for now it is by far the easiest.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Declare an alpm_list which, for now, only holds our local database.
walk_deps and walk_reverse_deps are refactored to account for this, and
a helper function is added to wrap alpm_db_get_pkg for traversing a
list.
This is groundwork for letting pactree walk the sync DBs.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This involves some serious changes and a very messy diff, unfortunately.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This requires a lot of line changes, but not many functional changes as
more often than not our handle variable is already available in some
fashion.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Use a few structs to hold configuration values we change given certain
options so we can be const-correct with string assignment across the
board. Behavior should be completely unchanged.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was discussed and more or less agreed upon on the mailing list. A
huge checkin, but if we just do it and let people adjust the pain will
end soon enough. Rebasing should be relatively straighforward for anyone
that sees conflicts; just be sure you use the new return style if
possible.
The following semantic patch was used to do the change, along with some
hand-massaging in order to preserve parenthesis where appropriate:
The semantic match that finds this problem is as follows, although some
hand-massaging was done in order to keep parenthesis where appropriate:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a;
@@
- return(a);
+ return a;
// </smpl>
A macros_file was also provided with the following content:
Additional steps taken, mainly for ASSERT() macros:
$ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c
$ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This avoids needless breakage of the public API.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Read the package information for sync/local databases into a pmpkghash_t
structure.
Provide a alpm_db_get_pkgcache_list() method that returns the list from
the hash object. Most usages of alpm_db_get_pkgcache are converted to
this at this stage for ease of implementation. Review whether these are
better accessing the hash table directly at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Perform the cheap struct and string setup of the local DB at handle
initialization time to match the teardown we do when releasing the handle.
If the local DB is not needed, all real initialization is done lazily after
DB paths and other things have been configured anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
None of these warn at the normal "-Wall -Werror" level, but casts do occur
that we are fine with. Make them explicit to silence some warnings when
using "-Wconversion".
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Always declare a function with (void) rather than () when we expect
no arguements. Fixes all warnings with -Wstrict-prototypes.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows to very easily support non-color and linear mode, by just
setting the variables to an empty string, very much like it was done in
the bash script.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
|
|
The deps walking code simply calls print_start, print, print_end, and
all the printing logic is handled there.
The unresolvable printing is disabled for now because it does not handle
linear mode, and the linear and color output will be re-written.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
|
|
Use the bash script in contrib as the basis for a C rewrite using
libalpm. The speedup can go from dozens of seconds to less than one
second.
Colorized output is preserved.
The --graph option generates output that graphviz's `dot' utility will
understand to draw us a graph. Output is written to stdout and it is
left up to the user to pipe the data and determine the output
characteristics.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
|
