summaryrefslogtreecommitdiff
path: root/scripts/makepkg.sh.in
AgeCommit message (Collapse)Author
2010-05-18fix for incorrect checking of return code, which causes syntax errorsDieter Plaetinck
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05makepkg: rework --skipintegAllan McRae
The current --skipinteg is a bit weird. It does not skip integrity checks, but instead does them and prints a warning. Change this behaviour to actually skipping the checks. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05makepkg -g: use checksums defined in the pkgbuildXavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Allan: amend documentation] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05makepkg: handle multiple install and changelog filesAllan McRae
The presence of all install and changelog files (multiple files may be used with package splitting) is checked for in check_sanity(). All install and changelog files are copied to the source location when using --source. The check for install and changelog file presence is removed in create_srcpackage() as this is redundant to the checks performed in check_sanity(). Moved install and changelog handling in create_srcpackage() to after source array files, as this is more logical and readily allows for the following. A check is made when creating a source package that a symlink to an install file has not already been added. This can occur if the install file is used multiple times or if it is listed in the source array. Fixes FS#18831, FS#18394 and partially fixes FS#16004 Signed-off-by: Allan McRae <allan@archlinux.org>
2010-05-05makepkg: fall back to su if sudo is not availableRay Kohler
Signed-off-by: Ray Kohler <ataraxia937@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05makepkg: improve removal of installed dependenciesAllan McRae
Compare a list of packages on the system before and after dependency resolution in order to get a complete list of packages to remove. This allows makepkg to remove packages installed due to provides. Bail in cases where packages that were on the system originally have been removed as there is a risk of breaking the system when removing the new packages. Fixes FS#15144. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-04-26makepkg: BSD find compatibility fixAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-04-26makepkg: deprecate repackaging without a package functionAllan McRae
File permissions are not guaranteed to stay the same on exit from fakeroot, so repackaging may result in files with different permissions. This is avoided when using a package() function (or split packages) as the packaging step is rerun. Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: touched up message for translation purposes] Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14Bump copyright dates to 2010Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14makepkg: always update symlinks to compressed man pagesAllan McRae
When a man page has both symbolic and hard links, any symlink pointing to other than the alphabetically first hardlink was not "compressed" and left dangling towards the uncompressed man page. Fixes FS#18569. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14makepkg: make strip options configurableCedric Staniewski
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC, that are set in makepkg.conf, specify the strip options used on binaries and shared and static libraries. In addition, files are now stripped more aggressively by default. Implements FS#13592 the way it was suggested by Allan in the comments. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14makepkg: Remove setgid bit on srcdir/pkgdir creationDan McGee
It was noted in FS#17533 that setgid bits are carried down into any created subdirectories, and thus could end up being in a built package if the original package directory was marked g+s. When we create src/ and pkg/, explicitly chmod them to remove any sticky bits. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-03-14makepkg: abort on missing or non-writable PKGDESTAllan McRae
When PKGDEST pointed to a non-writable location, makepkg would fail after completing the build process. This patch makes it abort as soon as PKGDEST is parsed. Also, move the SRCDEST check to the same point rather than right before downloading sources (which was after dependency checks). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14makepkg: only strip files that are writableAllan McRae
TODO: http://mailman.archlinux.org/pipermail/pacman-dev/2010-January/010390.html Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-02-28makepkg: update required programsAllan McRae
Remove getopt, add xz. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-01-19makepkg: Introduce $SRCPKGDESTNezmer
Introduce $SRCPKGDEST to define a destination dir for source packages instead of saving them in $PKGDEST with binary packages. The simple patch doesn't break old behavior. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-13makepkg: remove srclinks directory on error exitCedric Staniewski
When makepkg exits in create_srcpackage(), the (temporary) srclinks directory is left behind. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-13makepkg: skip devel_check() when repackagingNezmer
Currently, "makepkg -R" creates a package with a wrong updated $pkgver. Signed-off-by: Nezmer <Nezmer@allurelinux.org> [Allan: adjusted comment] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-13makepkg: limit sudo usage to allowed pacman commandsCedric Staniewski
This is particularly useful when using pacman wrappers which call sudo by themselves and therefore should not be run as root. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-13makepkg: allow to specify an alternative pacman commandCedric Staniewski
If PACMAN environment variable is set, makepkg will try to use this command to check for installed dependencies and to install or remove packages. Otherwise, makepkg will fall back to pacman. Implements FS#13028. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: move envvar section in manpage] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-13makepkg: check for references to build root in packageAllan McRae
Add a check that the package does not contain references to the folder it was built in. Fixes FS#14751 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30makepkg: allow specifying subsets of packages to buildAllan McRae
This allows makepkg to only build a specified subset of packages from a split PKGBUILD. This is very useful in combination with the -R flag or when bumping the pkgrel of a single package. Fixes FS#15956. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30makepkg: move pacman calls to a functionCedric Staniewski
Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30makepkg: Place packages symlinks in build dir when PKGDEST is usedEric Bélanger
When PKGDEST is used, symlinks to the packages will be put in the build directory. This combines the convenience of a global package cache with the ease of having a package (i.e. a symlink) in the build directory for testing and installation purpose. Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> [Allan: add comment documenting clean-up addition] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30Replace an ugly while [ with a for (( loopIsaac Good
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: Fixed logging for split packagesEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: allow the use of only a package() functionCedric Staniewski
For some packages, generally the 'any' arch ones, a build step is not required and therefore can be skipped. In these cases, a package() function without a build() one is sufficient. As a side effect, this commit makes meta packages without any function at all in the PKGBUILD possible. Fixes FS#15147. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: extend test for hyphen prefixes to pkgbase and all pkgnamesCedric Staniewski
Since commit fb97d32, which brought in this test, support for split PKGBUILDs was added, and therefore, all values of pkgname and also pkgbase have to be checked now. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: Add fallback to package functionAllan McRae
makepkg looks for a package() function when building a single package but package_$pkgname() style package functions when building a split package. This patch allows the use of a package_$pkgname() function when building a single package for consistency. This is achieved by having makepkg consider a non-split package with a package_$pkgname() function as a split package (creating just the one package). Fixes FS#16622. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: use bash test operators, part twoIsaac Good
* FS#16623, second half of makepkg * Includes stuff like -o to ||, -a to &&, etc. * if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: use bash test operators, part oneIsaac Good
* FS#16623, first half of makepkg * Includes stuff like -o to ||, -a to &&, etc. * if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com> [Dan: made commit message useful] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: Clarified error message when a sourceball exist alreadyEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: fix abortion after sourcing /etc/profileCedric Staniewski
The source command triggers / might trigger the ERR trap which makes makepkg abort right after a successful installation of missing dependencies. Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this solution. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-10Merge branch 'maint'Dan McGee
2009-11-10makepkg: quote arrays in order to preserve spaces in array itemsCedric Staniewski
Fixes FS#16871 and makes the pkgdesc workaround obsolete. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-26Merge branch 'maint'Dan McGee
2009-10-24makepkg: allow passing arguments with spacesAllan McRae
Currently makepkg takes the commandline arguments, assigns them to a variable and passes that variable to the next makepkg call (within fakeroot). Use a comination of quotes and arrays in this process to ensure any arguments passed within quotes and containing spaces stay as a single argument during the second makepkg call. Thanks to Dan for figuring out how to get this working. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24Merge branch 'maint'Dan McGee
2009-10-24makepkg: change preselected option for cleaning the cache from Y to NCedric Staniewski
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: use tput for terminal-safe colored and bold textCedric Staniewski
Suggested-by: Dan McGee <dan@archlinux.org> Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: define escape sequences globallyCedric Staniewski
In doing so, it is possible to get rid of all the tests for colored messages except for one global one. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: check for non-empty pkgbase instead of pkgnameCedric Staniewski
pkgbase is used in the following rm calls, and since pkgname can be present when pkgbase is not, it is safer to check for pkgbase. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24makepkg: remove empty .part files after a failed downloadCedric Staniewski
Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg: fix testing for built package presenceAllan McRae
Commit c7e4d10d introduced a small error in the testing of whether a package is already built. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg: allow overriding arch in split packagesAllan McRae
This allows building a mixture of binary and arch=any packages. Fixes FS#15955. The value of CARCH is no longer overridden to "any" in when arch=any is used and the assigning of the "any" arch is delayed to during the packaging stage. Adjustments were required to fix installing and checking for pre-built packages of varing arches. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg: allow overriding pkgver and pkgrel in split packagesAllan McRae
Fixing a single package within a split package requires the overriding or pkgrel. In very rare (but existing) cases, it is useful to override pkgver. Partial fix for FS#15955. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg, repo-add: replace external commands with bash substitutions where ↵Cedric Staniewski
possible This also removes the awk dependency from makepkg and repo-add. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Introduce new PKGBUILD variable `changelog`Cedric Staniewski
Currently, a changelog is added to a package if a specific file with a hardcoded name exists in the PKGBUILD's directory. This approach is not pretty and also inconsistent with the handling of install files, but it works. With the introduction of split PKGBUILDs, however, a drawback in this old behavior has arisen: you only have the possibility to include one specific changelog file in either every package defined in the PKGBUILD or in none. The use of an additional variable, `changelog`, works around this issue and makes it possible to include a changelog in only some of the packages, and besides, each package of the PKGBUILD can have its own changelog file. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-22makepkg: tidy usage outputAllan McRae
Various tidying to the usage output - change "--config <config>" to "--config <file>" to prevent wrapping in a 80 character wide terminal - re-alphabetise options, including moving all long only opts to the end - use same indentation for additional pacman options - remove useless comment Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-20Merge branch 'maint'Dan McGee
Message updates made this one a bit messy, but nothing too bad. Conflicts: lib/libalpm/add.c lib/libalpm/remove.c