summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2011-09-02Former transaction callback rename refactorDan McGee
Put all the callback stuff in alpm.h in one spot, and make the following renames for clarity with the new structure: ALPM_TRANS_EVT_* --> ALPM_EVENT_* ALPM_TRANS_CONV_* --> ALPM_QUESTION_* ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_* alpm_option_get_convcb() --> alpm_option_get_questioncb() alpm_option_set_convcb() --> alpm_option_set_questioncb() Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Move all callbacks up to the handle levelDan McGee
This was just disgusting before, unnecessary to limit these to only usage in a transaction. Still a lot of more room for cleanup but we'll start by attaching them to the handle rather than the transaction we may or may not even want to use these callbacks. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Make delta validation/application more logicalDan McGee
The call to apply was tucked inside validate, and the EVENT callbacks were done outside the function rather than inside. Reorganize things a bit to make more sense. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Clean up handling of size fieldsDan McGee
We currently have csize, isize, and size concepts, and sometimes the difference isn't clear. Ensure the following holds: * size (aka csize): always the compressed size of the package; available for everything except local packages (where it will return 0) * isize: always the installed size of the package; available for all three package types Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-01_alpm_parsedate(): return time_t and not longDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30Scale package integrity progress bar/percentage by package sizeDan McGee
This upgrades the simple 15/17 scaling by package number we used before to package sized based scaling, which is much more accurate. Addresses some of the issues raised in FS#25817. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-30Remove outdated comment for _alpm_outerconflictsAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Parse > 2GiB file sizes correctlyDan McGee
We were using atol(), which on 32 bit, cannot handle values greater than 2GiB, which is fail. Switch to a strtoull() wrapper function tailored toward parsing off_t values. This allows parsing of very large positive integer values. off_t is a signed type, but in our usages, we never parse or have a need for negative values, so the function will return -1 on error. Before: $ pacman -Si flightgear-data | grep Size Download Size : 2097152.00 K Installed Size : 2097152.00 K After: $ ./src/pacman/pacman -Si flightgear-data | grep Size Download Size : 2312592.52 KiB Installed Size : 5402896.00 KiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29lib/libalpm/handle.c: Removed redundant if conditionHelder Martins
Signed-off-by: Helder Martins <heldermartins89@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Streamline alpm_splitdep() comparisonsDan McGee
This reduces from 5 to 3 the number of searches needed on the string looking for a comparison operator, since we can so a second quick comparison looking for '=' if we find '<' or '>'. It also makes every search doable with strchr() or memchr() rather than the slower strstr() method. In testing, only 10% of splitdep calls (~1600 / 16000) during an -Ss database load found a version comparison operator, so optimizing the not found path to be require less work makes sense. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28_alpm_splitdep(): don't pass bogus length value to strndupDan McGee
If we fell through to the ALPM_DEP_MOD_ANY case, ptr would be NULL, and we would pass (0 - <str>), which is a rather large negative number or bogus positive number, depending on signed/unsigned. Just use strdup in the case where we don't have a ptr available. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Database read optimizationsDan McGee
Hard to believe there was still more room to improve on this, but I found an easily correctable oversight tonight. Our databases (both sync and local) contain many blank lines, and we were not moving onto the next line right away in these cases; instead we would proceed through our strcmp() conditional checks as normal. Some local numbers follow to show the effects of this patch: Sync `-Ss foobarbaz`: 71,709 blank lines skipped early ~1,505,889 strcmp() calls avoided (21 per line) ~15% speed improvement (.210 --> .179 sec) Local `-Qs foobarbaz`: 6,823 blank lines skipped early 115,991 strcmp() calls avoided (17 per line) ~6% speed improvement (.080 -> .071 sec) Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Allow access to package origin dataDan McGee
Add new alpm_pkg_get_origin() method, use it in the front end now that the enum constants are publicly available. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Removed multiple definitions of pkgfrom_tDiogo Sousa
libalpm now exports type alpm_pkgfrom_t in alpm.h, which may be used by frontends. Pacman now uses alpm_pkgfrom_t instead of replicating that type (pkg_from as was in src/pacman/package.h) Updated API change in README. Signed-off-by: Diogo Sousa <diogogsousa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Better error handling out of package load methodDan McGee
There are many other ways to fail a package load other than "file not found". We should also use the correct error code in this case. Clean it up a bit in the various callers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Refactor some args out of pkg_load_internalDan McGee
Just pass the entire sync package in if we have it; that way we can do any necessary operations involving it rather than have a parameter list growing endlessly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Add more info to debug key displayDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Refactor signature result return formatDan McGee
I was trying to take a shortcut and not introduce a wrapper struct for the signature results, so packed it all into alpm_sigresult_t in the first iteration. However, this is painful when one wants to add new fields or only return information regarding a single signature. Refactor the type into a few components which are exposed to the end user, and will allow a lot more future flexibility. This also exposes more information regarding the key to the frontend than was previously available. The "private" void *data pointer is used by the library to store the actual key object returned by gpgme; it is typed this way so the frontend has no expectations of what is there, and so we don't have any hard gpgme requirement in our public API. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28lib/libalpm/signing.c: Fix memory leak in decode_signature() in case of error.Diogo Sousa
Signed-off-by: Diogo Sousa <diogogsousa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28lib/libalpm/util.c: Fix two memory leaksLukas Fleischer
Free "md5sum" if md5_file() fails in alpm_compute_md5sum(). Free "sha256sum" if sha2_file() fails in alpm_compute_sha256sum(). Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Check local database status flag in db_write sanity check blockDan McGee
Do all the checks at once; this also avoids the 'return' call after we have allocated memory for "pkgpath" as well as tweaked the umask. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28be_sync.c: Fix memory leak in alpm_db_update()Lukas Fleischer
Free "syncpath" and restore umask if we fail to grab a lock. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Fix possible mismatched type with several curl argumentsDan McGee
After commit 2e7d0023150664, we use off_t rather than long variables. Use the _LARGE variants of the methods to indicate we are passing off_t sized variables, and cast using (curl_off_t) accordingly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Always process validity value returned by gpgmeDan McGee
Don't force 'never'; you should be checking both the status and validity anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Fix small memory leak in sig check codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25strtrim: don't move empty stringDan McGee
There were many cases where the string coming in was a blank line, e.g. "\n\0", length 1. The trim routine starts by trimming leading spaces, thus trimming everything. We would then proceed to do a memmove of the NULL byte, which is completely worthless as we can just assign it instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove argument from check_pgp_helperDan McGee
This one wasn't all that necessary as we only used it in one place in the function, which can be checked easily enough at the call site. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove trans is NULL check in QUESTION/EVENT/PROGRESS macrosDan McGee
trans cannot (and better not) be NULL at any point when these are being called. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Finish large file download attack preventionDan McGee
This handles the no Content-Length header problem as stated in the comments of FS#23413. We add a quick check to the callback that will force an abort if the downloaded data exceeds the payload size, and then check for this error in the post-download cleanup code. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Use off_t rather than double where possibleDan McGee
Beautiful of libcurl to use floating point types for what are never fractional values. We can do better, and we usually want these values in their integer form anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Add new 'lt' and 'zh_TW' translations from transifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Update existing translations from TransifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-24Improved alpm_list_mmerge() performance (fixed coding style)Diogo Sousa
Improved alpm_list_mmerge() performance by removing an extra pass to obtain the tail node. This was actually suggested by a TODO comment. Signed-off-by: Diogo Sousa <diogogsousa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23vercmp: ensure 2.0a and 2.0.a do not compare equalDan McGee
We had this interesting set of facts conundrum, according to vercmp return values: 2.0a < 2.0 2.0 < 2.0.a 2.0a == 2.0.a This introduces a code change that ensures '2.0a < 2.0.a' as would be expected by the first two comparisons. Unfortunately this stays us a bit further from upstream RPM code, but those are the breaks (in RPM, the versions involving 'a' do in fact compare the same, but they are both greater than the bare '2.0'). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23Style-match rpmvercmp code with upstreamDan McGee
Not sure how or why some of this differed, but it is easy enough to set it back to how it was so it is easier to diff. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23sync: halt file discovery if repo has no serversDave Reisner
This avoids error spam when no servers are configured for a repo and a sync operation is performed: Proceed with installation? [Y/n] y :: Retrieving packages from testing... warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: prevent need to copy struct in mask_signal()Dan McGee
Since we store this directly in the download function, just rework mask_signal() to take a pointer to a location to store the original. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: extract tempfile creation to its own functionDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: move (un)masking of signals to separate functionsDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: move curl option setting to static functionDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: add open_mode to payload structDave Reisner
This is a precursor to a following patch which will move the setting of options to a separate function. With the open mode as part of the struct, we can avoid modifying stack allocated variables. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: rename cd_filename to content_disp_nameDave Reisner
This is more in line with the menagerie of file name members that we now have on the payload struct. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: move tempfile and destfile to payload structDave Reisner
These are private to the download operation already, so glob them onto the struct. This is an ugly rename patch, with the only logical change being that destfile and tempfile are now freed by the payload_free function. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19Remove alpm_option_get_* usage from backendDan McGee
These are all available directly on the handle without indirection. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: remove unused macroDave Reisner
This was a vestige leftover from the libfetch days of yore. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: delete zero length downloads on curl errorDave Reisner
In the case of a non-operation (e.g. DNS resolver error), delete the leftover 0 byte .part file. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: rename payload->filename to payload->remote_nameDave Reisner
This is a far more accurate description of what this is, since it's more than likely not really a filename at all, but the name after a final slash on a URL. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: remove code duplicationDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19Rework finding a writable cache directoryDan McGee
This is a refactor and refresh of the code used to find where we should download packages. * Incorporate suggestions from FS#25435 to use TMPDIR from the environment if set, otherwise fall back to /tmp as before. * Make the writability tests a bit more in depth. We now do a three part check consisting of: - S_ISDIR(): is this even a directory - access(W_OK): is this directory writable by the current user. Unfortunately for root, this almost always returns that it is, but in the case of a RO mount or NFS share inaccessible to root, this check will exclude the directory. - mode & (any write bit): is there a writable bit set on this directory. This makes it possible to enforce a read-only cache directory by setting permissions to 0555, for example. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19Be more robust when copying package dataDan McGee
This changes the signature of _alpm_pkg_dup() to return an integer error code and provide the new package in a passed pointer argument. All callers are now more robust with checking the return value of this function to ensure a fatal error did not occur. We allow load failures to proceed as otherwise we have a chicken and egg problem- if a 'desc' local database entry is missing, the best way of restoring said file is `pacman -Sf --dbonly packagename`. This patch fixes a segfault that was occurring in this case. Fixes the segfault reported in FS#25667. Signed-off-by: Dan McGee <dan@archlinux.org>