summaryrefslogtreecommitdiff
path: root/lib/libalpm/trans.c
AgeCommit message (Collapse)Author
2010-08-27use execv to avoid using sh just to run ldconfigJonathan Conder
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23fgets invocation cleanupDan McGee
From the fgets manpage: fgets() reads in at most one less than size characters from stream and stores them into the buffer pointed to by s. Reading stops after an EOF or a newline. If a newline is read, it is stored into the buffer. A '\0' is stored after the last character in the buffer. This means there is no need at all to do 'size - 1' math. Remove all of that and just use sizeof() for simplicity on the buffer we plan on reading into. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-07Check return value of fgets callsAllan McRae
Prevents compiler warnings with -D_FORTIFY_SOURCE=2 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-21Clarify testing within conditional statementsAllan McRae
Follow the HACKING guidelines and always use != 0 or == 0 rather than negation within conditional statements to improve clarity. Most of these are !strcmp usages which is the example of what not to do in the HACKING document. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-03-14Bump copyright dates to 2010Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15Refactor do/while cycle and multiple while cyclesLaszlo Papp
* It makes the code clearer to read/understand * Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd [Dan: don't change the coding style] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-19Size handling was changed in fgets() functionsLaszlo Papp
Pacman's fgets function in the API used hardcoded numbers to identify the size. This is not good practice, so replace them with sizeof handling. Signed-off-by: Laszlo Papp <djszapi@archlinux.us> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Rework the alpm_unpack functionsXavier Chantry
Add support to extract a list of entries Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11typing: a few more fixes for special int typesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-12Change the interface for target loadingXavier Chantry
-int alpm_trans_sysupgrade(int enable_downgrade); -int alpm_trans_sync(char *target); -int alpm_trans_add(char *target); -int alpm_trans_remove(char *target); +int alpm_sync_sysupgrade(int enable_downgrade); +int alpm_sync_target(char *target); +int alpm_sync_dbtarget(char *db, char *target); +int alpm_add_target(char *target); +int alpm_remove_target(char *target); * functions renaming * add new sync_dbtarget which allows to specify the db * repo/ syntax handling is moved to frontend ( should implement FS#15141) * group handling is moved to backend ( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
2009-09-08Remove transaction typeXavier Chantry
This basically started with this change : /* Transaction */ struct __pmtrans_t { - pmtranstype_t type; pmtransflag_t flags; pmtransstate_t state; - alpm_list_t *packages; /* list of (pmpkg_t *) */ + alpm_list_t *add; /* list of (pmpkg_t *) */ + alpm_list_t *remove; /* list of (pmpkg_t *) */ And then I have to modify all the code accordingly.
2009-09-08Use sync.c for upgrade transaction prepare and commitNagy Gabor
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798. Now an upgrade transaction is just a sync transaction internally (in alpm), so all sync features are available with -U as well: * conflict resolving * sync dependencies from sync repos * remove unresolvable targets See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html for the concept. We use "mixed" target list, where PKG_FROM_FILE origin indicates local package file, PKG_FROM_CACHE indicates sync package. The front-end can add only one type of packages (depending on transaction type) atm, but if alpm resolves dependencies for -U, we may get a real mixed trans->packages list. _alpm_pkg_free_trans() was modified so that it can handle both target types _alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead _alpm_add_commit() was renamed to _alpm_upgrade_targets() sync.c (and deps.c) was modified slightly to handle mixed target lists, the modifications are straightforward. There is one notable change here: We don't create new upgrade trans in sync.c, we replace the pkgcache entries with the loaded package files in the target list (this is a bit hackish) and call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is not accessible anymore), but it doesn't hurt anything with pacman front-end, so it will be fixed later (otherwise this patch would be huge). I updated the documentation of -U and I added a new pactest, upgrade090.py, to test the syncdeps feature of -U. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Check package arch before installingXavier Chantry
This implements FS#15622 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-22Introduce -SuuNagy Gabor
If the user switches from unstable repo to a stable one, it is quite hard to sync its system with the new repo (the user will see many "Local is newer than stable" messages, nothing more). That's why I introduced -Suu, which treats a sync package like an upgrade, iff the package version doesn't match with the local one's. I added a new pactest (sync104.py) to test this, and I updated the documentation of -Su. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Dan: slight doc reword] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-16Run ldconfig inside chroot.Xavier Chantry
This fixes FS#15294. The code to run a command inside a chroot was refactored from the _alpm_runscriptlet function to _alpm_run_chroot. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-07-01Update copyright headers and messagesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-07Introduce _alpm_pkg_free_trans()Nagy Gabor
The main purpose of this function to make our code more readable. It frees transaction specific fields of pmpkg_t. (It is used when a package is removed from the target list.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-01Introduce PM_TRANS_FLAG_NOLOCKNagy Gabor
This flag indicates that the front-end will not call alpm_trans_commit(), so the database needn't be locked. This is the first step toward fixing FS#8905. If this flag is set, alpm_trans_commit() does nothing and returns with an error (that has new code: PM_ERR_TRANS_NOT_LOCKED). Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Remove pmsyncpkg_tNagy Gabor
pmsyncpkg_t data sructure was removed: 1. pmpkg_t.reason is used instead of pmsyncpkg_t.newreason. (The target packages come from sync repos, so we can use this field without any problems. Upgrade transaction also uses this field to store this info.) 2. pmsyncpkg_t.removes was moved to pmpkg_t.removes. This step requires careful programming, because we don't duplicate packages when we add them to trans->packages. So we modify sync pkgcache when we add this transaction-only info to our package. Hence it is important to free this list when we remove any package from the target list (remove_unresolvable, remove_conflicts, trans_free), otherwise this could confuse the new sync transactions (with non-pacman GUI). Overall, our code became ~100 line shorter, and we can call our helper functions directly on trans->packages in sync.c, we don't need to maintain parallel package lists. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-15Revert "popen does NOT require /bin/sh in a subchroot"Xavier Chantry
This reverts commit 9558639d8009483fbf422b138d020745986f82f1. This change was wrong, popen does require /bin/sh in a subchroot. 1) pacman -S lilo -r root Notice no error 2) rm root/bin/sh ; pacman -S lilo -r root Notice an error : error: scriptlet failed to execute correctly Actually, we already get an explicit error here, when popen is run, so there is no need to check for bin/sh explicitely. Besides this check was problematic in some cases. For example, bash itself has a scriptlet, but only post_install and post_upgrade, no pre_install and pre_upgrade. However, since bash has a scriptlet, runscriptlet will also be called before bash is installed. It won't do anything since the scriptlet has no pre_install function. But if we keep the check, we will still get "error : no /bin/sh". Conflicts: lib/libalpm/trans.c Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-15runscriptlet : Flush open fds before fork() to avoid cloning buffersXavier Chantry
This is a bug I noticed 2 years ago : http://www.nabble.com/Re%3A-logging-output-crazy-to11437357.html#a11479679 I thought I fixed it with 57d77eab32c01cd7572a11f76480a3724d09c029 But the bug was still here. Reading man fork, this part caught my attention: * The child inherits copies of the parent's set of open file descriptors. Each file descriptor in the child refers to the same open file description (see open(2)) as the corresponding file descriptor in the parent. This means that the two descriptors share open file status flags, current file offset, and signal-driven I/O attributes (see the description of F_SETOWN and F_SETSIG in fcntl(2)). Since the open file descriptors are inherited, it is probably a good idea to flush them before forking. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-31-Qu reworkNagy Gabor
From now on -Qu is an "outdated package" filter on local database. (This is a behaviour change.) This patch fixes some memleaks and makes the code cleaner, for details see my comment on FS#7884. FS#11868 is implemented. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-28Merge branch 'maint'Dan McGee
2008-10-18Correctly close the pipe used for scriptlet executionDan McGee
We never had a call to pclose() in here before, leaving our file descriptor in some sort of limbo state. In addition, clean up some of the other logic such as directly calling exit(1) on a popen() failure rather than going to our cleanup block, and handling and respecting the exit status of the subprocess correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Merge branch 'maint'Dan McGee
2008-10-12libalpm: handle syscall interruption correctlyDan McGee
It is possible to throw EINTR from a system call such as open(), close(), or waitpid() if custom signal handlers are set up and they are not initialized with the SA_RESTART flag. This was noticed by Andreas Radke when ^C (SIGINT) was given during the call to waitpid(), causing it to throw the EINTR error and we could not accommodate it. Simply wrap these calls in a simple loop that allows us to retry the call if interrupted. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-09-03Remove unnecessary initialization in new functionsDan McGee
We don't need to zero things out, we are already using calloc for this purpose. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-15_alpm_db_add_pkgincache reworkNagy Gabor
Commit 8240da6cb3ff95ad480efe3e1876104024398fae broke some alpm hierarchy and introduced a new memleak (trans->packages was never freed in case of add transaction, even if the transaction wasn't committed), so it is reverted now. We follow a different approach to reduce memory usage: _alpm_db_add_pkgincache doesn't duplicate the whole package before adding it to the cache, only the package name and version (INFRQ_BASE). This method needs very small extra memory (compared to the reverted method), and after transaction commit we use less memory than before (since the big 'files' fields are not copied to cache), this is useful in GUIs. Note: The old add_pkgincache was a bit broken, since pkg->origin wasn't filled in correctly. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Acked-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15Use access() instead of stat() when possibleDan McGee
We were using the stat() system call in quite a few places when we didn't actually need anything the stat struct returned- we were simply checking for file existence. access() will be more efficient in those cases. Before (strace pacman -Ss pacman): % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 33.16 0.005987 0 19016 stat64 After: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 34.85 0.003863 0 12633 1 access 7.95 0.000881 0 6391 7 stat64 Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-06Remove unnecessary header file, move one macro to util.cDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-17Kill PM_TRANS_TYPE_ADD.Chantry Xavier
This was totally useless. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-10Remove trans->targetsNagy Gabor
Its implementation was quite broken: * add_loadtarget() might have silently filtered out some targets when replacing an older version. * This was used in sync.c to determine whether a target is implicit or not, which is incorrect behavior. Before this patch we silently removed user confirmed replacements; now we always warn on a replacement. * remove001.py behavior was quite odd in adding same target 5 times to the target list, we can change this behavior to be a failure. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xav: changed remove001 pactest accordingly] Signed-off-by: Chantry Xavier <shiningxc@gmail.com> [Dan: rewrote commit message] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-23libalpm/cache.c : don't duplicate packages in pkgcache.Chantry Xavier
Edit _alpm_db_add_pkgincache to not duplicate packages, because this is not needed, is slower, and uses more memory. This made the max memory usage during base reinstall go from 10.4MB to 9.7MB. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-13FS#9183 : force correct permissions on tmp/.Jaroslaw Swierczynski
[Xav: removed unneeded makepath_internal function, and fixed the permission value : 1777 -> 01777] Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-28Allow NULL parameter in alpm_trans_commitAllan McRae
Fixes FS#7380: alpm crashes on passing NULL to alpm_trans_commit in a sync operation. Adds check that data parameter is not NULL in several functions. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> [Dan: fix whitespace] Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-10popen does NOT require /bin/sh in a subchrootAaron Griffin
I appears that when chrooted, the /bin/sh used by popen is that of the parent process. This is true until the process forks once chrooted, which we do not want to do. As such, this actually makes things nicer. We don't need a /bin/sh in a chroot to run install scriptlets, and don't need to check for it in the root directory Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-10Correct scriptlet usage patternAaron Griffin
The new pattern is as follows: . /path/to/scriptlet post_upgrade X Y This requires less frameworking in the install scripts (the three lines that shift and eval a function are nasty) Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-10Update GNU GPL boilerplate and copyright datesDan McGee
Update the GPL boilerplate to direct people to the GNU website for a copy of the license, as well as bump all of Judd's copyrights to 2007. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Fix a memleak in _alpm_sync_free.Chantry Xavier
An alpm_list_free call was missing. Also make use of alpm_list_free_inner in both _alpm_sync_free and _alpm_trans_free. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-21Remove duplicated get_upgrades function, use sysupgrade instead.Chantry Xavier
The alpm_get_upgrades was exactly the same as find_replacements + _alpm_sync_sysupgrade, except that it automatically made the eventual replacements, without asking the user : Replace %s with %s/%s? [Y/n] The replace question, asked in find_replacements. can now be skipped by using a NULL trans argument, so that we get the same behavior as with alpm_get_upgrades. So alpm_db_get_upgrades() can now be replaced by alpm_sync_sysupgrade(db_local, syncdbs). Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-18Fix sh and scriptlet interactionDan McGee
dash doesn't pass positional parameters to sourced scripts, causing install scripts to fail. Instead of sourcing the script, make it executable and call it directly which allows positional parameters to be passed correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-18POSIX shell does not specify meaning of source operationDan McGee
Just use '.' operator instead. Oops. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-17Remove provide.c and provide.h .Chantry Xavier
This file only contained one private function : _alpm_db_whatprovides . And the public alpm_db_whatprovides was in db.c , so I moved everything there. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> [Dan: updated POTFILES.in as well] Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-17Fix memleak in _alpm_trans_free with package listsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-16War on whitespaceDan McGee
Run the kernel's cleanfile script on all of our source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-14Remove REQUIREDBY usage from libalpmDan McGee
Instead of using the often-busted REQUIREDBY entries in the pacman database, compute them each time they are required. This should help many things: 1. Simplify the codebase 2. Prevent future database corruption 3. Ensure when we do use requiredby, it is always correct 4. Shrink the pmpkg_t memory overhead Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-04Remove the newline automatically added by alpm_logaction.Chantry Xavier
This way, _alpm_logaction behaves like _alpm_log, and gives more control. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-11-04Readd scriptlet logging that got lost in an earlier commitDan McGee
I broke scriptlet logging with ad691001e20272b794d2ed574b556f520e3555c0. Readd more or less what was there before, although it still needs a lot of work including hopefully rewriting it to a new event subsystem and having it log to a seperate file. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-29libalpm: introduce MALLOC and CALLOC macrosDan McGee
These macros take the place of the common 4 or 5 line blocks of code we had in most places that called malloc or calloc. This should reduce some code duplication and make memory allocation more standard in libalpm. Highlights: * Note that the MALLOC macro actually uses calloc, this is just for safety so that memory is initialized to 0. This can be easily changed in one place. * One malloc call was completely eliminated- it made more sense to do it on the stack. * The use of RET_ERR in public functions (mainly the alpm_*_new functions) was standardized, this makes sense so pm_errno is set. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-14libalpm/trans.c : fix a recently introduced breakage in scriptlets handling.Chantry Xavier
Commit 4853a4aad97fe36f9237ffb7356201adab507a1c used the tmpdir variable for checking the existence of /bin/sh, without resetting it. This caused /bin/sh to be deleted during the cleanup part, as soon as a scriptlet other than pre_upgrade or pre_install was executed. For example, on the first post_upgrade during a -Su. I introduced two variables : clean_tmpdir and restore_cwd, for deciding what should be done in the cleanup part. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>