summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-20signing: add a process and retry loop for database signaturesDan McGee
In reality, there is no retrying that happens as of now because we don't have any import or changing of the keyring going on, but the code is set up so we can drop this in our new _alpm_process_siglist() function. Wire up the basics to the sync database validation code, so we see something like the following: $ pacman -Ss unknowntrust error: core: signature from "Dan McGee <dpmcgee@gmail.com>" is unknown trust error: core: signature from "Dan McGee <dpmcgee@gmail.com>" is unknown trust error: database 'core' is not valid (invalid or corrupted database (PGP signature)) $ pacman -Ss missingsig error: core: missing required signature error: core: missing required signature error: database 'core' is not valid (invalid or corrupted database (PGP signature)) Yes, there is some double output, but this should be fixable in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Allow our PGP helper method to pass back the signature resultsDan McGee
This will make its way up the call chain eventually to allow trusting and importing of keys as necessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Split package validation and load loopsDan McGee
This adds a some new callback event and progress codes for package loading, which was formerly bundled in with package validation before. The main sync.c loop where loading occurred is now two loops running sequentially. The behavior should not change with this patch outside of progress and event display; more changes will come in following patches. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Extract an _alpm_pkg_validate_internal() methodDan McGee
_alpm_pkg_load_internal() was becoming a monster. Extract the top bit of the method that dealt with checksum and signature validation into a separate method that should be called before one loads a package to ensure it is valid. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20pacman/upgrade: print 'loading packages...' only onceDave Reisner
Do this outside the loop to prevent the message from being displayed (and pluralized!) for each individual package. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20pacman: use dynamic string allocation where it makes senseDan McGee
None of these are hot-code paths, and at least the target reading has little need for an arbitrary length limitation (however crazy it might be to have longer arguments). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20utils/cleanupdelta: remove unneeded syncdbpathDan McGee
This variable was totally unused. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Remove all usages of alpm_list_getdata() from the libraryDan McGee
No need for the indirection; just access ->data instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20_alpm_runscriptlet(): remove clean_tmpdir variableDan McGee
This is always true at the end since we return early if we couldn't create the tmpdir, so it is totally unnecessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Access db->pkgcache directly in db_free_pkgcache()Dan McGee
We shouldn't be going through the accessor that does a bunch of unnecessary legwork, including potentially loading the pkgcache right before we free it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Flip getcwd()/chdir() for open()/fchdir() in the frontendDan McGee
Just like we did in libalpm in commit 288a81d8470b1. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-19Use more efficient way of restoring working directoryDan McGee
Rather than using a string-based path, we can restore the working directory via a file descriptor and use of fchdir(). From the getcwd manpage: Opening the current directory (".") and calling fchdir(2) to return is usually a faster and more reliable alternative when sufficiently many file descriptors are available. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-19Reduce path allocation on the stack in local databaseDan McGee
We did a lot of both malloc-ing and stack printing to form some paths in this code. Attempt to unify it all into the one get_pkgpath() method by adding an optional third "filename" parameter, and form the necessary path string all in one go. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-19Be smarter about running ldconfig during removal transactionsDan McGee
1. Don't run it if something failed in package removal- this mirrors what we already do in sync transactions. 2. Don't run it if we are invoking it for the replaces removal bit of a sync transaction- it doesn't make sense to run ldconfig halfway through a sync install; we should only run it once at the end. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-19Search for non-prefixed paths in skip_remove listDan McGee
We add them to this list with the root path not appended; we should be searching for them this way as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18be_local: cope with a desc file without trailing newlineDan McGee
We checked the (fgets == NULL and !feof) case, but never actually bailed out of the loop if we were at the end of the file, causing infinite looping. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18Remove const specifier from changelog_read() void parameterDan McGee
This shouldn't really be declared with const, and causes a compile error when -Wcast-qual is used. Remove the const specifier from the function specification and all implementations. Also fix one other trivial -Wcast-qual warning in _alpm_db_cmp(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18Remove dead changelog_feof() codeDan McGee
We never ended up using or really needing this; kill it for now knowing it is in git history if ever needed again. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18Add a random pactestDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18src/util: provide strndup definitions where neededDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18dload: avoid using memrchrDave Reisner
This function doesn't exist on OSX. Since there aren't any other candidates in alpm for which this function would make sense to use, simply replace the function call with a loop that does the equivalent. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-18Ensure entire struct is zeroed in _alpm_parsedate()Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-18pactree: include missing ctype.h headerDave Reisner
needed for isspace() -- avoids warnings on OSX. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18configure: Fix quoting in SEDINPLACE on DarwinDave Reisner
single quotes expanded to nothing, leaving us with a command that assumed the sed expression was the backup suffix. Use a pair of escaped double quotes, which survives automake and ends up properly in makepkg. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18dload: remove user:pass@ definition from hostnameDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-18paccache: remove unnecessary if checkDave Reisner
This is superfluous as the ensuing for loop will exit immediately on the same condition avoided by the if. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-18Fix build without gpgmeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14pacman: add short opt '-p' for --print to -{S,R}hDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14include ldconfig.stub in EXTRA_DISTDave Reisner
Since c51b9ca, ldconfig.stub is required by pactest so we need to include it as part of the dist tarball. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14buildsys: remove existing symlinks before installingDave Reisner
This fixes build errors when performing a manual install straight to a filesystem where the files already exist. Reported-by: Sergej Pupykin <ml@sergej.pp.ru> Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14Don't duplicate header stringsDan McGee
There is no need to print them into buffers; we can use the values returned by gettext() directly without issue. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14makepkg: fix recreation of hardlinks to .gz manpagesDave Reisner
4ed12ae tightened up the logic to use only find, but ignored the fact that since the manpage hard link names were no longer captured. They were created as separate compressed manpages, rather than as hardlinks. This also introduces a minor efficiency of deleting all hardlinks at once and using proper iteration over an array rather than a string. Note to anyone else touching this code: e2fsprogs and libpcap are useful for testing this. If that changes in the future, you can use the below bash to locate others: IFS=$'\n' read -rd '' -a a < <(find /usr/share/man -type f \! -links 1) pacman -Qqo "${a[@]}" | sort -u I broke it! Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-14makepkg: add missing newline on passing gpg sourcecheckDave Reisner
When a sourceball passes this check without any warnings, a newline is omitted. Similar to the if clause of this else block, print a single new line at the end of the clause instead of accounting for each output. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-12makepkg: check for var existance before file existanceDave Reisner
This prevents makepkg from aborting with 'file not found' when changelog= or install= are declared in a PKGBUILD, but empty. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-11account for partial delta files in download sizeDave Reisner
Similar to an earlier commit which accounts for .part files for full packages, calculate the download_size for deltas keeping mind the possibility of a partial transfer. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-11make compute_download_size consider .part filesDave Reisner
Check for the existance of a partial download of a package file before jumping to delta calculations. Currently, if there were 10MiB remaining in a 100MiB the values passed to the front end do not reflect this. Refactored from an old patch originally by Dan. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-11dload: provide optional netrc supportDave Reisner
if ~/.netrc exists and has credentials for the hostname requested in a download, they will be provided in an http auth request. This can still be overridden by explcitly declaring user:pass in the URL. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-11makepkg: unset errexit when sourcing /etc/profileDave Reisner
This is a fix for a bash3 specific bug, where a file sourced by /etc/profile would exit non-zero and make its way back up to makepkg, forcing it to exit after package installation. Along with unsetting the ERR handler, temporarily unset errexit to avoid this. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-11paccache: escape . in trimming of diskspace stringDave Reisner
Before: ==> finished dry run: 2 candidates (diskspace saved: 7. MiB) After: ==> finished dry run: 2 candidates (diskspace saved: 7.8 MiB) Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-11download callback: show decimal places in rate if we have roomDan McGee
Display now looks like this, whereas before we would have just showed '2M/s' for the extra repository download. The cutoff is placed at 100.0 to ensure we only use 4 character slots of width (e.g. '99.9', '100'). :: Synchronizing package databases... testing 39.9 KiB 470K/s 00:00 [######################] 100% core 51.4 KiB 469K/s 00:00 [######################] 100% extra 768.8 KiB 2.1M/s 00:00 [######################] 100% community-testing 1941.0 B 54.4M/s 00:00 [######################] 100% multilib 26.6 KiB 458K/s 00:00 [######################] 100% community 449.8 KiB 1649K/s 00:00 [######################] 100% Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-11Move download callback static vars into functionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-08diskspace: fix memory leak on root mount not foundDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-08Print 'loading packages' message on -U operationsDan McGee
This will be the first thing printed when doing an upgrade. Currently there is no output at all until we start resolving dependencies, which can be a while in if specifying very large targets on the command line, in which case it is nice to let the user know we are doing something. Addresses FS#25822 in the most KISS way possible. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-07makepkg: use more awk'ish syntax in sanity checksDave Reisner
This simplifies the flow a bit, making the pipeline a little easier to grok. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-07makepkg: avoid for loop in deleting manpage hardlinksDave Reisner
find can do this all on its own and remain portable. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-07makepkg: act on function return value, not outputDave Reisner
Correcting a typo, as this function will never output anything. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-07makepkg: refactor check_pgpsigs outputDave Reisner
- display associated warnings on same line as pass/fail msg, to be more consistent with checksum verification output - properly error on a revoked key (matching pacman's behavior) Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-07Use more correct integer types in diskspace checksDan McGee
This adjusts type usage to match POSIX provided types from <sys/types.h> rather than assuming everything will fit in a long or unsigned long. Use fsblkcnt_t (unsigned) and blkcnt_t (signed) as appropriate. These are affected the same way off_t is on 32 bit platforms, where the types are extende to 64 bits if large file support is enabled. Because most numbers here are block counts, this isn't near as pressing as using a 32-bit variable for file sizes where anything over 2GiB can burn you; we likely can support files at least 512 but mainly 4096 times larger. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-07query check: use provided filelist count instead of keeping trackDan McGee
We don't need to keep track of how many files are in a package now that said value is provided to us. It also makes more sense to use size_t here for types rather than the (hopefully never too short) int. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-07Remove unnecessary castDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-2-g168b (git 2.25.1) at 2024-11-20 10:14:08 +0000