summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-01libalpm/util: don't use sprintf to convert from bin to hexDan McGee
This is a trivial operation that doesn't require calling a function over and over- just do some math and indexing into a character array. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Fix size reported in CALLOC allocation failure messageDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Convert package and database archive reads to use file descriptorsDan McGee
This gives us a bit more control and over the archive reading process, and a bit less is done behind the scenes. It also allows us to use fstat() in preference to stat(), which should avoid some potential race conditions. Some reorganization is necessary to move the stat calls after the open() calls. Error handling and cleanup in general is also improved, as we had several potential memory and file handle leaks before in some error paths. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01libalpm/util: use low-level I/O for copyfile and checksum routinesDan McGee
This removes an unnecessary level of buffering. We are not doing line-based I/O here, so we can read in blocks of 8K at a time directly from the file. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Add OPEN() and CLOSE() util macrosDan McGee
These wrap the normal open() and close() low-level I/O calls and ensure EINTR is handled correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Merge branch 'maint'Dan McGee
2011-11-01src/util: link vercmp against .lo, not the .oDave Reisner
This seems to fix FS#26652. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27dload: remove redundant conditionalDave Reisner
Replacing the strdup when after the first NULL check assures that we get continue with payload->remote_name defined. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-27dload: chmod tempfiles to respect umaskDave Reisner
Dan: fix mask calculation, add it to the success/fail block instead. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Introduce ALPM_BUFFER_SIZE constantDan McGee
This takes the place of three previously used constants: ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE. In libarchive 3.0, the first constant will be no more, so we can ensure we are forward-compatible by removing our usage of it now. The rest are unified for consistency. By default, we will use the value of BUFSIZ provided by <stdio.h>, which is 8192 on Linux. If that is undefined, a default value is provided. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26paccache: add vim modelineDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-26paccache: ensure seen/seenarch vars are setDave Reisner
Doesn't do a whole lot of good to compare against values that are never set. Fixes bug where -vvv output wasn't grouping packages together properly. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-26Fix issues with replacing unowned symlinksDan McGee
There aretwo seperate issues in the same block of file conflict checking code here: 1) If realpath errored, such as when a symlink was broken, we would call 'continue' rather than simply exit this particular method of resolution. This was likely just a copy-paste mistake as the previous resolving steps all use loops where continue makes sense. Refactor the check so we only proceed if realpath is successful, and continue with the rest of the checks either way. 2) The real problem this code was trying to solve was canonicalizing path component (e.g., directory) symlinks. The final component, if not a directory, should not be handled at all in this loop. Add a !S_ISLNK() condition to the loop so we only call this for real files. There are few other small cleanups to the debug messages that I made while debugging this problem- we don't need to keep printing the file name, and ensure every block that sets resolved_conflict to true prints a debug message so we know how it was resolved. This fixes the expected failures from symlink010.py and symlink011.py, while still ensuring the fix for fileconflict007.py works. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Add some unowned symlink replacement testsDan McGee
These should all prevent installation, and yet two of the three tests currently fail. Not good. The best way to see what is going on here is to diff the three new tests side by side- there is only a small difference between the three tests, and that is in the destination of the symlink in question that should never be overwritten. symlink010.py: myprogsuffix -> myprog symlink011.py: myprogsuffix -> broken symlink012.py: myprogsuffix -> otherprog Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Don't realloc a 0-length files array when loading packagesDan McGee
There is some pecular behavior going on here when a package is loaded that has no files, as is very common in our test suite. When we enter the realloc/sort code, a package without files will call the following: files = realloc(NULL, 0); One would assume this is a no-op, returning a NULL pointer, but that is not the case and valgrind later reports we are leaking memory. Fix the whole thing by skipping the reallocation and sort steps if the pointer is NULL, as we have nothing to do. Note that the package still gets marked as 'files loaded', becuase although there were none, we tried and were successful. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26libalpm/util: two stat() related cleanupsDan McGee
First, use fstat() in preference to stat() since we already have an open file handle. This also removes the need to check for a symlink as that is not possible when a file is opened. Next, use archive_entry_mode() rather than archive_entry_stat() as we only use the mode portion of the stat struct and the call is much cheaper. Also delay it until it is necessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Merge branch 'maint'Dan McGee
2011-10-25lib/sync: inform callers of compute_download_size of a partialDave Reisner
Extend the return values of compute_download_size to allow callers to know that a .part file exists for the package. This extra value isn't currently used, but it'll be needed later on. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Fix libtool detection of --as-needed flagAllan McRae
The fix for -Wl,--as-needed in commit b0f9477f assumes that --as-needed/--no-as-needed is the only option given in a -Wl line. However, it is perfectly valid to specify multiple flags comma separated after a single -Wl (e.g. the default LDFLAGS in Arch Linux makepkg.conf). Adjust the fix so it detect --as-needed in a more general context > readelf -d lib/libalpm/.libs/libalpm.so.?.?.? | grep NEEDED | wc -l Before: 13 After: 5 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Update libtool filesAllan McRae
Update for libtool-2.4.2 while keeping the fix for --as-needed from commit b0f9477f. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-24Add more logging to download codeDan McGee
This adds a logger to the CURLE_OK case so we can always know the return code if it was >= 400, and debug log it regardless. Also adjust another logger to use the cURL error message directly, as well as use fstat() when we have an open file handle rather than stat(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Merge branch 'maint'Dan McGee
Conflicts: src/pacman/package.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Hide empty columns in table package list displayDan McGee
On -R operations, the "New Version" column is always empty, taking up space and not really showing the user anything valuable. The same is true on -S or -U operations for the "Old Version" column when packages are only being installed and not upgraded. Remove this column so we get a few screen columns back, especially now that we show repo/packagename style output. This also makes some adjustment to the padding logic. We no longer include padding in column widths but it is included in the total table width. We also ensure the last displayed column is always right aligned, even if this is not the actual rightmost column. Example output, before: $ sudo pacman -R eclipse checking dependencies... Targets (1): Name Old Version New Version Net Change eclipse 3.7-1 -194.02 MiB Total Removed Size: 194.02 MiB And after: $ sudo pacman -R eclipse checking dependencies... Targets (1): Name Old Version Net Change eclipse 3.7-1 -194.02 MiB Total Removed Size: 194.02 MiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21pacman: show repo name in download promptDave Reisner
This only applies to the VerbosePkgLists option. Lessens the deficiencies created by earlier work to separate download records by repository. Satisfies FS#26334. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21sync: move file download loop out of download_filesDave Reisner
Create a new static function called 'download_single_file' which iterates over the servers for each payload. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21sync: check for necessary disk space for downloadDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-21sync: extract build_payload() method from find_dl_candidatesDan McGee
This is done by both the delta and regular file code, so we can extract a little helper method. Done mostly to satisfy my "why are we repeating code here" itch. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21bacman: pkgrel does not have to be an integerlolilolicon
pkgrel, as with pkgver, simply mustn't contain hyphens. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21sync: dont group sync records by repositoryDave Reisner
Break out the logic of finding payloads into a separate static function to avoid nesting mayhem. After gathering all the records, download them all at once. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove remaining usages of fprintf() from frontendDan McGee
These can either be replaced with pm_printf() if they are error related, or in the fprintf(stdout, ...) case a bare printf() will do. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove pm_fprintf() in favor of pm_printf()Dan McGee
Now that pm_printf() always prints to stderr, we don't need this second function that was always used with stderr as the first argument. Thus, this patch removes the function and makes the following sed replacement: sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Use stderr as output stream for pm_printf()Dan McGee
This matches what we now do in our backend callback function- all debug/info/warning/error/etc. messages should be on stderr. These are all the messages with a "warning:" or other type prefix, so does not affect general pacman output. This should fix the output confusion noted in FS#26555. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17base64: don't compile base64_encode() functionDan McGee
We don't use this anywhere; "comment" it out so we still remain relatively close to the upstream sources. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17pacman-key: add a default keyserver timeout value on --initDan McGee
The default is supposidely 30 seconds from the gpg manpage, but that sure wasn't what I was seeing- it was somewhere closer to two minutes of silence. Add a more reasonable 10 second timeout value which should be good enough for any keyserver that doesn't totally stink at it's job. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Show an error message on failed remote key lookupDan McGee
The absolutely terrible part about this is the failure on GPGME's part to distinguish between "key not found" and "keyserver timeout". Instead, it returns the same silly GPG_ERR_EOF in both cases (why isn't GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart. Spit out a generic enough error message that covers both cases; unfortunately we can't provide much guidance to the user because we aren't sure what actually happened. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17dload: add pointer to server list for each payloadDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17diskspace: create static function mount_point_list_freeDave Reisner
This logic is reused in both diskspace and downloadspace check functions, so pull it out into its own static method. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17diskspace: add _alpm_check_downloadspace()Dave Reisner
This function determines if the given cachedir has at least the given amount of free space on it. This will be later used in the sync code to preemptively halt downloads. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Table display: print message with warning: prefixDan McGee
Use the normal error functions here rather than a bare fprintf(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Large performance improvement for check for owned directoriesDan McGee
We can take a large shortcut here that saves us a lot of time, especially when upgrading packages with lots of directories. Obviously iterating the full file list of every single package to determine if this directory was present in any other package can take quite some time on a system with many packages installed. We don't need to remove a directory at all if we are upgrading a package and the version we are moving to still had the directory. Also make a small optimization on the package comparsion- we really only care about equality here, not the result of the compare, so we can shortcut using our name_hash. What kind of benefit does this give us? Oh, only a reduction from 295.7 million to 1.4 million strcmp() calls (99.5% fewer) during a `pacman -S linux libreoffice-common` operation. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Make _alpm_filelist_contains() NULL-safeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Merge branch 'maint'Dan McGee
2011-10-14makepkg: don't attach traps until after argument parsingDan McGee
Nothing we do in our traps is necessary this early in the script. This fixes FS#26196. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Use fputs and putchar in callback progress displayDan McGee
When we have fixed strings or output, printf overhead is unnecessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Remove -f short option for --forceDan McGee
This is not something that should be used on a frequent basis, and giving it a short option encourages use without making the drawbacks obvious. For the 1% of situations that require it, the 5 extra keystrokes are a fair price to pay. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Add missing #ifdef around cURL error code in download structDan McGee
Thanks to Eduardo Tongson on the mailing list. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Use puts() instead of no-op printf() where applicableDan McGee
This replaces several printf calls of the following styles: printf("%s", ...); printf("some fixed string"); printf("x"); We can use either fputs() or putchar() here to do the same thing without incurring the overhead of the printf format parser. The biggest gain here comes when we are calling the print function in a loop repeatedly; notably when printing local package files. $ /usr/bin/time ./pacman-before -Ql | md5sum 0.25user 0.04system 0:00.30elapsed 98%CPU $ /usr/bin/time ./pacman-after -Ql | md5sum 0.17user 0.06system 0:00.25elapsed 94%CPU $ /usr/bin/time ./pacman-before -Qlq | md5sum 0.20user 0.05system 0:00.26elapsed 98%CPU $ /usr/bin/time ./pacman-after -Qlq | md5sum 0.15user 0.05system 0:00.23elapsed 93%CPU So '-Ql' shows a 17% improvement while '-Qlq' shows a 13% improvement on 382456 total files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Remove mcheck.h supportDan McGee
When was the last time anyone used this? That's what I thought. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Fix some strict 32-bit gcc warningsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Coding style cleanupsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>