summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-28be_sync.c: Fix memory leak in alpm_db_update()Lukas Fleischer
Free "syncpath" and restore umask if we fail to grab a lock. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28pacman.c: Remove redundant strdup() in parsearg_global()Lukas Fleischer
config_set_arch() already calls strdup(). Remove strdup() from the config_set_arch() invocation to avoid a memory leak. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Make sync error message smarter on unfound targetsDan McGee
We had two issues here. One is a file with an absolute path passed to -S results in a cryptic error message due to the database name being '\0'. The second is not realizing you should be doing -U instead of -S. Fix both of these to transform this: $ sudo pacman -S /tmp/binutils-2.21.1-2-i686.pkg.tar.xz error: database not found: to this: $ sudo pacman -S /tmp/binutils-2.21.1-2-i686.pkg.tar.xz error: target not found: /tmp/binutils-2.21.1-2-i686.pkg.tar.xz warning: '/tmp/binutils-2.21.1-2-i686.pkg.tar.xz' is a file, did you mean -U/--upgrade instead of -S/--sync? Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Fix possible mismatched type with several curl argumentsDan McGee
After commit 2e7d0023150664, we use off_t rather than long variables. Use the _LARGE variants of the methods to indicate we are passing off_t sized variables, and cast using (curl_off_t) accordingly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Always process validity value returned by gpgmeDan McGee
Don't force 'never'; you should be checking both the status and validity anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Fix small memory leak in sig check codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25strtrim: don't move empty stringDan McGee
There were many cases where the string coming in was a blank line, e.g. "\n\0", length 1. The trim routine starts by trimming leading spaces, thus trimming everything. We would then proceed to do a memmove of the NULL byte, which is completely worthless as we can just assign it instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove argument from check_pgp_helperDan McGee
This one wasn't all that necessary as we only used it in one place in the function, which can be checked easily enough at the call site. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove trans is NULL check in QUESTION/EVENT/PROGRESS macrosDan McGee
trans cannot (and better not) be NULL at any point when these are being called. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove short/long label distinctionDan McGee
We only used short labels in one place, and the short label is always the first character of the long label anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Slight refresh of the download progress callbackDan McGee
This cleans up some of the mess we have here. * switch to long units for the download size * omit the .0 decimal part from the download rate * omit the almost always zero HH: from estimated time if eta_h == 0 * Display --:-- if eta_h > 99; formatting was screwed up before The net result of this is we usually have 1 more character to use for filename display. Before: extra 500.9K 1242.4K/s 00:00:00 [######################] 100% community-testing 947.0B 28.2M/s 00:00:00 [######################] 100% multilib 26.5K 405.1K/s 00:00:00 [######################] 100% community 450.6K 1238.3K/s 00:00:00 [######################] 100% After: extra 500.9 KiB 1118K/s 00:00 [######################] 100% community-testing 947.0 B 23M/s 00:00 [######################] 100% multilib 26.5 KiB 255K/s 00:00 [######################] 100% community 450.6 KiB 1211K/s 00:00 [######################] 100% Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Add a few more sizes to humanize_sizes()Dan McGee
Because why the hell not? Exbibyte, zebibyte, and yobibyte are going in, even though nothing bigger than the 2^60 exbibyte can be represented using an off_t variable anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Finish large file download attack preventionDan McGee
This handles the no Content-Length header problem as stated in the comments of FS#23413. We add a quick check to the callback that will force an abort if the downloaded data exceeds the payload size, and then check for this error in the post-download cleanup code. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Use off_t rather than double where possibleDan McGee
Beautiful of libcurl to use floating point types for what are never fractional values. We can do better, and we usually want these values in their integer form anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Add new 'lt' and 'zh_TW' translations from transifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Update existing translations from TransifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-24Improved alpm_list_mmerge() performance (fixed coding style)Diogo Sousa
Improved alpm_list_mmerge() performance by removing an extra pass to obtain the tail node. This was actually suggested by a TODO comment. Signed-off-by: Diogo Sousa <diogogsousa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23vercmp: ensure 2.0a and 2.0.a do not compare equalDan McGee
We had this interesting set of facts conundrum, according to vercmp return values: 2.0a < 2.0 2.0 < 2.0.a 2.0a == 2.0.a This introduces a code change that ensures '2.0a < 2.0.a' as would be expected by the first two comparisons. Unfortunately this stays us a bit further from upstream RPM code, but those are the breaks (in RPM, the versions involving 'a' do in fact compare the same, but they are both greater than the bare '2.0'). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23Style-match rpmvercmp code with upstreamDan McGee
Not sure how or why some of this differed, but it is easy enough to set it back to how it was so it is easier to diff. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23Retrieve default SigLevel value from backend after initial settingDan McGee
This ensures we grab and use the library default once we have processed the global SigLevel setting, but before processing the repo-specific settings. This means the following two configs will now evaluate the same, as the backend currently defaults to 'Optional': Config 1: [options] # nothing here [repo] SigLevel = TrustAll Config 2: [options] SigLevel = Optional [repo] SigLevel = TrustAll Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23sync: halt file discovery if repo has no serversDave Reisner
This avoids error spam when no servers are configured for a repo and a sync operation is performed: Proceed with installation? [Y/n] y :: Retrieving packages from testing... warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing warning: failed to retrieve some files from testing Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22Fix formatting in pacman-key manpageJakob Gruber
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: prevent need to copy struct in mask_signal()Dan McGee
Since we store this directly in the download function, just rework mask_signal() to take a pointer to a location to store the original. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: extract tempfile creation to its own functionDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: move (un)masking of signals to separate functionsDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: move curl option setting to static functionDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: add open_mode to payload structDave Reisner
This is a precursor to a following patch which will move the setting of options to a separate function. With the open mode as part of the struct, we can avoid modifying stack allocated variables. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: rename cd_filename to content_disp_nameDave Reisner
This is more in line with the menagerie of file name members that we now have on the payload struct. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22dload: move tempfile and destfile to payload structDave Reisner
These are private to the download operation already, so glob them onto the struct. This is an ugly rename patch, with the only logical change being that destfile and tempfile are now freed by the payload_free function. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22pacman/util: use string_length to calculate line lengthDave Reisner
This is measuring strings that are potentially localized, so we need a multibyte aware function to count characters instead of bytes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22Print callback messages to stderrAllan McRae
Fixes FS#25099. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22Print debug timestamps to same stream as rest of outputDan McGee
We used fprintf() elsewhere in this function, but we didn't use it on the debug timestamp printing. Use fprintf() instead of printf() to fix this. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22pacsort: correct list freeingPang Yan Han
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22pacsort: ensure list is freed if size is 0Dan McGee
Found using: `valgrind ./src/util/.libs/lt-pacsort /dev/null` Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22pacsort: correct pointer type in list_newPang Yan Han
Pointer sizes are the same but this makes intention clearer. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19Remove alpm_option_get_* usage from backendDan McGee
These are all available directly on the handle without indirection. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: remove unused macroDave Reisner
This was a vestige leftover from the libfetch days of yore. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: delete zero length downloads on curl errorDave Reisner
In the case of a non-operation (e.g. DNS resolver error), delete the leftover 0 byte .part file. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: rename payload->filename to payload->remote_nameDave Reisner
This is a far more accurate description of what this is, since it's more than likely not really a filename at all, but the name after a final slash on a URL. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: remove code duplicationDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19bash_completion: add dbonly to sync optionsDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19Rework finding a writable cache directoryDan McGee
This is a refactor and refresh of the code used to find where we should download packages. * Incorporate suggestions from FS#25435 to use TMPDIR from the environment if set, otherwise fall back to /tmp as before. * Make the writability tests a bit more in depth. We now do a three part check consisting of: - S_ISDIR(): is this even a directory - access(W_OK): is this directory writable by the current user. Unfortunately for root, this almost always returns that it is, but in the case of a RO mount or NFS share inaccessible to root, this check will exclude the directory. - mode & (any write bit): is there a writable bit set on this directory. This makes it possible to enforce a read-only cache directory by setting permissions to 0555, for example. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19Be more robust when copying package dataDan McGee
This changes the signature of _alpm_pkg_dup() to return an integer error code and provide the new package in a passed pointer argument. All callers are now more robust with checking the return value of this function to ensure a fatal error did not occur. We allow load failures to proceed as otherwise we have a chicken and egg problem- if a 'desc' local database entry is missing, the best way of restoring said file is `pacman -Sf --dbonly packagename`. This patch fixes a segfault that was occurring in this case. Fixes the segfault reported in FS#25667. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19lib/dload: unlink on response code >=400Dave Reisner
ftp and http both define >=400 as being "something bad happened" Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19dload: add 'unlink_on_fail' to payload structDave Reisner
Let callers of _alpm_download state whether we should delete on fail, rather than inferring it from context. We still override this decision and always unlink when a temp file is used. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19makepkg: quote re-evaluation of simple varsDave Reisner
This is a safety measure to prevent simple code injection. $ i="foo bar" $ eval i="$i" bash: bar: command not found $ eval i=\"$i\" $ echo "|$i|" |foo bar| Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19lib/dload: prevent possible NULL dereferenceDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19sync: fix garbled output in conflict promptDave Reisner
$ pacman -S cronie resolving dependencies... looking for inter-conflicts... :: cronie and fcron are in conflict (@.). Remove fcron? [y/N] n $ sudo pacman -S pacman resolving dependencies... looking for inter-conflicts... :: pacman and pacman-git are in conflict (pKÈ). Remove pacman-git? [y/N] Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18makepkg: deal with variable substitution when checking sanityAllan McRae
If any of pkgver, pkgrel or epoch contained a variable substitution, then it needed to be evaluated before checking its value conformed to the rules. [Dan: add quotes around RHS] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18doc/PKGBUILD: update regarding versioned package fieldsDan McGee
Add the info that versioned replaces are now supported, as well as beefing up some of the other places touching on versioned fields. Signed-off-by: Dan McGee <dan@archlinux.org>