summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-09-23libalpm/add.c: fix backup array issueDan McGee
As seen with the recent upgrade of pacman and the removal of the pacman.d/current mirrorlist, files that were formerly in the backup array get deleted upon their removal, which could be dangerous. Instead, we should use the combined backup array of the old and new package. This fix should address this issue in a relatively straightforward way. In addition, old files should be moved to pacsave locations as expected. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-23Add sync044 pactest : A dependency induces a replacement.Chantry Xavier
That is the problem mentioned by Nagy there (with suggestions for fixing it) : http://www.archlinux.org/pipermail/pacman-dev/2007-August/009082.html If a dependency conflicts with a local package and has to replace it, the PM_SYNC_TYPE_DEPEND information is lost, and the resulting install reason is wrong (the package is marked as explictly installed). Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-23Add two pactests with broken requiredby, and two about pacsave handling.Chantry Xavier
remove048 is the case mentioned there (fails in 3.0 but works in 3.1) : http://www.archlinux.org/pipermail/pacman-dev/2007-September/009294.html It's the same as remove046 with -R instead of -Rc. sync060 is a case reported this morning on IRC : a pacman -Su wanted to replace gensplashutils by gensplash, but pacman said gensplashutils was required by initscripts-gensplash, while initscripts-gensplash was not even installed. This is also fixed in the current 3.1 code though. upgrade02{4,5} are the backup handling problem I described there : http://www.archlinux.org/pipermail/pacman-dev/2007-September/009376.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-23libalpm/remove.c: fix up arguments to unlink_fileDan McGee
Move the progressbar code out of unlink_file so we can pass half the args. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-23alpm: removed unused strtoupper wrapper, remove installeddate on parse_descfileDan McGee
installdate should never be present in a package descfile, so get rid of it. With the last commit, we also don't need the util strtoupper function. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-23libalpm/package.c : fix for FS#8081, case sensitive comparisons in ↵Chantry Xavier
parse_descfile. This fix FS#8081. The tr_TR locale has known issue with case insensitive comparisons, mostly because upper(i) != I. So the .PKGINFO files generated by makepkg MUST contain all keywords in lowercases now. This was already done, but was not mandatory. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-18libalpm/add.c : fix backup handling (2)Chantry Xavier
The mistake fixed in commit 26441cf65ca10d4bf218203df5db5e8a7270787b was actually done at two places. This fix the second one. Also remove one unnecessary newline introduced by commit d34b2c4ed84bc40f4a895846785481fad88116a2 Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-18Update NEWS, -S testing/qt example, and mirrorlist changeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-17Refine pacman manpage, clarify -S repo/package possibility, remove --testDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-17libalpm/add.c : newline fix.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-17Avoid segfaults whet calling alpm_option_get_* before initializationStefano Esposito
When calling a function of the alpm_option_get_* group, you get a segfault if you don't call alpm_initialize() first. With this patch those functions set pm_errno to PM_ERR_HANDLE_NULL and return an error value if handle == NULL. (Dan: modified to meet pacman coding standards) Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-17Update British English translationJeff Bailes
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-17Allow rankmirrors to read from stdinPeter Johnson
Feature Request #8043 and provided patch. Thanks! Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-17Add Australian mirrorDan McGee
Thanks to Jeff Bailes <thepizzaking@gmail.com> for pointing this out. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-17rankmirrors : add support for the $repo var in url.Chantry Xavier
To keep working correctly with url like : ftp://ftp.archlinux.org/$repo/os/i686 rankmirrors will now replace $repo by core. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-16Merge branch 'asciidoc' into workingDan McGee
We're getting close to release, so might as well do this now so people can actually update some of our documentation.
2007-09-16trans.c : reworking of transaction interruptionsChantry Xavier
My two previous hacks related to this part (8038190c7c4786e1c49494eea1b40cdddcbd5136 and b15a5194d1a8485a2769560e49e6ff03e1862533) were caused by the lack of understanding of a feature introduced a while ago: Better control over CTRL-C interruptions -- do not leave the DB in an inconsistent state (54008798efcc9646f622f6b052ecd83281d57cda). Now I have been looking at this commit, and the added feature is indeed interesting. The main problem I had with it is that it does a rather unusual use of alpm_trans_release, which caused a few problems that I tried to fix in a weird way. I think these problems were caused by the fact that there weren't any difference between "interrupt transaction" and "release a transaction which failed" actions from the alpm_trans_release POV. So I decided to add a new function instead, alpm_trans_interrupt, which is called on Ctrl+C, and which only sets trans->state to STATE_INTERRUPTED so that remove_commit and add_commit can exit cleanly at a safe moment. This allowed me to revert my two previous hacks as well. Also ensure we handle SIGINT correctly in all cases- if a transaction is not ongoing, then we can free the transaction and exit quickly. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-16Remove the DB consistency check from pacman and libalpm.Chantry Xavier
This reverts commit dfc85cb5f516ffbcff557522e9703c5c7d88b047 and b6f3fe6957d0206485eac98fb2120578b75d0058. This DB check is already in testdb (among others). Also testdb now uses the db path set at make time by default, so specifying the db path is optional. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-16Remove a dead mirror, update contrib/pacsearch for core changeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-16Add new Russian mirrorDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-16Make changes for Arch Linux current -> core changeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-11Add testdb util for finding inconsistencies in the database.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-11make alpm_strerror binding friendlyStefano Esposito
I'm currently working on python bindings for alpm written in pyrex. While working i found that declaring alpm_strerror as char * alpm_strerror (void) instead of char * alpm_strerror (int err) and then using pm_errno in the implementation instead of err, could make it more bindings-friendly. Dan: cleaned up and added void to declaration. Instead of replacing existing function, add a new function called 'alpm_strerrorlast(void)'. Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-11libalpm/deps.c : export _alpm_checkdeps (-> alpm_checkdeps).Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-11libalpm/package.c : add new alpm_pkg_compute_requiredby function.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-11Make some small changes recommended by splintDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-06Fix sync db location in pactest so new location is acceptableDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-06libalpm/trans.c : remove the lock even on interrupted transactions.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-06Add a few pactests collected over time.Chantry Xavier
remove047 : Remove a package required by other packages conflict004 : a package conflicts with itself http://www.archlinux.org/pipermail/pacman-dev/2007-August/009077.html sync400 : Install package with dep that conflicts with older version of package sync401 : Ensure we choose provider already in target list http://www.archlinux.org/pipermail/pacman-dev/2007-July/009041.html sync402/sync403 (failing) : Choice between two providers http://www.archlinux.org/pipermail/pacman-dev/2007-July/008787.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-06scripts/*.sh.in: Clean up and fix a few bugsAndrew Fyfe
repo-add, repo-remove: 'bsdtar -c * | ...' doesn't work (you need '-f -'). Code clean up eliminated this bug. Removed the multiple checksum support, pacman now only supports MD5, so there's no need for the database to contain multiple checksums. Quote all variables containing file/dir names to prevent paths containing spaces from causing problems. Add msg, warning and error functions. General code clean up. pacman-optimize: Use a sub-directory in /tmp for working files to make it easier to clean up at the end. Add quotes round $@ in die and die_r, otherwise printf can't display the message correctly. makepkg: Disable colour output if stderr is not a tty. Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-09-06Add a few missing includes, caught while compiling on cygwinDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-05contrib : update zsh and bash completion to reflect the new sync dbs location.Chantry Xavier
I wonder how many tools / scripts deal directly with the sync databases under /var/lib/pacman/ , I doubt these are the only ones. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-09-04libalpm: remove outdated files from POTFILES.inDan McGee
Fixes 'make dist' target as sha1.c and md5driver.c no longer exist. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-03Fix compile-time error with de.po, runtime error with db.cTravis Willard
One string in de.po differed pretty strongly with its translated version. It may still be totally wrong as far as translations go, but it compiles now. Get translater to check. Also, ensure the proper dbpath gets set in the db when it's created. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-03Add new mirrorDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-02Update German translationMatthias Gorissen
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-02libalpm/remove.c : avoid duplicated packages in removal list.Chantry Xavier
Suppose a package foo depends on foo1, foo2, ..., foon. Doing pacman -Rc foo1 foo2 ... foon added foo n times to the removal list, because what checkdeps return is something like : foo1 is requiredby foo foo2 is requiredby foo ... foon is requiredby foo Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-30Update po/hu.poNagy Gabor
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-26separate local from sync dbs on filesystemTravis Willard
Introduce two new methods into the API - alpm_db_register_sync and alpm_db_register_local, which replace the functionality of alpm_db_register. db_register_local always returns the local DB, and db_register_sync will always try to register a sync DB. This conceptually separates the local DB from sync DBs in the code. Also updated the pacman frontend to use the new functions. In addition, this changes the location of all sync DBs in the filesystem from $DBPATH/$REPO to $DBPATH/sync/$REPO, This removes the silly limitation that a sync DB couldn't be named 'local', along with structurally separating sync DBs and the local DB in the filesystem. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-26libalpm/add.c : fix backup handling.Chantry Xavier
During last refactoring, a "continue" somehow became a "return(0)" :) Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-08-26pacman/sync.c : kill extra newline with groups on -Ss operation.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-08-26scripts/makepkg.sh.in: Add missing [Andrew Fyfe
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-08-23libalpm: add newlines to all strings passed to log callbackDan McGee
This allows us to remove the hack in the frontend where we added a newline to everything coming out of the pm_printf functions, and instead let the developer put newlines where they want them. This should be the last hangover of that auto-newline stuff. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-23libalpm/remove.c: check for ability to unlink is wrongDan McGee
As reported by JGC in FS #7652, the check for EACCES is not exactly correct. We need to check for the ETXTBSY error as well. This is necessary on FreeBSD. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-23makepkg : add -L (--dereference) to file.Chantry Xavier
makepkg didn't correctly detect the type of the archive since it didn't dereference symlinks, and so failed to extract the source tarball. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-22pacman.c: clarify reason for doing 2 strcmp operationsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-21configure.ac: Remove the hyphen from the version suffixDan McGee
Also switch out outdated PACKAGE_STRING variable for pacman_display_version. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-21Various valgrind mem leak fixesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-21Add a default cachedir if one wasn't specifiedDan McGee
Use the default cachedir (specified at compile time) if one wasn't specified on the command line or in the config file. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-21Post trial install changes, round oneDan McGee
A bunch of changes related to my first "real" install of pacman-git into /usr/local and trying to use it. * Shift some uses of free -> FREE in libalpm. * Move stat and sanity checks of config paths into libalpm from the config and argument parsing in pacman.c. * Fix issue where dbpath still was not defined early enough due to its requirement for being used in alpm_db_register. This should be rewritten so it doesn't have this dependency, but this will work for now. Signed-off-by: Dan McGee <dan@archlinux.org>