diff options
Diffstat (limited to '.emacs.d/org-7.4/contrib/babel/langs/ob-oz.el')
| -rw-r--r-- | .emacs.d/org-7.4/contrib/babel/langs/ob-oz.el | 306 |
1 files changed, 0 insertions, 306 deletions
diff --git a/.emacs.d/org-7.4/contrib/babel/langs/ob-oz.el b/.emacs.d/org-7.4/contrib/babel/langs/ob-oz.el deleted file mode 100644 index e1e6e35..0000000 --- a/.emacs.d/org-7.4/contrib/babel/langs/ob-oz.el +++ /dev/null @@ -1,306 +0,0 @@ -;;; ob-oz.el --- org-babel functions for Oz evaluation - -;; Copyright (C) 2009 Torsten Anders and Eric Schulte - -;; Author: Torsten Anders and Eric Schulte -;; Keywords: literate programming, reproducible research -;; Homepage: http://orgmode.org -;; Version: 0.01 - -;;; License: - -;; This program is free software; you can redistribute it and/or modify -;; it under the terms of the GNU General Public License as published by -;; the Free Software Foundation; either version 3, or (at your option) -;; any later version. -;; -;; This program is distributed in the hope that it will be useful, -;; but WITHOUT ANY WARRANTY; without even the implied warranty of -;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -;; GNU General Public License for more details. -;; -;; You should have received a copy of the GNU General Public License -;; along with GNU Emacs; see the file COPYING. If not, write to the -;; Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -;; Boston, MA 02110-1301, USA. - -;;; Commentary: - -;; Org-Babel support for evaluating Oz source code. -;; -;; Oz code is always send to the Oz Programming Environment (OPI), the -;; Emacs mode and compiler interface for Oz programs. Therefore, only -;; session mode is supported. In practice, non-session code blocks are -;; handled equally well by the session mode. However, only a single -;; session is supported. Consequently, the :session header argument is -;; ignored. -;; -;; The Org-babel header argument :results is interpreted as -;; follows. :results output requires the respective code block to be -;; an Oz statement and :results value requires an Oz -;; expression. Currently, results are only supported for expressions -;; (i.e. the result of :results output is always nil). -;; -;; Expression evaluation happens synchronously. Therefore there is an -;; additional header argument :wait-time <number>, which specifies the -;; maximum time to wait for the result of a given expression. nil -;; means to wait as long as it takes to get a result (potentially wait -;; forever). -;; -;; NOTE: Currently the copyright of this file may not be in a state to -;; permit inclusion as core software into Emacs or Org-mode. - -;;; Requirements: - -;; - Mozart Programming System, the implementation of the Oz -;; programming language (http://www.mozart-oz.org/), which includes -;; the major mode mozart for editing Oz programs. -;; -;; - StartOzServer.oz which is located in the contrib/scripts -;; directory of the Org-mode repository - -;;; TODO: - -;; - Decide: set communication to \\switch -threadedqueries? -;; -;; - Only start Oz compiler when required, e.g., load Org-babel only when needed? -;; -;; - Avoid synchronous evaluation to avoid blocking Emacs (complex -;; Strasheela programs can take long to find a result..). In order -;; to cleanly map code blocks to their associated results (which can -;; arrive then in any order) I could use IDs -;; (e.g. integers). However, how do I do concurrency in Emacs Lisp, -;; and how can I define org-babel-execute:oz concurrently. -;; -;; - Expressions are rarely used in Oz at the top-level, and using -;; them in documentation and Literate Programs will cause -;; confusion. Idea: hide expression from reader and instead show -;; them statement (e.g., MIDI output statement) and then include -;; result in Org file. Implementation: for expressions (:results -;; value) support an additional header argument that takes arbitrary -;; Oz code. This code is not seen by the reader, but will be used -;; for the actual expression at the end. Alternative: feed all -;; relevant code as statement (:results output), then add expression -;; as extra code block which outputs, e.g., file name (so the file -;; name must be accessible by global var), but the code of this -;; extra codeblock is not seen. Hm, in that case it might be even -;; more easy to manually add this link to the Org file. -;; - - -(require 'ob) -;;; major mode for editing Oz programs -(require 'mozart) - -;; -;; Interface to communicate with Oz. -;; (1) For statements without any results: oz-send-string -;; (2) For expressions with a single result: oz-send-string-expression -;; (defined in org-babel-oz-ResultsValue.el) -;; - -;; oz-send-string-expression implements an additional very direct -;; communication between Org-babel and the Oz compiler. Communication -;; with the Oz server works already without this code via the function -;; oz-send-string from mozart.el.in, but this function does not get -;; back any results from Oz to Emacs. The following code creates a -;; socket for sending code to the OPI compiler and results are -;; returned by the same socket. On the Oz side, a socket is opened and -;; conected to the compiler of the OPI (via oz-send-string). On the -;; Emacs side, a connection to this socket is created for feeding code -;; and receiving results. This additional communication channel to the -;; OPI compiler ensures that results are returned cleanly (e.g., only -;; the result of the sent code is returned, no parsing or any -;; processing of *Oz Emulator* is required). -;; -;; There is no buffer, nor sentinel involved. Oz code is send -;; directly, and results from Oz are send back, but Emacs Lisp -;; requires a filter function for processing results. - -(defvar org-babel-oz-server-dir - (file-name-as-directory - (expand-file-name - "scripts" - (file-name-as-directory - (expand-file-name - "../../.." - (file-name-directory (or load-file-name buffer-file-name)))))) - "Path to the contrib/scripts directory in which -StartOzServer.oz is located.") - -(defvar org-babel-oz-port 6001 - "Port for communicating with Oz compiler.") -(defvar org-babel-oz-OPI-socket nil - "Socket for communicating with OPI.") - -(defvar org-babel-oz-collected-result nil - "Aux var to hand result from org-babel-oz-filter to oz-send-string-expression.") -(defun org-babel-oz-filter (proc string) - "Processes output from socket org-babel-oz-OPI-socket." -;; (setq org-babel-oz-collected-results (cons string org-babel-oz-collected-results)) - (setq org-babel-oz-collected-result string) - ) - - -(defun org-babel-oz-create-socket () - (message "Create OPI socket for evaluating expressions") - ;; Start Oz directly - (run-oz) - ;; Create socket on Oz side (after Oz was started). - (oz-send-string (concat "\\insert '" org-babel-oz-server-dir "StartOzServer.oz'")) - ;; Wait until socket is created before connecting to it. - ;; Quick hack: wait 3 sec - ;; - ;; extending time to 30 secs does not help when starting Emacs for - ;; the first time (and computer does nothing else) - (sit-for 3) - ;; connect to OPI socket - (setq org-babel-oz-OPI-socket - ;; Creates a socket. I/O interface of Emacs sockets as for processes. - (open-network-stream "*Org-babel-OPI-socket*" nil "localhost" org-babel-oz-port)) - ;; install filter - (set-process-filter org-babel-oz-OPI-socket #'org-babel-oz-filter) -) - -;; communication with org-babel-oz-OPI-socket is asynchronous, but -;; oz-send-string-expression turns is into synchronous... -(defun oz-send-string-expression (string &optional wait-time) - "Similar to oz-send-string, oz-send-string-expression sends a string to the OPI compiler. However, string must be expression and this function returns the result of the expression (as string). oz-send-string-expression is synchronous, wait-time allows to specify a maximum wait time. After wait-time is over with no result, the function returns nil." - (if (not org-babel-oz-OPI-socket) - (org-babel-oz-create-socket)) - (let ((polling-delay 0.1) - result) - (process-send-string org-babel-oz-OPI-socket string) - ;; wait for result - (if wait-time - (let ((waited 0)) - (unwind-protect - (progn - (while - ;; stop loop if org-babel-oz-collected-result \= nil or waiting time is over - (not (or (not (equal org-babel-oz-collected-result nil)) - (> waited wait-time))) - (progn - (sit-for polling-delay) -;; (message "org-babel-oz: next polling iteration") - (setq waited (+ waited polling-delay)))) -;; (message "org-babel-oz: waiting over, got result or waiting timed out") -;; (message (format "wait-time: %s, waited: %s" wait-time waited)) - (setq result org-babel-oz-collected-result) - (setq org-babel-oz-collected-result nil)))) - (unwind-protect - (progn - (while (equal org-babel-oz-collected-result nil) - (sit-for polling-delay)) - (setq result org-babel-oz-collected-result) - (setq org-babel-oz-collected-result nil)))) - result)) - -(defun org-babel-expand-body:oz (body params &optional processed-params) - (let ((vars (second (or processed-params (org-babel-process-params params)))))) - (if vars - ;; only add var declarations if any variables are there - (concat - ;; prepend code to define all arguments passed to the code block - "local\n" - (mapconcat - (lambda (pair) - (format "%s=%s" - (car pair) - (org-babel-oz-var-to-oz (cdr pair)))) - vars "\n") "\n" - "in\n" - body - "end\n") - body)) - -(defun org-babel-execute:oz (body params) - "Execute a block of Oz code with org-babel. This function is -called by `org-babel-execute-src-block' via multiple-value-bind." - (let* ((processed-params (org-babel-process-params params)) -;; (session (org-babel-ruby-initiate-session (first processed-params))) - (vars (second processed-params)) -;; (result-params (third processed-params)) - (result-type (fourth processed-params)) - (full-body (org-babel-expand-body:oz body params processed-params)) - (wait-time (plist-get params :wait-time)) - ;; set the session if the session variable is non-nil -;; (session-buffer (org-babel-oz-initiate-session session)) -;; (session (org-babel-prep-session:oz session params)) - ) - ;; actually execute the source-code block - (org-babel-reassemble-table - (case result-type - (output - (progn - (message "Org-babel: executing Oz statement") - (oz-send-string full-body))) - (value - (progn - (message "Org-babel: executing Oz expression") - (oz-send-string-expression full-body (if wait-time - wait-time - 1))))) - (org-babel-pick-name (nth 4 processed-params) (cdr (assoc :colnames params))) - (org-babel-pick-name (nth 5 processed-params) (cdr (assoc :rownames params)))))) - -;; This function should be used to assign any variables in params in -;; the context of the session environment. -(defun org-babel-prep-session:oz (session params) - "Prepare SESSION according to the header arguments specified in PARAMS." - (error "org-babel-prep-session:oz unimplemented")) -;; TODO: testing... (copied from org-babel-haskell.el) -;; (defun org-babel-prep-session:oz (session params) -;; "Prepare SESSION according to the header arguments specified in PARAMS." -;; (save-window-excursion -;; (org-babel-oz-initiate-session session) -;; (let* ((vars (org-babel-ref-variables params)) -;; (var-lines (mapconcat ;; define any variables -;; (lambda (pair) -;; (format "%s=%s" -;; (car pair) -;; (org-babel-ruby-var-to-ruby (cdr pair)))) -;; vars "\n")) -;; (vars-file (concat (make-temp-file "org-babel-oz-vars") ".oz"))) -;; (when vars -;; (with-temp-buffer -;; (insert var-lines) (write-file vars-file) -;; (oz-mode) -;; ;; (inferior-oz-load-file) ; ?? -;; )) -;; (current-buffer)))) -;; - - -;; TODO: testing... (simplified version of def in org-babel-prep-session:ocaml) -;; -;; BUG: does not work yet. Error: ad-Orig-error: buffer none doesn't exist or has no process -;; UNUSED DEF -(defun org-babel-oz-initiate-session (&optional session params) - "If there is not a current inferior-process-buffer in SESSION -then create. Return the initialized session." - (unless (string= session "none") - ;; TODO: make it possible to have multiple sessions - (save-window-excursion - ;; (run-oz) - (get-buffer oz-compiler-buffer)))) - -(defun org-babel-oz-var-to-oz (var) - "Convert an elisp var into a string of Oz source code -specifying a var of the same value." - (if (listp var) -;; (concat "[" (mapconcat #'org-babel-oz-var-to-oz var ", ") "]") - (eval var) - (format "%s" var) ; don't preserve string quotes. -;; (format "%s" var) - )) - -;; TODO: -(defun org-babel-oz-table-or-string (results) - "If the results look like a table, then convert them into an -Emacs-lisp table, otherwise return the results as a string." - (error "org-babel-oz-table-or-string unimplemented")) - - -(provide 'ob-oz) -;;; org-babel-oz.el ends here |